Troubleshooting of my internet connection VISTA windows with my WINDOWS 7 based laptop router

Similar Questions

• Loss of internet connection on windows Vista Enterprise edition

  Hello

  I have a very serious problem, started only last Monday, I was using my laptop to last more than three years and having a problem just last week about the loss of internet connection after an hour or two after restarting the laptop.

  I thought that a virus could have an effect on this, so last night I reinstalled the operating system, but it does not work too. I connect to the internet via an ethernet to a motorola modem cable, do not know how to solve this problem now.

  I searched through various sites and followed quite a few options but that did not help. Still have a problem, someone please answer as soon as POSSIBLE. I have a very important session the game and on Fri and it will be very costly if I can't then I would like to be back to normal as soon as POSSIBLE.

  Go to the website of the manufacturer of your Modem > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Internet connection in windows vista issues

  Original title: connection problems

  Hi, I have a problem connecting to all programs use internet (like Skype; gameranger...) my system is windows vista family premium sp2 please help me!

  Hello

  Perform the steps in the article, and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://support.Microsoft.com/kb/936215

  Hope that helps.

• Long wait for the Internet connection at startup with Vista

  Basic box Vista my fiance started taking never catch an internet connection at startup. Since the arrival of her office up to the time that the red X little disappeared from the network in its tray icon took four and five minutes. I've tried everything to fix, but nothing has worked. I'm looking through its installed programs that is a bit like the Add/Remove program utility in windows XP THAT and I see what is called Hello. It is the software by Apple, which allows some other software network function. I think it installed when she got her new smart phone and install disks. In any case, I uninstalled Hello, restarted, and bingo!, completed internet connection for about ten seconds after the bureau came. So if you have a similar problem, check your list of programs and search for Hello. Uninstall it and see if it solves your problem of network in Windows Vista. If it doesn't, you can always reinstall Hello, if you really think that you need.

  Thank you for this report and congratulations to solve the problem.

  When I see Hello on a computer, it is usually the result of installation of iTunes.  iTunes uses to find the libraries shared over a network.   If you have a computer with iTunes, you need not Hello.  For more information, see Hello: frequently asked questions (FAQ). Steve Winograd, MS - MVP (Windows desktop experience)

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• Homestead sitebuilder does not see internet connection under Windows Vista

  Recently, I switched from Verizon internet home (very bad product) Qwest's high-speed wireless. No problem. However, I discovered that I have a problem with vista.

  First of all, microsoft updates would not download at all. I eliminated the firewall and done everything I could think and one day (had vista sp 1...) Yes, only had not updated in a while) it switched to automatic updates. Then it worked fine.

  My second problem is with my website building program. It is not the internet connection. If I have power of Attorney, the internet connection test is fine. I have no problem with my internet. I can get online every time that and fast. However, it is curious that my homestead sitebuilder program does not recognize. So I uninstalled the sitebuilder and tried to reinstall a clean install. The installation wizard starts and installs the first part, I hit then, and suddenly, I get a message error "Sitebuilder has stopped working; try to find a solution", in which he can never find the solution. So, I go to the site of the farm and download the zip file. I am able to install sitebuilder by these means, but then it takes forever to load on vista and never find the internet connection.

  Someone at - it solutions? It is a program that I use quite often and now I can only update online that allows me a limited capacity. BTW... I use firefox for my browser. Homestead accepts only the browser.

  Solutions?

  Hello

  You may need to contact the support for the site builder from homestead to reinstall.

  Also contact Qwest High Speed Internet connection to inquire the matter with an Internet connection.

• Loss of Internet connection and Windows 7

  In our headquarters, we have a desktop system running Windows 7, but also an iMac.  The two are connected to Apple's Time Capsule, which serves as a router and a backup for the iMac hard drive. (our Internet connection is cable Internet, by the way.)

  Since upgrading from Windows Vista to Windows 7, the Windows 7 Desktop faces of frequent Internet connection errors.  Generally, it loses the connection to the Internet several times per day.

  Today, it's the worst event we've seen so far (since the upgrade to Windows 7 last week).  We usually only an Internet connection for about 2-3 minutes, then it is lost and needs to be repaired.

  We enter the control panel > network and sharing Center > issues > Internet connections

  Let us Windows 7 automatically diagnose and repair the problem.

  Whenever he goes through the stages of diagnosis and repair, it ends by "reset the connection area card."

