analog audio cable to digital

Similar Questions

• analog audio output and digital optical

  I just bought a 500-214 with IDT High Def Audio CODEC Pavilion / DTS Sound +.

  Is it possible to get opitcal of audio output digital and analog (speakers/headphones) at the same time?  Stereo amp needs access both to the multizone/source function.  I can manually choose one or the other before the reading - it is clumsy that when audio of of active switching devices will turn off, but a passage to not always light up.  But I really need both active simultaneously for amp work properly.  I also found jack rear speaker to be more stubborn while headphones jack front of switch.

  Hi zombi1,

  Welcome to the HP Forums!

  I did some research on whether or not we can use the analog or digital audio output at the same time, and it is unfortunately not possible.

  Thanks for posting and happy Earth Day!

• Digital input to Toshiba 46TL-> no analog audio output to amplifier

  Hi all

  When I connect a video source (e.g. computer laptop via DLNA) to my 46TL, output TV audio analog (red/white taken connected to an amplifier) does not work.

  It does, however, watching television.

  Is it possible to configure the TV to read the audio data from digital input (HDMI/DLNA) to the analog output?

  Thank you for the help

  Not quite what series of TLxxx you have, but for example the TL938 supports a digital (optical) audio output port that provides a digital audio signal.
  Why n t connect the amplifier to the TV using this Jack?

  Connectors for component video / audio to the rear of the TV are the ports of ENTRY and not the OUTPUT ports. So, you can send an audio signal to the TV and not the amplifier output.

• Capture Analog Audio Cassette on Qosmio player

  G163 manual indicates that the SVHS-IN should be used to capture the audio analogue. But same Belkin do not sell a SVHS cable with two RCA plugs / mini-prises on the other end. Or is it safe to the output of a speaker port extension cassette player for entry into the microphone port.

  But which could overload the circuits if the volume is too high. I have the audacity to make the real analog - digital conversion and capture. I am amazed that this a portable Hi-Spec (and expensive) does not come with something as simple as an analog audio line-in port.

  Thank you very much.

  1. you get easily no matter what audio through audio red and white composite input(red-white-yell0w) provided and yellow video.

  2. video (not SVHS) is for video only (image), it cannot carry audio!

  3.I have used windvd creator and the above to convert ALL my VHS and SVHS tapes on DVD with audio and audio video and even dubbed through the input mic for more than a year now (best video with SVIDEO and you must still connect to an audio input to the unit)
  Qosmio comes with a variety of composite video input s video and the split left and right audio inpur with minijack adapter (marked triple minijack)

  Enjoy

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Airport Express - no internet if audio cable is connected

  Hello

  I have an Airport Express for several years already and it worked perfectly fine for me until today.

  I didn't know that the internet connection has stopped working. After trying different things, I realized that the internet connection works when I connect the audio cable to the the Airport Express - airport service program in the internet sign suddenly gets Orange and green not as soon as I connect the audio cable to use for AirPlay. When I disconnect the audio cable again, it works again.

  Any ideas of what this could be?

  In this way, that I can't use Airplay longer.

  Airport Express: Version 7.6.7.

  I tried the update of the AXE, but this did not help.

  Thanks to everyone for your ideas!

  Best regards

  Georg

  Is the Terminal AirPort Express the only router in the current configuration of your network? What is the brand and model of the Internet with a modem or gateway that you have the Express directly connected by Ethernet?

• Office PC Audio Cable male-male

  Well, I'm sure it will be simple for you all the computer wizards out there.  But I am only one person of basic computer level.  So, let's go... Desktop PC.  Looking for the old standard male to male Cable Audio TRS mini Plug.  Black cable with plugs of green clear.  I searched Google for it without any result.  I can find pictures, but no place to buy.  Here is a picture of what I'm talking about...

