Racing engine noise

Similar Questions

• Word racing engine

  is there a way to turn off "Word engine dressing '? It really makes me a lot of headaches! Thank you!

  Acrobat installs a virtual printer to help create pdf files. The virtual printer tells the computer system and Microsoft Word various information such as fonts are installed in the system. When you change printers (real or virtual), Microsoft Word tries to change the document to the screen so that the glance at the screen will be how to print the document. When you create a PDF with Acrobat without going through the virtual printer Adobe PDF defined as the printer to work, the words on the screen file will not match how the document looks when printed.

• Camilieo Pro HD - shakey pictures and noise while zooming

  I recently bought Camileo pro hd camcorder. I found some problem with that.

  1. when I take pictures (photos) it always shakey, I keep my hand steady but its still shakey, 95 photos on 100 are of bad quality. Let me know if there any adjustment required.

  2 when I take the movie, it creat engine noise while zooming and plays it as well as I play my recorded movie. that is that irritating noise was also recorded. Let me know if any solution available.

  If it comes to manufacturing defects I can return the product. Let me know as soon as POSSIBLE.

  Thank you.

  Hello

  If you are in record Mode, you must enable the stabilization of the Motion.
  To activate the stabilization of the Motion:
  In video/photo recording Mode, press the Enter button to move to the record menu.
  Use the left/right buttons to select movie Mode. Movie Mode submenu will pop out on the
  screen. Use the up/down buttons to select Motion stabilization and then press the Enter button to move to the
  Submenu of movement of stabilization. Use the up/down buttons to select ON or OFF. Press the Enter button to confirm the setting and exit.

  With regard to the noise of the engine;
  I m not very good, but maybe you could reduce the sound volume while recording don t know not if it be helpful, but you can try it.
  But usually the cam should record everything and all the sounds that are noticeable

• Help with the purchase of camera - Amazon announcement

  What is the difference between the options of 18-55mm and 18-55 mm + 55-250 mm? It seems that the second option would be more expensive because it has zoom features. Am I missing something, or is it a much better deal to buy the 18-55 mm + 55-250 mm option?

  Here is the link for registration:

  [link removed as directed by forum]

  You did . The option of two lenses is $ 100 more, but you get a telezoom.

  The 18-55mm in single lens kit lens is a goal of the STM, which is a newer version of the lens. The two lens kit is not. STM is a good feature if you are going to be filmed; It is much quieter focusing then you will not get update engine noise in your videos.

  The T5i is a very good case.

  Since you are a beginner, download the two lens kit so you can discover a wide range of photography - you can never have too much telephoto if wou want to photograph wildlife.

• CP 1518ni does not print

  CP 1518ni to a friend and he just got a used does not print.

  It's about everything else such as:

  Web accessible via rj45 interface.

  seems to boot ok.

  When I launched a print or make a report from the Control Panel, the display shows the impression and the green light blinks but nothing happens-no print, no noise from engine - nothing.

  I can 'x' out the print job on the printer.

  saitsifed computer that has printed the print job.

  has worked for a year and then put in stock.

  black ink is about 19% while others are in the 1940s.

  has shaken the toner cartridges.

  Conversely the paper.

  Since it is not print from the Control Panel doesn't much try since not a driver problem.

  connected directly to a wall outlet.

  the display seems to work fine.

  I'll make a wild speculation and guesses that a connector somewhere it should be ripped out and reconnected.

  What gives me this idea, is that there is no engine noise he's trying to pull the paper.

  Electronics seems ok.

  I need a copy of a repair manual to figure out how to get inside for the cards and connectors and try my theory.

  the plastic parts on more recent printers seem all to snap and difficult to understand to tell - assemble.

  other thoughts before you get out the screwdriver and start spinning.

  It should be good to use from month to month. I would recommend that during long periods of inactivity that you remove and shake the cartridge (as I described above) before using the machine. Maybe just create a copy or a test print once a month to make sure that everything works as expected.

  I'm glad to hear that the problem has been resolved, and you could get this printer up and running! If you wish, you can mark my post as the solution to the issue that that other customers will know the best method to resolve this question should they encounter it themselves.

  It is for me to be here for you when you need me, if you ever fear to come on these forums and ask for help from me or my colleagues. We will do what we can to solve your problem.

