HP Mini 110 - no sound after replacing hard drive and install XP

Similar Questions

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Satellite L350 - Crackle sound after replacing HARD drive

  I recently had to replace the hard drive on my Satellite L350.
  Since then, the sound was crackling.

  I downloaded the top so far, pilots, was deleted and reinstalled the crackles still pilot.
  Any other pointers?

  Thank you. Dawn

  Hello

  Have you installed the OS of the window using the Toshiba Recovery disk or have you installed a clean Windows operating system using Microsoft disk?

  I advise to use the Toshiba Recovery disk to install the operating system once more.
  In addition, the sound chip is Realtek so I think you also need to choose the audio driver from the Realtek page.
  Here you will always find the most recent driver for the chip.

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• replacement hard drive and using recovery discs made by myself.

  HPdv6 mobile 2119tx. After replacing hard drive and loading the recovery discs (which I did) successfully, now it reboot something messages cannot locate the disc or load bootable disc (sorry, don't remember the exact wording, but back to the beginning). Could this be because I replaced a 650 GB drive with a 500 GB drive.

  Hello:

  Normally you cannot use recovery on a smaller hard disks.

  But you should be able to boot from the first disc of recovery at least and see what happens.

  To do this, you must have the first disc in your dvd player.

  Restart the PC and at the beginning of your homescreen HP, tap key ESC then choose one time start in the menu.  Since then, select the DVD drive and continue.

  If the ESC key method does not work, press the F9 key instead.

  It depends on the type of BIOS in your PC (normally according to his age) which key you need to type.

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• Bought a new hard drive and installed Windows 7. I then installed the old hard drive XP in a different machine and now I am told to reactivate Windows XP.

  Bought a new hard drive and installed win 7 to him to replace my old hd in xp. I then installed the old hd in xp to replace a system running under win2k, but I was prompted to save it. can I use the old license key that accompanies the xp or should I get a new license?

  original title: Win2K to XP

  Registration and "Activation" are two different things, registration is not required, the activation is and if the road that has XP on it done from another computer and a "Retail" version, then you will need to activate by phone using your existing product key.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I bought the copy of the creative cloud 5 years ago hard drive and installed it on my old computer. When I got a new computer I saved my applications on an external drive, and then when I tried to put them on my new computer none of them would start.

  I bought the copy of the creative cloud 5 years ago hard drive and installed it on my old computer. When I got a new computer I saved my applications on an external drive, and then when I tried to put them on my new computer none of them would start. What can I do to fix this?

  Adobe applications cannot be copied from one machine to the other, they must be installed using installation files.  Remove everything you put on the machine and use the CC cleanup tool after that.  Acquire the installer to the desktop application, then get the applications through which.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• I have an XP machine (not); formatted the hard drive and installed Fedora instead. However, I would like to go back to XP now.

  I have an XP machine (not); formatted the hard drive and installed Fedora instead. However, I would like to go back to XP now. I have the product key, but really am struggling to install XP. Any ideas?

  original title: Reinstall XP on Fedora

  See if this can help, its for Windows 7 b ut can work for XP (worth a try).

  Windows 7 USB/DVD download tool:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
  Also: http://www.elmajdal.net/Win7/Using_The_Windows_7_USB_DVD_Download_Tool.aspx

  J W Stuart: http://www.pagestart.com

• Of hard drive and installed new drive but Code failure not accepted. Original install was XP with Vista update.

  Of hard drive and installed new drive but Code failure not accepted.  Original install was XP with Vista update.  What do I need to install the xp before installing vista?

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Also:
  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Satellite U940 - Random BSOD after replacing HARD drive

  Good day ladies and gentlemen!

  I was wondering if I can win some lights here - as I google myself in a bunch of flange on the issue, I have!

  I am a famous computer technician (modest too) and more recently, a client of mine introduced me to a ultrabook Satellite U940 - lovingly with the SSD / HDD Raid 0 configuration running our beloved Windows 8.

  All things according to their entire course - Hitachi hard drive failed (as google tells me is to be expected).

