R7500 use of bandwidth by the device and the application does not appear anything.
Hi, I am currently using a v1 R7500 and since Thursday, I have a problem with the use of bandwidth per device with 0Mbps of traffic for each device.
When I inspect the traffic on the page with chrome I get an infinite number of error at the rate of 1/s.
Does anyone know a fix?
Factory reset and reflash the firmware
Tags: Netgear
Similar Questions
-
The "Devices and printers" folder does not appear anything-
I can't open the file "Devices and printers" to show my printers. The green bar above seems to be looking for the devices, but eventually slows and then stops apparently slowed to a standstill.
How can I fix this? It is a 6 month old laptop with Windows 7 and my printers operate through programs installed - it's just the system that don't recognize.
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
You have many devices connected to your computer? You can try unplugging everything that you do not use. Maybe the driver for one of them must be updated.
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
the iTunes Setup program finishes, but the application does not appear
For starters, I'm on Windows, but it seems that the system is not the problem because it's happened before, with my Macbook Air.
I download iTunes on Apple's site and Setup will run as usual and finishes. But iTunes never displayed in Program Files, the destination he was supposed to have downloaded. I opened the Task Manager and tried to manually run the program yourself by using 'itunes.exe', but he writes that the application does not exist.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
I installed Visio, but the application does not appear in my programs folder.
the exe is installled but I can't find the Viewer
the visio program does not appear in my program folder. the download worked successfully, but when I double click on visioviewere.exe, I never see the instructions to complete the installationHello
1. what version of Internet Explorer is installed on the computer?
2 are you able to install other applications without any problem?
3 did you last modified the software on the computer?
Method 1:
I suggest you try to install the application as an administrator. Right-click on the .exe file and , click Run as administrator.
If this does not help, go to the method 2:
Method 2:
You can run the FIXIT and.
Cannot open. Files EXE in Windows 7 or Windows Vista
http://support.Microsoft.com/kb/2688326
You can also try the manual steps but remember to back up the registry before do you.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Method 3:
You can also run the FIXIT and check if it helps.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
See also:
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
Hope this helps and keep us posted.
-
Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).
The phone is new (5 days). It's a wedding?
If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.
Restore your device from an iCloud or iTunes backup - Apple Support
Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support
-
Can you please tell me why?
With my Adobe Acrobat Pro, when I click on save as PDF... PDF reader enable adding text in the Documents does not appear.
Thank you
Elina Mackay
Adobe change Acrobat a lot between releases. Make sure you follow instructions to the same version you have.
If this looks OK, let us know the exact version you have (help > about Acrobat Pro).
-
Remote control does not work, and the load does not appear on Apple TV
Hello
I just returned from vacation and my remote seems has stopped working. Naturally, my first assumption was that the charge was simply exhausted.
Apparently that was the case. He seems to have just died.
I did pay for more than two hours and it still does not appear under devices Apple TV.
My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.
If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.
Any suggestions on how to fix this?
A reset is complete? Restart... no change.
Thank you
Bob
- Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
- If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
- If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
- If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.
-
I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.
Manually delete the cache of the preview of your user folder.
Mylenium
-
!
I bought indesign cc 15 and I want to download the version previous (2014), but the option does not appear in my window. Can you help me?
!
Download previous versions of Adobe Creative applications-
http://helpx.Adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. HTML
-
pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...
Wow!
So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.
Follow the procedure below:
- Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
- Make sure that there is no entry of Adobe on the inside.
- Then copy and paste the Hosts file in folder etc.
- We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
- When you are prompted, the authentication by password Mac,
- Be sure to select the option Replace ...
- Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
- In the affirmative. launch creative cloud application and load the list of Apps and check.
-
My watermark came before I did the recent update on CC 2015, always when I would export to PhotoShelter. Now, the watermark does not appear. I asked PhotoShelter for help and they said they have heard about other problems. How can I solve this? Nothing has changed on my computer. Thank you.
Sharon Cameron
Hi sharonc,
Have you tried to reinstall the plugin Photoshelter for Lightroom CC newer version 2015.
See the below for the upgrade to the latest Version
Let us know if that helps.
Kind regards
~ Mohit
-
I can't use the patch command. The icon does not appear on th comand bar.
I can't use the patch command. The icon does not appear on the comand th bar
Hello!
Compared to other versions, in CS6 the patch tool is in a different place:
If this does not help, what version of Photoshop are you using?
Please post back with other questions.
Janelle
-
Speed dial installs, but the icon does not appear
I used speed dial for a long time, both on my desktop and my laptop, and I really like it. Recently, I got a new office and installed the latest version of Firefox. Everything seems to be working well, but when I try to add Speed Dial, it appears to install correctly, but the icon does not appear in the menu bar. I tried several times and each time I like Speed Dial will be installed after I restarted Firefox. However, by clicking on the button will restart FF, but the icon never appears! What goes wrong, and how can I get Speed Dial to work for me, as it has always done?
Dial manual > getting started - http://speeddial.uworks.net/gettingstarted.html (see paragraph beginning "when this extension is installed... »)
- This is the same as the other buttons on the toolbar add - see: https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars#w_how-do-i-customize-or-rearrange-toolbar-items
Complete manual of dial - http://speeddial.uworks.net/manual.html
-
BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.
Changing the iTunes media folder location setting affects only where new additions to your library will be stored. To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:
The hold button SHIFT DOWN when you start iTunes and when you see this message:
Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.
For more information, see user turingtest2 on make a library of portable split. You must also acquire a 2nd external drive and allows create and maintain a backup your library.
-
ATL-TAB within the APPLICATION does not work
I'm a convert from windows and love the mac but Alt - Tab within the application does not work - very annoying. I often have multiple windows in the same application, and if the only way to go is to use 4 fingers Mission control, it's terrible because Mission control lists all windows in a small size and pain to know that you want to go. While with alt - tab, I can quickly cycle or just go to the last which is often I want to go to.
It is one of the major issues Mac usability for me.
Any tips? or addons?
Thank you.
Cmd -'
Curiously, this document has the wrong shortcut. Keyboard shortcuts in Mac - Apple Support
They have to move to the next application window is to go to the previous application window.
Maybe you are looking for
-
Photosmart 7520: ePrint email address
I recently bought a Photosmart 7520 refrubished. He already had an email ePrint address in Setup. This is different from the email ePrint I had the installer with my Photosmart 7520 precedent and is still shown in my account when I connect to the ePr
-
How can I load Variables into a file?
Hello I'm looking for ways to automatically load variable FileGlobals used in all sequences of my "Test sequence: Test sequence | | -Sequence 1 | -Sequence 2 | -- ... | -Sequence N in order to only change the file .txt, .csv (or .xls...). Thank you.
-
Windows delayed write failed - Windows 2003
Hi all Recently, my PC has met an unexpected stop down. When I restarted it, it is very slow, and a message appears saying: «Failed to write delayed Windows...» "Windows was unable to save all the data. Can you please help me in fixing this issue...?
-
New Windows 7 install. Set up the login admin PW. Whenever I have connection, the first test says wrong user or PW. The next test (no change (caps lock, etc.) this works.) Weird! Any ideas?* original title - transient Windows 7 lockout *.
-
Hi allcreate table sample_table (cross_reference varchar2 (10), select_flag varchar2 (10));insert into sample_table values (10123, NULL);SELECT cross_referenceOF sample_tableWHERE cross_reference =: v_refence- AND select_flag = 'Y '.AND nvl (select_f