  I hope that you have a wonderful week and I hope that the time where you are is as beautiful as it is here!

• Microsoft (fs9) 2004 Flight Simulator

  Hello, I am running Window 7 Professional and am having a problem with the sounds of engine in Flight Simulator 2004. When loading the default aircraft is a Cessna 172, all sounds including the engines properly. However, when I choose any other aircraft, no engine noise is present. I tried several relocations does not. All cursors are where they should be in the settings. Oddly enough, I have also run FSX, and all the sounds on all devices are working correctly including the engines. Thank you.

  "When loading the plane by default... However when I choose any other device, no engine noise is present. »

  As the sound issue is specific to a game (or add on pack aircraft?) and if someone here who has this

  game comes, you would probably do better to ask your question to one of the specific Flight Sim sites.

  .

• Stand-alone 3502I without controller?

  I have a client with several former Aironet 1121 G from WAP.  In one place of the factory several big engine noise levels prevents a reliable connection to the WAP, even if it is located in the same room as users.  I mean updated the 1121G to the 3502I to take advantage of Clean Air technology.  This raises two questions:

  1) will be able to effectively manage the RF noise only 3502I or it requires a WAP network to work properly?

  (2) the 3502I requires the controller of CT2504 to clean at work, or it will run in stand-alone mode?

  Thanks in advance,

  Joe

  Does that drop the connection speed down to about 1Mb/s?

  NO. 802. 11A is high-speed, short-range radio.  802. 11b is long range and low speed and has 3 channels of Alcan.

  Unfortunately, if you have a noisy RF environment, putting a WLC (DCA, with active PTC) can help.  Without this, you need to constantly monitor each WAP and manually change the channels and Tx power.

  You are in a situation a little "who comes in first place, the chicken or the egg".  If you cannot afford to get a WLC with your solution, don't bother upgrading.  It's a waste of money.

• LR4 removal/spot healing brush

  I was hoping and waiting for better healing/spot removal brush in LR4... and now I'm disappointed

  should I wait for LR5?

  I am completely with you.  I need to take almost every image in Photoshop to use the Healing Brush, and it's a giant pain in the a$ $.  It's really disturbing to workflow and I cannot that assume Adobe does not add this feature to LR because it would be cannibalizing PS too.  I talked to several photographers who feel the same way.  They use PS to all its layers and text tools etc etc - just very good healing tools.  LR is a very good organizer, the RAW image processor, the engine noise reduction, but it is not what I need to do for any editing when it comes to portraits.

• HP ColorLaserJet 2840 - engine scanner at startup grinding noise

  Hello

  I have a HP ColorLaserJet 2840 PCL series and I bought it in 2008.

  It has worked great.  A couple of years ago I had to replace the 'fusion' in the unit because he would not be commissioning more.

  No problem.

  My last problem is that when I turn it on and it goes through all of its audits, when it gets to control the engine scanner (where the bulb scanner goes back and fourth small quantities before he finishes coming) the engine scanner will start to do a sort of "grinding" noise, like it is stuck.

  He's going to do for about 30 seconds and then fail with "error scanner Error #5".

  It was first of all a few days ago I could stop all unplug, wait and restart.

  That is all good.

  It restarted several times over the past few days and it worked ok.

  Now, however, he won't return to the top before this problem.

  I think the engine to scan on the scanner bed is maybe bad.

  I'm looking for some other opinions.

  Has anyone else had similar issues like this with this printer model and what are the possible solutions.

  Thanks in advance,

  Please check at http://partsurfer.hp.com

  As this is an older device, so you will need to look for availability of local dealers part HP or other sources also.

  You can also contact the regional support of HP and check if the product is still supported and try to get repairs.

• Re: Satellite P850-12 x "pop" noise is in the left hand speaker

  You can, or that you have perhaps not seen my other problem with this laptop, which resulted in a replacement unit.

  Now for the replacement, I got it for a week and everything was perfect until last night when I started to hear a cracking sound from one of the speakers. (At the time I was playing a racing game, so the audio was engine sound, a particular range of engine note led to the speakers to Crackle).

  I immediately feared and rejected volume and disconnected. I came back today to test the question and see if the problem persisted. While I have not heard the crackling sound today there is a very loud 'pop' noise coming from the walls of the left hand.