  At the end of the process - after everything has been repaired - we get the following report:

  "Default gateway is not available - fixed.

  Should what measures we take to permanently solve this problem?

  Moreover, the iMac does NOT have Internet connection issues whatsoever.

  Thanks in advance!

  I don't know what you use to assign addresses, so I guess it's a router of some sort. You will need to go to the website of manufacturers, look at the manual and know how to limit the DHCP address field. I changed mine to limit the address 192.168.1.200 thanks 192.168.1.250 DHCP assignment. Your router can use the 10. subnet, so your address may be different, depends on the manufacturer of the router, or if you use a DHCP, the scope with the DHCP server. Gives me 50 IP addresses for all the guests who may want to use wired or wireless connections and should be more than enough. This allows me to attributed to the 192.168.1.1 through 192.168.1.199 a device and not having to worry about the DHCP server, you try to use one that is applied continuously to a device (printer, switch, PC, server, virtual server, etc.).

  Once this configuration of your router, you will now need to assign a static ip address to your PC. All this is done for the network card.

  On the start menu:
  Control Panel
  Network and Internet
  Network and sharing Center
  In the right pane of network and sharing Center
  Change the settings of the card
  Double-click your network adapter
  Check the box «Détails»
  Note the following lines:
  Connection specific DNS (may or may not exist, depends on the provider)
  IPv4 subnet
  IPv4 default gateway
  IPv4 DNS servers

  Once you have written those down, you can close this box.
  You should be back at the "Local Area Connection Status" box.
  Select the option "Properties".
  Select 'Internet Protocol version 4 (TCP/IPv4)', which will be in a blue when selected.
  Now, select the option "Properties".
  "IP version 4 (TCP/IPv4) properties" box should have popped up. If so:
  Select the following text:
  "Use following IP address".
  In the IP address box, enter an IP address. Example: 192.168.1.20
  Press the tab, the subnet must fill automatically, otherwise, enter the "Subnet IPv4" value you noted in the above step. Examp, e: 255.255.255.0
  The bridge of dafult, enter the value of the above procedure. Example: 192.168.1.254

  Now switch to the next 2 boxes, DNS servers. You can have only 1 entry in DNS server of the DNS entry you noted from above.
  Enter the DNS servers that you noted above.

  If there is "Connection specific DNS" writing or entries, follow these steps (otherwise, skip the sections "Connection DNS"):
  Select the option "Advanced".
  The "Additional TCP/IP parameters" window should open
  Select the "DNS" tab

  If it has more than 1 input "Connection specific DNS", follow these steps:
  Select it "add DNS suffixes (in order):
  Select "Add..." »
  In the "suffix domain', enter the first connection specific DNS entry.
  Select the option 'Add '.
  Add all the specific DNS suffixes that you noted. You can enter one at a time.
  When the radio button finished choose "OK".

  If you have only 1 entry in "Connection specific DNS":
  Entitled "DNS suffix for this connection", enter the entry you noted above for the "specific" connection DNS
  When the radio button finished choose "OK".

  Check the "validate their output parameters.

  Select the radio button 'OK '.

  Select the radio button "close".

  You should see the "Windows Network Diagnostics' open and check for any problems. I hope that everything is fine and he says 'Troubleshooting couldn't identify the problem' and choose 'Close the Troubleshooter'.
  Close additional boxes or pop-ups that are open and check and make the connection sure allis. If not, go back and check all the steps. the most common are the IP addresses and gateways.

  Good luck. After back if it solves the problem.

• I have a slow Internet connection under Windows 7.

  My son has a new computer and I bought a wireless adapter, but we have problems with the connection. My two sons have computers identical but different adapters. We're working correctly the other seems slower than dial-up!

  Original title: Internet connectivity problem
  When checking its parameters, I noticed it says IPv6 connectivity shows no Internet access, so I was wondering if this is the problem. It is Windows 7 and using an ADD-NWU275v2 adapter. Drivers have been installed on the provided driver disk.
  I can provide any other necessary information and am generally pretty technically good with computers so will be able to follow the advice given.
  Thanks for any help. This is bugging me!

  Hello

  1. What is the brand and model of your computer?

  2. is the Internet connection works fine using the wired connection?

  3. you receive an error message?

  4. are you using Internet Explorer? If Yes, what version of IE are you using? Find out what version of Internet Explorer you are using

  http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using

  You can follow the suggestions and check out them.