  So, I replace the hard drive by a great little number Western Digital, cloned from Hitachi, sector by sector, and after a significant cajoling with bcdedit and bootrec amount, I could so he could begin our good liked Windows 8.

  However, since then, I have random BSOD, cold boots failed and all sorts of errors.

  I ran all the regular patches - SFC/scannow, chkdsk/r, Windows 8 repair facilities, etc., but it is still volatile jolly.

  Things seem not to be as they were with this Satellite little ol '-before any repair, the peripheral device manager showed two "RAID 0' in the category of hard drives, and since then it shows the individual SSD and the WD HARD drive."

  I've updated the driver for the Intel Rapid Storage at latest on the Toshiba site, but nothing helps - alas!
  The weird part is that if I do a reboot on this little beauty, she starts without any problems, but a start cold after a power off is a completely different question - dummy - spit crashing, dumping, in general!

  If there is a troubleshooting there champion who can destroy my help in this situation, I'd be very impressed and never have if they could provide assistance in this regard.

  Unfortunately Microsoft - are we are all end by using these products of ever-so-pretty Appl?

  Hello

  I read in some discussions here in this forum only after replacing the disk SSD or HARD drive, the RAID configuration is lost and must be rebuilt on a device Windows 8.

  But this can be done very easily, and this can be corrected by an authorized Toshiba because this procedure requires special tools and utilities.

  Unfortunately, it seems to me that you will need to contact the ASP in your country to get this problem resolved :(

• eMac stops almost immediately when starting after replacing HARD drive

  Hey all!

  I need to explain a bit for this one, so please bear with me. Thank you.

  Long story short, I've had a few eMacs for quite a while now and I recently found a use for them. I created a (it is running 10.4 with 1 GB of RAM and a > G4 processor at 1 GHz, can't remember) and used it for a while before randomly power loss and refused to stay on for more than a few minutes. I tried to replace the PMU battery with one of the other Mac and pressing the reset button, which leads to stop showing signs of life whatsoever (even after the replacement of the original battery).

  Thinking I had it bricked, I got out one of the other Mac with a plan to give the disk of death. This new Mac running 10.5, perfect with another > G4 processor at 1 GHz (but only 768 MB of RAM this time). The only quirk I noticed is the TRC took abnormally long to warm up, black time with only red but gradually more luminous and no longer red colors of departure. It was about normal 5 minutes after that OSX end of initialization. In any case, I went to swap out hard drives and put everything to the top, to see that yet again, this new Mac does not work!

  If it has been awhile since the last attempt to start the CRT will do its usual "bong" noise before machine clicks (sorta like a relay of power off) and nothing else happens. If I try again, the CRT is silent (no doubt he is already warm from the last attempt to start?) and you can hear two clicks - one that looks like something to turn it on, then turn it off even on front. These clicks are different lengths apart - usually, this is only a few seconds, but sometimes longer. There was a few times where the fans have started between clicks and I've even heard the startup chime on an attempt (which got me excited - but no, it clicked and distributed repressed). The CRT does not seem to do anything other than bonging from time to time (but it can turn on - I can't say because of the problem of the warm-up that I mentioned earlier).

  I would really like to be able to resurrect this old Mac once again - I have the vague feeling that I broke it when replacing the HARD drive. I'm pretty sure that I have not forgotten all the internal cables, and I tried not to touch anything other than the HARD drive and the enclosure of the logic board (ended up having to remove the blower housing too, however). Two Macs are model A1002 and both have serial numbers in the YM412xxxxxx - YM520xxxxxx range (eligible for repair program?). I don't know if they were actually taken repair back in the day.

  In any case, I hope you guys can help out me! Thanks in advance!

  (P.S the first eMac is well beyond repair. I have also a third one - it is better to go by replacing the HARD drive again? It is worth noting that the PMU battery has been sitting on my desk for a while now. "It was probably flat anyway).

  The HARD drive would be the problem? It seems that it is.

  See if you can just unplug the data cable from HARD drive and try to hold down the alt or option to the startup/power.

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.