  The sound of the Pop occurs at the beginning or the end of a sound being played. Doing this regularly at the end of a video, if video is interrupted by a change in youtube Web page.

  I don't want to have to ask for a replacement because of the quarrel provoked but may end up doing if the problems cannot be solved. I noticed similar problems with other laptops on some forums, so I'm the audio control drivers and other software that might have created the problem.

  Hello

  You have an audio chip installed on your system?
  I read in a thread on a more powerful sound which was produced from left speaker.
  The solution is to disable the 3d immersion option available in Audio Smart.

  But if your speaker equipment is affected, then this option would be useless in your case
  Maybe you need to get in touch with ASP again to solve this problem

• Analog input noise, best way to filter?

  Hello

  I use a cRIO (w / LV 8.5) to make a lever on an electric race car and the driver throttle control signals are 0 - 5V or 0-5kOhms.  Now, I work with a signal of 0 - 5V for some tests.  If this gas 0 - 5V input arrives, the cRIO resembles certain conditions, and if all goes well, just if he crosses this 0 - 5V located on the engine without changing it at all.  So I have a NI 9201 AI module and a module NI 9263 AO.  Our first hook this system up to a motor on our chassis dynamometer, however, we quickly realized that there too much noise in the signal of butterfly, and engine jerking around, kind of like he's possessed.  We thought that maybe we could live with that, sort of like the irregular Growl, you get a burly V8, thinking that this might be nostalgic for the former riders, but it is a bit difficult for our lab tests pending.

  I had a look at a few examples of using a lowpass butterworth filter on the FPGA, and this seems to be a nice implementation.  My stumbling block comes from the fact that I use calibrated data, value engineering coming out of the modules and just passing the value of the voltage of my HAVE on area of OCCUPANCY.  Meanwhile, the Butterworth filter can operate with integer values.  I then tried affecting the entry and the exit of the modules of the raw data and not calibrated sends me data whole instead of FXP and then passing the entrance through the filter and then straight in the output module.  It seemed to work at first, but then I realized that my exit was not mapping to my entry, the voltage output was far from what I was before.  This is because the calibration of the raw data to engineering values is different for the two modules, and integer values, as I passed from one to the other do not match values of voltage.  Then I thought that I could take in the raw data from the input module, filter it and then pass it through a calibration unit which become values of voltage, and send data to the output module calibrated (reset the rear output of Raw to calibrated, but keep the entrance of raw data.)  That was when I realized the calibration of raw to engineering values, I've seen always happened in vi of the host, and that the calibration does not support the FPGA that blocks, I found in the examples.

  I don't see how do now (maybe throw a gain to adjust the output data until my entry maps correctly to the output) but she think there must be a more legitimate way of filtering data from a module of HAVE and that passing on an AO module.  Thank you in advance for your help!

  Jeff

  Hybrid of McGill Racing Team

  I've backed a LabVIEW 8.5 project that shows an example of what you're trying to do.  There is a test case of windows showing the result of the filter.  I think this can help.

  The analog input is 12 bits and the output is 16-bit, I'm sure that is part of the issues you dealt with that.

• Mac Book upwards, the heating fan noise

  My mac book has problem with heating past 3-4 days, the fan creates a lot of noise, initially I was using tabs n of several apps at the same time then it was working fine, but now he hangs up. Sometimes apps leaving automatically.

  Here is the report EtreCheck, can anyone help?

  Hardware Information: ⓘ

  MacBook Air (13 inches, beginning 2014)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir6, 2

  1 processor 1.4 GHz Intel Core i5: 2 strands

  4 GB RAM not extensible

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 343

  Video information: ⓘ

  Intel HD 5000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  SD0128F SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) / [Startup]: 120,12 GB (15,34 GB free) (weak!)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  /Library/LaunchDaemons/com.Momus.NET-preferences.plist

  ~/Library/LaunchAgents/com.jdibackup.JustCloud.autostart.plist

  ~/Library/LaunchAgents/com.jdibackup.JustCloud.notify.plist

  3 files adware found. [Remove]