  Method 1

  You can read the article.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Method 2

  You can follow the procedure in the article.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3

  Check to see if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as

  Method 4

  You can disable temporary of your security software.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: A firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• No Internet connection for Windows 8 applications

  I spent all day trying to figure why Windows 8 Apps does not connect to the internet. I tried everything I read refreshing short or reinstallation of windows 8. I'm trying to be patient, but it reminds me of vista. I use Toshiba Satellite P755 2nd gen mobile i7 with 8 GB of ram. I have not installed third-party security, I only use Defender

  So far, I have:

  -Tried a clean boot (no difference)

  -Tried to open a session on Microsoft and on an account. When I tried to log into my account from Microsoft, he said: "we could not connect to the Microsoft services right now.

  -Tried many guests from commands such as sfc/scannow and more

  -Tried to disable the firewall (no difference)

  -Checked to make sure there are no proxy settings (it was not)

  -Checked the time zone settings (no problem)

  -Tried to install Fiddler4 (Nope)

  -J' tried Microsofts app troubleshooting. (No)

  -J' tried Windows 8 troubleshooting of network (Nope)

  -check the resolution of the screen (no problem)

  -Checked UAC (user account control). (No problem)

  -Verified this update of windows is up to date

  -Deleted all temporary files and erased Max

  -Check that the network card drivers and the display are updated

  -I do not know there is more that I don't remember

  Suggestions... :-/

  Hi Jeff,

  As you've already tried the troubleshooting steps, I suggest for the link and try to refresh the computer:

  How to restore, refresh or reset your PC

  Note: refresh the computer will not remove not remove files or change your settings. The apps that came with the computer or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh the computer.

  It will be useful.

• Problems of internet connection of Bluetooth with Nokia 6680

  Hello

  After a reinstall of Windows on my laptop Portege R200, I'm not able to install a new connection using the connection from the bluetooth stack Wizard more. This only happens for the express installation of the battery, I want to do for internet connection. Connect bluetooth to your mobile generally is working, as it is the Nokia PC Suite application. Re-install the software doesn't seem to work.

  Test a little, I discovered the following:
  -L' Connection Wizard (either automatically or manually) is not mobile and authentication works without problems as well. But after this step, an error message appears saying that the connection cannot be established
  -If I use manual mode to create a connection error occurs after you choose the COM port
  -At the manual installation: if I use some other than 40 COM-port, the error no longer appears and it continues with the installation of the modem
  -Use of the program of COM Local Bluetooth to add a port, I get an error of creation of the port COM-40, too
  -40 COM port is not used by another application

  No idea what could cause this problem?

  Hello

  Did you use the Bluetooth connection before the reinstallation of the Windows operating system?
  It was working properly?
  Unfortunately I do not have a Bluetooth specification, but I recommend you to download the latest version of battery Bluetooth m.
  Check out this Web of Toshiba Bluetooth site:
  http://APS.toshiba-tro.de/Bluetooth/

  You will find a lot of descriptions.

• internet connection problems Windows xp

  my windows xp laptop does not connect to the internet. tried to restart. Netshell.dll, refreshing and the other two? NetMan? only work... any basic information would be great. I tried the installation Wizard but wont even boot to the top. He's here. theres no icon on the desktop or whatever it is to show a network. any help please!

  Hi jimmyschaff,

  1. Did you the latest changes on the computer?
  2. Are what Wizard you referring?
  3. When was the last time it was working fine?
  4. What is the type of internet connection you use?
  5. What happens when you try to connect to the internet?

   

  Check out the articles below and try the steps mentioned, check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• Set the sharing of internet connection using Windows XP & Windows 7 (two laptops). __

  We have two Toshiba laptops, using a Windows XP operating system and the other Windows 7 operating system.  We use a UM175 Verizon Wireless Modem so that in the United States (we are snowbirds) and an Internet Mobile Rogers stick to the Canada.  I have read the article on http://support.microsoft.com/kb/306126 and would like to know if this procedure would allow us to be able to connect two laptops to a modem for internet connection.
  Thank you for your help.

  Use this procedure to connect the modem to the Windows XP computer wirelessly and share the Internet connection with Windows 7 computer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Slow internet connection in Windows 7

  Original title: Twelvebore1

  Internet problems.

