R900 network configuration

Similar Questions

• Every few minutes, the message "the network seems to be down. Is the network configured correctly? »

  When you play Pandora, every few minutes, the message "the network seems to be down. Is the network configured correctly? "is displayed. I click OK and Pandora continues. Network connection diagnostic report no problem. I have the BDP-S390 and a cable network.

  Hello Thomas,.

  Also, try using a different Ethernet cable or try to connect the player to another router's Ethernet port. He may be a problem with the Ethernet cable taking Ethernet to the router/player.

  Make sure that the Internet speed is 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  If my post answered your question, please mark it as an "accepted Solution".

• HP Envy 5540: Printer Hp Envy 5540 randomly printed the Network Configuration Page

  Hello!

  I bought this printer about a month ago. Set up the connection to the printer wireless with my wifi, and my understanding is that the printer is protected like my wifi and use the same password in order to print something. I kept my printer connected and 'standby mode' since I put in place. The night last at about 23:00 when I was in bed, the printer turned on randomly and printed a "wireless network configuration page" that has had a lot of information, including the IP address and listing my name wifi as well as the names of my neighbors wifi in the surrounding apartments.

  I'm trying to understand why this printed, because I certainly did not do. Anyone have access to my wifi, or has someone may simply try to print something and selected my printer as it should appear on the "list available connections on the computer of anyone, given that the printer is turned on? How could they print this sheet of network configuration if my printer is password protected?

  I'm mostly concerned about someone who has access to my internet if they could print this page somehow, but maybe it happened just when they tried to connect to it, and it did not work while trying to fix MY printer?

  I would appreciate any idea on the issue.

  Thank you!

  Hi @printerprob5540,

  Welcome to the HP Forums!

  I saw your post on how your HP Envy 5540 randomly print a Network Configuration Page. I'm happy to help with this problem!

  I find it very strange considering the only way to print the Network Configuration Page, AFAIK, is with the following steps:

  • Make sure that there are size A4 or US Letter, unused, plain paper in the feeder.
  • On the printer Panel, drag the screen to the left and then press Setup.
  • Touch tools.
  • Drag upward on the screen and then tap Network Configuration report.
  • A Network Configuration Page prints up to three pages of information.
  Figure: Example of a Network Configuration Page

• My network configuration shows a computer belonging to others. How can I remove it?

  my network configuration shows a computer belonging to others.  How can I remove it?

  original title: grafting the internet

  Hi Maureen,

  That your router has security enabled protection?  My guess is it doesn't and it's the way that person uses your wireless connection (like someone to visit with a laptop you could if you configure).

  As a general rule, access to the router is by typing http://192.168.1.1 (or whatever your gateway address) in the address bar of your browser and you will be able to bring up the router configuration settings.  He'll probably want a username and password.  Sorry, I can't help you there because I have no idea what it could be.  Try admin/admin or admin/password or administrator/administrator or administrator/password or admin and no password or admin and no password (the classic default settings).  Your ISP or service of technical assistance of the manufacturer of the router may be able to help put this in place.  After that, how configure security entirely depends on the ISP, the router, the type of operating system you have, the type of internet connection you have and a number of other factors that I have no way to know, even if you told me that information.

  In fact, to see if this applies even, go to the Network Center and sharing, and click on manage wireless connections.  Select and double click on your network.  Click the Security tab and see if it is configured with the entries in the drop boxes first two points in the key with a password applies.  If it does not exist, then there is no security on your wireless router.  If there is, then your network is secure without doubt.

  When you see the active connection, click on start / all programs / accessories / and double click on Control Panel.  Type IPCONFIG/all and see if you can identify this other connection of the computer.  It should provide more information about it for the purpose of identification.

  If your router is not secure, you must fix and this should solve the problem.  If your router is secure, you should change the password/key of the router to see if that solves the problem (and then you will need to change the key to all your wireless computers and devices to match the new).  If it still does not work, then come back and we will come with some other ideas (assuming that the manufacturer of access provider or router cannot help you with this).

  I hope this helps.

  Good luck!

• The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters

  Hello

  My operating system is window XP and my D-link wifi I am connect the wifi type password

  I get the error message...

  (The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters)

  Another wifi connect operating system works very well for example... Vista or window 7 only problem window XP

  Shafique.Cheena

  Hello

  Glad to know that the question that you were before face is now resolved. For the question you're faing while changing the name of the computer to the domain, I would say that you check out the link and follow the steps.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  http://support.Microsoft.com/kb/295017

  If the problem persists, post the question in the Technet forum that would be better suited. Check out the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Try to connect to the router but I get the error: "the network password must be 40 bits or 104 bits according to your network configuration."