  Kernel extensions: ⓘ

  /Library/Extensions/HuaweiDataCardDriver_10_9.kext/contents/plugins

  com [no charge]. MBB.driver.MBBACMData (5.01.03.00 - SDK 10.8 - 2014-02-10) [Support]

  com [no charge]. MBB.driver.MBBActivateDriver (5.01.03 - SDK 10.8 - 2014-02-10) [Support]

  com [no charge]. MBB.driver.MBBEthernetData (5.01.03.00 - SDK 10.8 - 2014-02-10) [Support]

  / System/Library/Extensions

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.6 (26977) - 10.4 SDK - 2016-04-18) [Support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.6 (26977) - 10.4 SDK - 2015-01-31) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.6 (26977) - SDK 10.5 - 2015-01-31) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.6 (26977) - 10.4 SDK - 2015-01-31) [Support]

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 153 tasks Apple

  [operation] 78 tasks Apple

  Launch system demons: ⓘ

  [operation] com.seagate.TBDecorator.plist (2013-10-12) [Support]

  [loaded] 46 tasks Apple

  [loading] 160 tasks Apple

  [operation] 83 tasks Apple

  Launch officers: ⓘ

  [performance]    HWPortCfg.plist (2015-03-10) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-15) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-12-22) [Support]

  [loading] org.macosforge.xquartz.startx.plist (2015-10-16) [Support]

  [failure] ouc.plist (2015-03-10) [Support]

  Launch demons: ⓘ

  [loading] com.Momus .net - preferences.plist (2016-04-25) Adware! [Remove] 

  /etc/change_net_settings.sh

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-15) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-15) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-16) [Support]

  com.Apple.milobe.plist [no charge] (2016-04-25) -Executable not found!

  [loading] com.google.keystone.daemon.plist (2016-03-03) [Support]

  [loading] com.microsoft.autoupdate.helpertool.plist (2015-10-18) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.microsoft.office.licensingV2.helper.plist (2015-08-15) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-12-22) [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist (2015-10-16) [Support]

  User launch officers: ⓘ

  [failure] com.jdibackup.JustCloud.autostart.plist (2014-12-07) Adware! [Remove] 

  [loading] com.jdibackup.JustCloud.notify.plist (2014-12-07) Adware! [Remove] 

  [failure] com.seagate.dashboard.plist (2015-07-06) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Hidden Safari application (/ Applications/Safari.app)

  Hidden EverNote Application (/ Applications/Evernote.app)

  Dropbox application (/ Applications/Dropbox.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat Reader DC.app/Contents/Helpers/AdobeResourceSynchronizer.app)

  Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  Other applications: ⓘ

  [ongoing] com.evernote.Evernote.47712

  [ongoing] com.getdropbox.dropbox.47392

  [operation] com.google.GoogleTalkPluginD.108512.4C8D17AE-E06A-4B52-959E-D4A09891F9CF

  [ongoing] com.Google.Android.mtpagent.188192

  [loading] 399 tasks Apple

  [operation] 196 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-27) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-15)

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-27) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-15)

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  SharePointBrowserPlugin: 14.5.8 - SDK 10.6 (2015-11-21) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  JavaAppletPlugin: Java 8 66 update build 17 (2015-12-31) check the version of

  Safari extensions: ⓘ

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-03-31)

  SaveFrom.net of assistance - SaveFrom.net - http://savefrom.net (2015-10-22)

  Google Scholar button - Alex Verstak, Google - https://scholar.google.com/ (2015-10-22)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-16) [Support]

  Java (2015-12-31) [Support]

  Seagate for Mac OSX dashboard (2015-06-09) [Support]

  TeXDistPrefPane (2015-07-06) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  2% fontd

  1% kernel_task

  0% GoogleTalkPlugin

  0% cfprefsd (2)

  Top of page process of memory: ⓘ

  967 MB com.apple.WebKit.WebContent (8)

  464 MB kernel_task

  Mdworker (19) 238 MB

  Safari of 217 MB

  49MO com.apple.CommerceKit.TransactionService (3)

  Virtual memory information: ⓘ

  48 MB free RAM

  3.95 GB used RAM (645 MB Cache)

  72 MB used Swap

  Diagnostic information: ⓘ

  30 April 2016, 10:17:12 self test - passed

  April 29, 2016, 23:20 / [redacted] Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-04-29-232000_.cpu_resource.diag[details]