  Vpcl12M1E Sony PC running Windows 7.

  It functions fine but Internet at a snails pace. Many worked for five years and then the trouble started recently.

  Reset the modem and ran Norton and Malwarebytes, no problem. An iPhone and two iPads can connect to between 19 and 20 Mbs to the same wireless network, the PC can barely do 1Mbs. takes about 30/40 seconds to load a page from Google.

  In desperation I used the recovery disc to clean the disk and start over. Despite this I still have the same problem. It makes no difference between cable and wireless - pace of snails still speed

  Could still be a virus?

  My network card may be faulty?

  Please help my old gray head is losing his hair.

  Hi Peter,.

  Thank you for responding.

  As the troubleshooter for troubleshooting Internet connection problems might not solve your problem, this problem could be due to corrupted or outdated drivers network card. Try it below and check if it helps.

  I suggest you try the troubleshooting steps mentioned in the Microsoft article below and check out them.

  Reference: why is my Internet connection so slow?

  It will be useful. Please perform the above methods and update the status of this issue, we will be happy to help you.

• Slow Internet connection on Windows 7

  I have Windows 7 Home installed in my HP laptop. Web brosing speed is too slow on the PC. I have a fiber optic internet connection which has max of 16 Mbps download speed. The internet speed is good and reaches sometimes up to 10 Mbit/s, while it barely reaches 2 Mbit/s in normal mode. Most of the programs I uninstalled, run the registry cleaner by Norton, Scanner Malware bytes, regularly updated Norton antivirus definitions. I also installed only a few program - MS Office 2010, Norton Antivirus, Real Networks, itunes and HP provided software preinstalled with the laptop. Internet activity is limited to a few Bank sites and youtube. Like all the anti virus scan, spyware scans were not able to detect any virus or spyware, I'm at a loss to find any reason for the slow internet speeds. The speed of the internet is amazing when I use my tab Thosibha or on my smart phone Sony. Any ideas please.

  I have this noted in may 2013 and unfortunately do not have the restore point beyond June 2013.

  Hello Krishna,

  1. have you tried to update the wireless network card drivers?

  2. What is the brand and model of the computer?

  Method 1:

  Visit this link and check the information on the Internet which is slow.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  
  Note: when you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  Try to update the drivers for wireless card and check:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps. If you have any other questions feel free to respond and we will be happy to help you.

• speed up your internet connection in Windows 8

  I've seen a lot of messages that mention users notice a slow internet connection more after moving to Windows 8 for the wired connections and wireless.

  Many of these problems are due to drivers still set up for network cards.  However, there are a little more at stake.  Windows 8 has many built-in features that use internet connection permanently.  Specifically, I am referring to many of the 'live' on Metro user interface applications.  These include things like pulling photos from Facebook, update of headlines and weather updates.  To account for these features Microsoft allows Windows to reserve a percentage of bandwidth for these features.

  It is less noticeable on connections faster broadband, but can be significant on slower connections.  Here are some things you can try to speed up the connection.

  1 make sure you have the correct driver installed.

  HP plans to support most of the laptops purchased after October 1, 2011.  You can check to see if HP has tested your laptop with Windows 8 by visiting this Web site.

  Currently, many hardware manufacturers have drivers available.  However, the first step is to check that it is not a specific driver available for your laptop computer network hardware.  You will need to follow the following instructions locate the number for your product.  After your head number product on HP's Support site and see if there are all the drivers available.  If so, install the appropriate driver.  If this is not the case, bookmark the page and check back regularly for updates.

  2. turn off or lower the amount of reserved bandwidth.

  As stated previously, Windows 8 automatically reserves a percentage of bandwidth for use with 'live' on Metro user interface applications.  First of all, you want to access the "Run" dialog box... ».  You can do this in the office or the metro by pressing Windows + X key combination and selecting 'run '.  You can type "gpedit.msc" and press ENTER.  On the left side, you will see "Configuration of the computer;" expand this list by clicking the arrow to the left.  Once this section is expanded you can select and expand "Administrative Templates" section, and then expand the "Network" section  Finally, you will see an entry called "QoS Packet" schedular, select this option.   After you select the QoS Packet Scheduler, you will see that the main part of the window has been set.  You will want to select "bookable bandwidth limit.    You can either reduce the percentage that is reserved or turn it off completely from here.  This should help speed up the internet connection.

  I hope this information is useful!