Quosmio G20-110: no sound after I removed SoundMax

Similar Questions

• No sound after the removal of Norton and Mcaffe installation

  No sound after the removal of Norton and Mcaffe installation

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Paviilion p7-1010: NO SOUND AFTER VIRUS REMOVAL

  I took the PC for Staples to have checked and viruses, spyware, malware was found.  These have been removed and all cleaned up.  Now I have no sound.  I have tried everything I can think of nothing doesn't.

  Can anyone help?

  @CHUCKL1

  Go to Device Manager and uninstall the device.

  If he asks me to remove the drivers say yes or OK.

  Then run the link I posted.

  Then restart.

  REO

• HP Mini 110 - no sound after replacing hard drive and install XP

  Mini 110 my wife died recently and I had to replace the hard drive.  I got everything up and working well except for the audio.  The driver on the HP website for the 110 will not install as it is said that there is no device installed for this driver.  In the list of hardware, there is a PCI Device with a question mark, and I can't seem to find a driver.  Even after the installation of the driver chipset and bios flashing, there is not audio device work.

  There, can anyone help?  I would really appreciate it!

  Try to install the audio driver from here and check... ftp://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44799.exe

• Quosmio G20-106: issue of Windows Server 2003 and the Fn keys +.

  I installed Windows Server 2003 on my Quosmio G20-106.

  After I installed all possible drivers and saving Toshiba download area, I have still 3 features in the "Other devices" section: eHome Infrared Tranciever, network card and the PCI device.

  In addition, Fn + keys do not work, I can not change the brightness.

  Any ideas?

  Hello

  Well, as far as I know the Qosmio G20 was delivered with Windows XP MCE.
  I found the drivers on the Toshiba site, and it seems they are designed only for Win XP and Win XP MCE. In this case, it is possible to s as the FN keys and other devices don't work.
  Nevertheless, it seems to install the LAN driver and modem driver.

  I found on the Web from Toshiba site a FAQ How to identify an unknown device
  Please visit this site:

  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Good bye

• G20-110: the cursor flies off - erratic keys?

  Howdy,
  Just bought a "G20-110' and I have problems when entering.» I'll be happily typing away and then all of a sudden the cursor somewhere flys and removed characters? .. .anyone else facing this problem or have any idea why this is happening?

  Press Fn + F9 to turn off the touchpad while you type.
  Later,.

  Alcahest

• Satellite L350D - 12 M PSLE0E - no sound after installing Win XP

  Hello

  I installed Win XP SP3 on my Tosh laptop.
  I have everything works except the sound.

  We know of a compatible for this model sound card driver in XP.
  I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.

  I'm really struggling with this one and do not want to go back to Vista.

  Reall any help is appreciated. Robbie.

  Hello

  I had the same problem with sound after installing XP everything seemed fine but no sound!

  I found a solution;
  You need to install the MS patches; KB835221 and KB888111
  These hotfixes must be installed before installing driver sound!

  But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.

  However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.

  Well, in my case it worked so it should work on your laptop too!

• No sound after sp1 and sp2 update... How to fix?

  After the upgrade to sp1 and sp2 and ie9, I have no sound on my acer aspire 5610Z... has almost everything to solve the problem without success. No start the thread more don't sound, no sound on youtube, or through any browser either. Yahoo Messenger does not even recognize my microphone and speakers...

  Although, I installed the latest version of the realtek driver, I hear my sounds of yahoo pool and the speaker works... However, tests sounds in windows, does not!
  How to get her back!     .. Help!...
  Please return answer: * e-mail address is removed from the privacy *.

  Hi ClaraKlambauer,

  You get the error message?

  Method 1: Users have solved similar issue by following the steps mentioned in the link below http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/i-have-no-sound-after-installing-a-service-pack/f16247af-313a-418d-915e-6403012c25eb

  Method 2: You can follow the steps mentioned in the link below

  No noise in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• No sound after installing windows 7 ultimate.

  I bought a new HARD drive, installed windows 7 ultimate, there is no sound after installing windows7 ultimate.

  When I attach my old HARD drive, windows XP, I get the sound.

  Device Manager shows no error.

  Pls correct me or direct me to over come this problem

  email * address email is removed from the privacy *

  Thank you

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

  Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

  Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

• HP d530: no sound after installing windows 7

  Help, please:

  My HP d530 sff (DG058A) no sound after that I installed windows 7, I think it is an ADI SoundMax AC97 Integrated Digital Audio Driver. Can you please link me to the driver audio latset.

  Concerning

  Hello:

  You should be able to use the driver Vista support page of your PC.  Install and reboot the PC.

  This package contains the audio driver for the ADI AC97 Digital Audio Controller integrated in the supported desktop models and operating systems. -Provides the initial version of the drivers for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp36501-37000/sp36530.exe

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• No sound after upgrade to Vista on U-series of satellite - solution

  Hi, I had the problem that I had no sound after upgrade to Vista Business.

  After several attempts to get a solution from Toshiba I found myself.

  Here are the steps to resolve this problem:

  1. update the Bios to version 3.5
  2 do a clean install of Vista
  3. install the added value of package
  4 install the audio driver
  5 install the patch "mute off".

  Should work now.

  Hey wow, it's really nice. Already bookmarked it. :)

  We users and me (freak ;)) appreciate good solutions.

  THX dude

• Specification of the RAM for Qosmio G20-110

  What spec ram do need me for a Qosmio G20-110?

  Your Qosmio can be upgraded to 2 GB upwards and you can use follow Rams:
  DDR2 400/533 MHz 512 MB (PA3412U - 1 M 51)
  DDR2 400/533 MHz 1 GB (PA3411U-1M1G)

  Good bye

• Connect a printer to the G20-110

  Hello

  Someoen can tell me how to connect a printer port parallel to the G20-110. It doesn't seem to be a connection to the rear port. There is a small blue card (I think it's 9-pin) but I was wondering if I could get a converter/adapter for this?

  Hello

  In my opinion, you should try the PCMCIA connection--> parallel port
  I found a PCMCIA card that should work properly.

  http://sewelldirect.com/ParallelPCMCIACard.asp