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  April 29, 2016, 18:37:42 ~/Library/Logs/DiagnosticReports/AirPlayUIAgent_2016-04-29-183742_[redacted].cr ash

  com.apple.AirPlayUIAgent - /System/Library/CoreServices/AirPlayUIAgent.app/Contents/MacOS/AirPlayUIAgent

  April 29, 2016, 12:53:02 / [redacted] Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-04-29-125302_.cpu_resource.diag[details]

  April 29, 2016, 11:31:11 /Library/Logs/DiagnosticReports/rastertoescpII_2016-04-29-113111_[redacted].cra sh

  /Library/printers/Epson/InkjetPrinter2/filter/rastertoescpII.app/Contents/MacOS /rastertoescpII

  April 27, 2016, 19:19:57 ~/Library/Logs/DiagnosticReports/LiveUpd_2016-04-27-191957_[redacted].crash

  com.yourcompany.LiveUpd - d /usr/local/hw_mp_userdata/airtel/OnlineUpdate/LiveUpd.app/Contents/MacOS/LiveUp

  Uninstall JustCloud.

  http://www.justcloud.com/uninstall-help

  If JustCloud is running is running:

  Finder > Applications > utilities > activity monitor

  CPU > JustCloud

  Select it and click the force quit a process in the upper-left corner of the window.

  Delete other Adware.

  1 disable all Extensions and test them.

  Safari > Preferences > Extensions

  To uninstall the extension, select it and click the "Uninstall" button

  2 safari > Preferences > Search > search engine:

  Select your preferred search engine.

  3 safari > Preferences > general > homepage:

  Set your home page.

  4. free use Malwarebytes Anti-Malware for Mac / AdwareMedic to remove the adware

  https://www.Malwarebytes.org/antimalware/Mac/

  Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit Malwarebytes Anti-Malware.

  I'm not familiar with this "Momus.net".

  Available disk space is very low.

  Macintosh HD (disk 1) / [Startup]: 120,12 GB (15,34 GB free) (weak!)

  
  

  Delete unnecessary applications and media on an external drive.

• Adding a search engine toolbar

  using firefox 11.0 on win 7 64 bit and cannot load a search engine toolbar. I did some research and found that I need to click on the search engine icon, but it is not one on my browser. I have not found another way to open the window "manage search engines". also frustrated that google has abandoned their search bar for firefox. thinking AVG load them would show up - it didn't. However, when I type a search string in my address bar, I get the avg search engine results.

  @LongHawl, is the search box here, but the drop/icon-triangle is missing? I see two ways that the malware could have hidden button. The first would be if you have an add-on that was left. If you check

  Orange Firefox button or classic menu Tools > Modules > Extensions

  You will find all this useless or suspicious noise? If so, try to disable and restart Firefox to see if that helps.

  The second would be to add a style rule in a settings file that may exist in your profile folder. If you open

  Help > troubleshooting information

  In the first section, you will find the button 'open containing folder '. Click that, and then double-click the chrome folder. If you see a file named userChrome.css, then we'd like to check that all the rules that affect the toolbars in the file. It is a text file, which you can open with Notepad or Wordpad or your favorite text editor. If you copy and paste the file here rules, we can take a look.

  If there is no questionable Add-ons and no userChrome.css, then, hmmm, you might want to try resetting your toolbars in their default configuration. This article in the section "reset toolbars and controls" has the instructions: Back and forward or other toolbar items are missing. Troubleshooting | Firefox Help. (To avoid losing other customizations, do not check the other boxes.)

  A little luck?

• iPhone has a lot of static noise on the bluetooth with my built-in car phone connection

  Hi all

  I have the new iphone SE and talking with my hands-free kit.

  the other sounds of the game has a lot of static noise and he get to to the point that I do not understand what they say.

  so far, I got iphone 5s connected to this car phone, and it worked fine.

  How can an idea be fixed?

  Thank you

  Sigalit

  Engineering Apple is aware of the problems of the SE has its bluetooth & working on a fix.

• The projector noise Camileo H20 movie while watching a movie

  I recently bought a Camileo H20 and when I visualize a movie it makes a noise of engine as it was a film projector.

  At first, I thought it was a fun feature, but later, I tried to get rid of this noise.

  I tried to turn off the sound, but it always saves with the sound and this unwanted noise.

  I put the camera back in the shop of the seller?

  Have you read the user manual? It may contain instructions on disabling this noise.