QWidget analog::geometry()

Similar Questions

• 10 IOS removed the app clock analog clock

  The analog clock has been removed as a display option in IOS10 when you look at world clock.  I used this and would like to see that he returned in the future for updates.  There are a lot of nice new features, but the clock is a base which should have not been disabled.

  He went.

  You can send feedback to Apple:

  http://www.Apple.com/feedback

• in the new iso standard 10 analog world clock update?

  How can we change the analog world clock in the new update iso 10? You could do it before, and now I don't see how to change it.

  I only ever remember an analog option on my iPad.

• 10 IOS on iPhone 6, analog clock, how?

  I've just updated to iOS 10 on my iPhone 6 and want the analog clock, what should I do?

  Go to the App Store and download a clock application.

  And here's one with an analog clock: https://itunes.apple.com/us/app/analog-clock-free/id290790938?mt=8

• analog audio cable to digital

  I want to get a small walkman cassette audio 3.5 mm cable into the computer by the USB bus. Am I understanding that the required cable must be 'converted' because one end is analog and digital on the other? I intend to cassettes music download the Garageband application. If Yes, where can I buy such a cable converter, I hope that stereo, perhaps with nickel or gold contacts?

  You need an analog-to-digital converter for this: for example https://www.amazon.com/HiFiMeDIY-Digital-Analog-Converter-PCM2706/dp/B00CWVDPC0/. Alternatively you can get a simple tape with a USB connector like this player: http://www.tape-2-mac.co.uk/.

• FTTP, NBN phone and analog

  I have NBN FTTP with iiNet and looking to move to an Airport Extreme. My question is, is there a way I can connect an analog phone to EI or should I get a new phone. I need a by 2-3 cordless handsets so I weigh the cost between a converter or a new device. My phone service is via the VOIP application.

  iiNet should give you a wireless modem router... Method NB16VW which includes voip, unless you specifically asked to do not to get.

  The method can still be used ATA plugged in the extreme is my guess.

  Otherwise, you should buy a VOIP phone... ultimately, it's a far superior solution... The gigaset C530IP round $180 and you can buy additional handsets with her. Quite expensive but big cut above the average.

  There are a few old gigaset nine eBay for $75 if you want a good option. Research of F470.

• How can I connect an Apple TV to an analog TV with 2 RCA Sockets?

  I have an analog TV with 2 jacks RCA - one for audio and one for video. Can I connect to an Apple TV box? Thank you.

  Maybe you should try to buy this part, just connect the red plug if your TV does not have one. Here is the link: B01F77KXC0/ref = sr_1_3 https://www.amazon.com/VAlinks-Composite-Transmitter-CONVERSION-Transmission/dp/? ie = UTF8 & qid = 146898...

• analog clock

  I was in the process of switching to a MacBook pro-2016 Windows 10 and I think a number of things that I miss. For example, an analog clock. Apparently is not part of the operating system. I see there is for the purchase, but nothing of shareware that fits what I'm looking for, is there a solution?

  The learning curve has improved, but the disappointment continues to grow.

  You can choose one or more analog clocks to the dashboard.

• I want to download DVDs, I made movies on analog tapes, my iMac for purposes of editing and archiving. None of the files are protected. How can I accomplish this?

  I created more than 75 DVD by copying the 30 years of personally owned and created the analog video tapes that have been recorded on my camcorder.  Now, I want to download these DVD on my MAC for editing and archiving of files application. I can't understand how better to achieve this?

  One of the possibilities-> http://www.roxio.com/enu/products/easy-vhs-to-dvd/mac/overview.html?rTrack=b_eas yvhsmac

• iMac with Thunderbolt - how to get the old analog inputs

  I hang up my old Mac Pro in 2005.  I used it to record video cameras and mainly music best of my plate rotating and stereo system - vinyl and CD disks via s-video and RCA cables and Firewire for Mac Pro.

  The iMac 27 "new is primary Thunderbolt and I can't find a Thunderbolt conversion box so I can enter my analog input RCA and S-video signals.  No indication on the Thunderbolt converters 'both ways' I can't exit analog in the iMAC, then the iMac as well?

  They certainly run Final Cut Pro X on the iMAC, then how people get their old media and music in the machine?

  I'm about to talk to the local Apple store, but the chances of finding someone who knows what they are talking about with the iMac, Thunderbolt and analog input is going to be a stretch.

  Al Donn

  You can probably use a converter DV firewire as a Canopus ADVC 110 http://www.bhphotovideo.com/bnh/controller/home?O= & sku = 349146 & gclid = CLSF0_qUnswC FQ8vaQod9VkFFw & is = REG & ap = y & m = Y & c3api = 187... and then an adapter firewire-crush.