  Hello:

  This is a cable... is not green ends, but it's the only color coded so people know it as the port to plug the cable in.

  http://www.Amazon.com/cables-unlimited-AUD-1100-06-stereo-cable/DP/B000SE6IV8/ref=sr_1_1?ie=UTF8&QID=1447165860&SR=8-1&keywords=male-to-male+audio+cable

• My multimedia audio cable will not operate its

  I used to be able to connect a multimedia audio cable in my computer, in the front on the right hand, (Dell Inspiron 530) in my music (on the audio jack) centre. By doing this, I could play the music from your computer through the speakers of my music centre. I had problems with my phone line and I brought someone to connect wirelesss for my computer... This versatility put a camera in front of the computer almost where I plug the cable multimedia audio cable into the computer. At the same time, my operating system has been updated to Windows 7. When I try to use multimedia cable, there is no sound through the connection on my music centre. Please tell us how I can go back to where the music is played through my music centre.

  Run the audio Troubleshooter to see if it detects and fixes something. It may not, but it won't take long to try - http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter

  If this does not help, see what devices are listed by default - and reading http://www.7tutorials.com/how-change-default-playback-recording-audio-device

  (Sorry if I misunderstood your problem).

• His crackling/lag all the seconds when you use Virtual Audio Cable / Line in on my HDTV

  I recently discovered that I can use Virtual Audio Cable to play a sound through linein windows, so able to use the MilkDrop visualizer on my HD TV connected via hdmi on my pc. But the audio crackles/lag every few seconds. I had to work yesterday, I don't know if she was then, but I don't think that this was the case. What would be the cause of this/how can it be fixed?

  Hey Kevin,

  You must contact the support of virtual Audio cable for better assistance.

  http://software.muzychenko.NET/Eng/VAC.htm#support

  Good day!

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• Analog audio CD with .cda (?) files

  Cannot change devices in Windows Media Player Digital to analog for listening / copy the CD on computer. Help!

  Hi evaldimiro,

  Navigate to the CD drive, the Explorer, and then double-click a .cda ( CD Audio Track) file to read.

  Are you able to read the file?

  I suggest you try the following steps:

  1. open default programs by clicking the Start button, click default programs.

  2. in the absence of programs, select associate any type of file or Protocol with a program

  3 refine the .cda file to open with windows media player

  Check whether the problem is resolved.

  Note: You can not read the CD Audio track (.cda) file, if you copy a .cda from the CD to your hard drive.

  For more information, see the link below

  Information about the media file types supported by Windows Media Player

  http://support.Microsoft.com/kb/316992

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• audio output: optical digital output port (no sound!) macbook pro retina 15 mid 2015

  My new recently Mbpr 15 inch has suddenly lost its sound, I went through the process of the toothpick etc but nothing. It worked perfectly fine earlier today, but I put in a mini jack into the headphone port and after to achieve 30 minutes later and taking the cable to THE that I had not his, then I had the red light coming out of the helmet but now its does not come in red and in the sound settings in system preferences its impasse on "optical digital output Port.

  I now have to wait a week to wait until I can get seen at my apple store closet, I coming projects upward and in the middle of deadline and really using this Mbp to work, I literally only had a TI surly less than two months, I shouldn't have any problems. So if anyone knows anything I would appreciate it a lot! I need help to get this resolution as soon as possible! the last post I saw this was in 2006-2012 no new thread on this recently!

  Thank you!

  Jasonwaterz wrote:

  I then had the red light coming out of the helmet but now its does not come in red and in the sound settings in system preferences its impasse on "optical digital output Port.

  Try resetting the NVRAM/PRAM http://support.apple.com/kb/ht1379 memory

• Mac Pro (early 2009) Analog Audio Line-in for Airplay?

  I have a stereo receiver and the turntable connected to my Mac via the analog line in port. The incoming audio signal is visible in the input Audio Pref Pane.

  Is it possible to listen to this audio on Mac?

  Is there a way that audio to device Airplay (specifically an Apple TV)?

  Thank you!

  Too bad. Rogue Amoeba to the rescue Airfoil. (A correctly worded Google search has been the key)

• Audio stuck on Digital Out when Windows starts

  I just finished to install 10 Windows on my Macbook Pro retina mid-2015, and whenever I start Windows, audio is stuck on the digital output. I tried to remove Realtek and reinstall it, but no go.

  You can perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and test?

• No sound from the TV through BDV T57 - audio cable

  I can't get my sound of television through the BDV T57. The TV is a Panasonic. I have audio in TV BDV audio output cables.

  Any thoughts?

  Thank you

  Henry

  Glad to see that you have solved the problem yourself - let us know if you have any other questions, and we will be happy to help you.