  Hi Ive got three computers in the home two of them are not connected to my TALKTALK router no problem, but the third connect once but its gives me "the network password must be 40 bits or 104 bits according to your network configuration. This can be entered as 5 or 13 characters ascil or 26 hexadecimal characters. "error please help

  for any other computer my password work but when I try the same password for this one gives me the message above.

  Thank you all

  original title: 40-bit or 104-bit error

  Maybe you need this patch: http://www.microsoft.com/download/en/details.aspx?id=1974

  What version of Windows using this computer and what type of encryption is the router?

• When creating an AD HOC network, I get this error "the network password must be 40 bits or bit 140 according to your network configuration".

  created an ad hoc network on Windows 7 Home premium machine.  When the password was presented by the XP machine at home, the message: "the network password must be 40 bits or bit 140 according to your network configuration.  This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. Do not know how to proceed.  Advice requested

  MNewsome salvation,

  I suggest that you download and install the latest drivers for the network adapter on the computer to the adapter manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the link below and download the document to learn more about the Ad hoc network.

  Special Internet sharing with Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13190

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• When I try to connect to my Netgear router I get an error that "the network password needs to be 40bits or 104bits depending on your network configuration."

  Hi, I have an Inspiron 6000 labtop Yes it's old but it works :). I also have a Netgear wireless router and I have passwords on my wireless connections and I know of course that the password. When I try to connect to the router wirelessly on what he asks the password as usuall and I type it, and then click Enter. After that, a message appears saying "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. "How can I solve this? Help, please!

  original title: wireless network password problem!

  Hello

  Connect the computer to the router with a wire.

  Connect to the menus and change encryption and password length in the privileges of guide.

  Connection with wire to the router and working with the menu should be explained in the manual of the router.

• Network Configuration problem

  Hello:

  Since last week, when I click on an icon, for example, the Page Home/Windows 7 does not come on the screen.  Instead, warning to appear at the top of the screen saying... Problem with Internet connection or Network Configuration problem.  After 5 minutes, or later, however, the screen came, but it is very slow to open web pages.

  This problem occurs most often during the night, however for the last two days, sometimes also during the day.

  Until this problem started out of blue, wireless connection with Comcast was very smooth-ride,... instantamously the homepage of popping up.

  Hints on this would be greatly appreciated.

  Thank you

  This sounds like a problem with your Comcast service. In the United Kingdom, I would suggest that you run a speed test on your connection speed. You can get no doubt do the same wherever you are. While it could be the quality of your line, the calendar offers it's the volume of traffic from when children arrive home from school until they go to bed.

  You could compare notes with other Comcast customers.

  http://forums.Comcast.NET/

  Hope this helps, Gerry Cornell

• The network password must be 40 bits or 104 bits according to your network configuration.

  I had a hard time to connect one of my netbooks on the internet yesterday from this thread

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/4c2688b6-247C-467a-89dd-a0c164ec4b89/

  on the way to reconnect to the internet. When I followed the steps suggested that PML, I get the message

  "The network password must be 40 bits or 104 bits according to your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. »

  The only thing that's happened before, it was that the battery is dead and went into hibernation. I was wondering if someone could help me with what to do to fix this problem.

  Edit: this is an acer netbook that I'm trying to connect with.

  Edit 2: I found a solution for him in comparison to a second netbook we have. It was the type of connection, he was trying to do and unrelated to the problem that I had.

  Hello

  To make sure wireless encryption needs.

  There are a few types of wireless networks, and the response of PML due to a problem of the OP has the wrong configuration wireless for the network it is on.

  The wrong configuration mentioned in the thread is company 802.1 x, when it is off there is always a need of regular password to connect to a regular safe home wireless network. Which is probably what your wireless network comes with.

  I don't know what you're trying to connect to (or what you're doing), but apparently the connection you are looking at is safe and you must know the password.

  If not, tell us the story in details, so we can try to give you an answer rather guess.

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• EqualLogic group member network configuration error: "management interface should not be on the san subnet.

  Hello

  We currently have new EqualLogic 6100 device with this network configuration:

  Director of the IP - 192.168.0.2 (VLAN1).

  Member network config:
  eth0 - 192.168.0.3 (VLAN1)
  eth1 - 10.10.10.3 (VLAN2)
  eth2 - 10.10.10.4 (VLAN2)
  eth3 - 10.10.10.5 (VLAN2)
  ETH4 - empty

  I would attribute 192.168.0.4 to eth4, but received the error: "management interface should not be on the san subnet.

  I am sure that all interfaces eth has access to the VLAN1 and VLAN2, mean error indicates that eth4 should not access VLAN2 and only access the VLAN1 on the switch?

  Or eth0 should also have access to the VLAN2 only to reconfigure eth0 and eth4?

  Thank you

  > The group eating IP should be in iscsi VLANS?

  Yes!