• FIRST HP: Geometry commands Tests

  Hello

  In the application, we function TEST of GEOMETRY. It is a unique but very necessary function. Let me give you an example. I draw the GD rectangle, rectangle (GA, GB, GC). Then, in the geometry view digital and I write is_parallelogram (GD). Then back to the Plot of the geometry window and enter for a vertex to change its dimensions (length and width). Nevertheless, always on the screen I have a rectangle. But on the screen TEST shows strange things. Once the is_parallelogram (GD): 1 then is_parallelogram (GD): 3. even for other geometric figures:
  Rhombus, square, triangle, isosceles triangle.
  Ill work TEST function in the construction of their own this building, where there are forms of a rectangle, square, diamond or different triangles. When we change the dynamic side of these figures we get messages wrong: is_parallelogram, is_ isosceles, equilateral is_.
  I use a lot of GEOMETRY and these false messages on the screen annoyed me. It works great the TEST function for the parallelogram of figures. It shows always, at any time, without any error is_parallelogram (GD): 1. it is similar to is_collinear (). OK, but not perfectly with the command is_parallel and is_perpendicular. It must also be corrected to make it without reservation. I have another question. Is the is_element () command is the mathematical functions only or for different geometric figures and geometric constructions.

  Best regards!

  Johnder

  Hello

  I'm not sure I understand your question exacly (English is not my native language), but I'll try to bring some light it...

  The is_parallelogram function can return the numbers 0, 1, 2, 3 or 4 to indicate: no parallelogram, parallelogram, Rhombus, rectangle and square.

  Go back 0 or 1 that you complain?

  In the application of geometry tests are performed on the values of the coordinates of the object floating points. Unfortunately, this leads to loss of precision which in turn throw off-label test (the value of floating points being the accupressure, the figure is only approximately parallel or rectangle). Perhaps what you are experiencing.

  If this is the case, an easy solution is to change the setting of case epsilon.

  To compare 2 numbers, system of computer algebra (which is the calculation behind the application of geometry engine), subtract them and test if the result is smaller (in absolute value) to epsilon. Change the default 1e-12 1e-10 Epsilon (in CASE settings, page 2: update, Page Down).

  This fix works because, to test if 2 lines are parallel, the CASE will calcualte their relative angle and then compare that angle with 0 (or 90 to perpendicular). Which will make the more lenient number comparison will make the geometry to test also more linient.

  I hope this helps.

  Kind regards

  Cyrille

• FIRST HP: GEOMETRY

  Why the GEOMETRY application draws derived for example. The function x ^ 2-x ^ 3, sine, cosine and does not scratch the functions derived as the tangent, logx, LNX. Draw an incomplete derivative of graph of y = 1 / x. Why is it like that.

  Hi!, @Johnder:

  Welcome to Forum!

  Can you better write your equation and question?

• Driver problem Tuner TV PCI DVB-T/analog on Qosmio G30-126 & Win7 64 bit

  Hi all!

  I have red all messages on problem Toshiba PCI TV DVB-T/Analog hybrid Tuner on Toshiba Qosmio G30-126 and Windows 7 64-bit (x 64).
  Unfortunately, I did not find solution in messages.

  I have computers portable two Toshiba, former a Toshiba Qosmio G30-126 & new a Toshiba Qosmio G50 - 12K.
  On the new there is no problem with drivers and the new Windows 7.

  On the old but there are 2 problems. We're with the drivers for the buttons that do not exist. 2nd problem and more iritating is problem driver Toshiba PCI TV DVB-T/Analog hybrid Tuner (x 64) (code 39).

  Now, I know that here probobly is no expert Toshiba ppl, but if there is any1 who has solved this problem, pls explain below how you did... at least until the Toshiba decide to new drivers relese in the near future.

  Kind regards.

  Hey mate

  The problem is that there is no Win 7 64 bit drivers made the Qosmio G30 series.
  You have to collect the drivers with your own hands!

  Here you will find a nice display:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49400

  You can test the Tuner driver for the Qosmio G45 - xxx series that seems to be compatible with the G30.

  See you soon

• SHOWBIZ DVD 2 analog video capture on my E10

  ShowBiz DVD 2 analog video capture on my E10.

  Stu

  Eric, I really don t understand you. First Movie Maker is part of the Microsoft software and you get it with Windows XP. What producer can do is to test it with own product. I'm sure you know that Movie Maker is developed for editing movies and not for recording of TV programs. WinDVD creator is also very good for editing movies.

  Second, you cannot say that you cannot save your favorite TV channel. This function is also integrated into WMC. If you don't like it, or you are not satisfied, you must look for the best solution.

  The same thing has been with me. I was not satisfied with the program to burn and I bought a new one with more options.

  Good bye

• Equium A60-191: number of Modem - only an analog phone lines are supported

  My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

  The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

  "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

  My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

  I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

  Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

  I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

  Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

  I would be very grateful if someone could help it. I'm out of ideas.

  Thank you very much.

  Hello

  You are right, the modem supports the Modem Agere chip.
  You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

  I think you should start the diagnostic tool test and check if the Modem has no malfunction.
  Additional you must remove the connection in the region Select utility and after restarting again create a new.

  I also found useful Microsoft article on troubleshooting network and dial-up connections.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  and you'll find info on the error of DUNS 680:
  http://www.Modemsite.com/56k/duns680.asp
  http://PHP.iupui.edu/~aamjohns/trouble.html#no tone