  Note: If configure you an EQL it will ask an iSCSI port because nothing is more necessary to bring it up. The doest previous EQLs have a dedicated Mgmt Port and later, you can convert the last ethX as a MGMT port. This is the reason why configure you ISCSI at the beginning. (Think of a mixed group of newer and older models, and you get a picture)

  OK... once again it is the one and only member of the Group and there is making the production host connected to the right?

  The change of IP address, to a 3rd. subnet for temporary use.

  -Do not touch eth0-3 and the IP address of the group now

  -Configure the MGMT port and IP address management in the tempr group. Subnet. Use the Config-> Adv. Group-> network MGMT. You can change the MGMT Port of the Member, and the address IP of MGMT

  -For the registration of the configuration, you will lose access. You must place your admin PC in the templ. subnet so

  -Connect to the GroupMgr with temp again. INTELLECTUAL PROPERTY

  -Now you can change the IP address of group 10.10.10..x

  -Now you can change eth0 10.10.10.2

  -At the end, you can change the address IP of the Group MANAGEMENT, as well as the MGMT Port to 192.168.0.x

  -Change the IP address of your admin PC rear

  A failover, you should consider to hang a serial cable the active controller of the EQL. Use 9600,8,1, N with your favorite terminal program (putty.exe on windows). All the steps, you can perform from the command line.

  If this group and the only member not in production, but you can reset the config and restart from the beginning.

  Kind regards

  Joerg

• The network configured GBA 4.2 device report

  I'm trying to shoot the report of all devices in the network configured in ACS. But I'm not able to pull it, can someone let me know how to extract the network devices configured in the device of the ACS.

  If I understand the question, you want to export the AAA clients / network devices. You can get the aaa clients/devices information in excel sheet at the bottom of the steps:

  Go to network setup > Search > maintains the search that is default parameter to search the entire. Press search. There will be a 'Download' option that will appear in the left corner of the search results. Click on save this list.

  This list will include,

  -Name

  -IP address

  -Type

  -Name NDG (if applicable)

  NOTE: this will not contain customer AAA Shared Secret keys have been configured with.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Change the IP address in the user profile of the Network Configuration?

  I added some users on the network configuration in order to change the ip address when they are in the other site, but in Windows 7 it is inviting to enter the user name and password, if a single user, enter the name password it will allow them to change the ip address how to change so that the user is able to change your ip without asking for a password and username?  How can I solve it... Thanks in advance.

  Nerdcat

  Address you internal IP is defined by the router or the ISP based on your configuration.  If you try to change the internal IP address using "static IP" you shouldn't have to enter a user name and password so that it is in configuration and fixed like that.

  You cannot change the external IP provided by your ISP it however.

• Network Configuration operator: link to change speed

  Hello

  in my area of the company, we use laptops Windows 7 Professional with limited user rights. Some of our technicians need to change IP addresses to connect to devices of management, that's why we added them for the group 'Network Configuration operators. Some devices accept only connections with a certain speed (link speed & Duplex is set to "AutoDetect" as default), so the speed must also be defined by the technicians themselves.

  The problem is that for the 'Network Configuration Operators' group, the "Advanced" in "Network connection properties" tab is not visible. Is it possible to see the Advanced tab (or change the speed of connection & duplex) without administrative rights?

  Thank you

  Steve

  Hi Imran,

  Thanks for your recommendation! I did, this is the link to the thread: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/8affd9e4-63a6-44c3-a259-59aad74b45f6

  Steve

• VLAN again added, problems detected on guests during the detection of new network configuration

  Hi all

  I started facing a strange problem trying to use a new VLAN configured in my vCenter environment...

  Basically, my system 'fight' to identify the new network label (VLAN) configured, leaving systems disconnected from the local network.

  This condition disappears only when I change the VM touched, assign a label of different network (VLAN), apply the changes and restart the process by configuring the new VLAN return.

  We will use an example to explain better:

  • I have a named Windows Server/Workstation VM: VM1
  • I have 2 VLANS configured in vCenter: VLAN50 and VLAN70

  VM1 is sitting on the VLAN50 and has the static IP address configured.

  I start the migration of the machine to a VLAN different, by editing the network settings of the operating system (IP, MASK, GW, DNS entries...) and replace the label of VM1 VLAN70 network.

  At this point, the machine NIC shows as if it could not connect to what in the network, although it is configured accordingly in order to communicate in the new subnet.

  I have change the VM again and change the label of a network VLAN different from VLAN70, click OK. Immediately, I change VM settings to assign in return the VLAN70.

  After that, the operating system recognizes the network successfully and starts working as expected...

  All of my virtual machines use VMXNET3 adapter and my version of vCenter is v5.5 build #2646482

  No idea what might happen?

  Concerning

  We found the problem...

  It was not associated with VMware, but a network configuration problem: (ESXi connected to two switches, one of them with the VLAN configured correctly and the other does not...).

  Thanks for the help