Radio turn on T420s cause my networks to turn off

Similar Questions

• wireless radio turns off every 2 minutes

  I have a Thinkpad Z60t, running on Windows XP.

  I have the wireless switch physical on the side panel on the position we (that is to the right).

  At the beginning, I can't connect to any wireless network without problem. However, after about 2 minutes of not actively using the internet, the green 'radio Wireless' on the front panel turns off and I lose my internet connection. Then I do "Fn + F5" (or ThinkVantage button-> manage my connections-> Radios in Wireless Power on / off) to activate on (and get the light to go back to being green). Then I have to reconnect to the wireless network.

  I think that this is a common problem. I tried several suggestions that I found on other forums, including ThinkVantage button-> manage my connections-> select location-> Open Access Connections profiles-> Configure-> location of switch-> UNSELECT "enable automatic location change". Actually, this method seems to work for a few hours, but then stopped.

  I am sure that my wireless network is stable - my roommate's laptop does not lose the signal every 2 minutes as I do. I think my laptop wireless radio turns off automatically after 2 minutes of no use, and this feature should be turned off somehow.

  Help, please. I'm frustrated to have to reconnect manually every 2 minutes.

  -Ed

  Open Control Panel, go to the system, the property of equipment/system, then go to Device Manager.

  Under the ownership of the wireless card (right click on the wireless card and property select), there are settings for the roaming of aggressiveness, energy saving and power output.

• E560 wireless radios turned off after Windows update

  Hi, I have 2 new portable e560. When I finished all the windows update and restart the computer, the wireless cannot turn on. I do FN + F8 and click on, but it doesn't do anything! I can activate and DΘsactiver bluetooth and mode plane but not the wireless.

  I have all the latest version of everything (wireless driver, BIOS, hotkey,...) and cannot do anything. And this appen on 2 different (but new) system.

  Logins does not. If I go to the Manager, I see the device and it is activated.

  I reimagee the system with the original Lenovo DVD and his work. But when I did the update of Windows (one of the 151 I need to do), the device will stop working. Help, I've lost 3 days on this problem.

  Thank you and sorry for my English, I'm french

  Found the solution: reset the BIOS! and everything works now...

• Wireless radio turns on and turns off...

  Hi new here and I thank very you much for your help.

  My wireless radio turns off after five minutes on its own.  I saw on the net a fix by going to Access IBM...

  Open connections to access and go in Configure, then global settings.  Uncheck the box "Enable Wireless LAN automatic radio"

  Logins will be automatically turn off the wireless connection when idle to save power.     The only problem here is that Access IBM does not.  He gets up and you can not click on anything.  I read that it is because there was a security hole in an old version of Adobe Access IBM used, and they is plugged but never implemented up to date. You can not use this...    Anyone know how to bypass this or another solution to my problem.   I have a T-40, is said by the way.

  Thank you.

  "Someone posted in another thread Re: wireless radio turns off after using Solutions to access IBM Options forums.lenovo.com/lnv/view_profile?user.id=22919_2";return this.s_oc? this.s_oc (e): true "target = _blank > that they had the same problem, so I tried again understand the correspondent's suggestion, and that is what I did and it works for the last two hours.

  But let me introduce to you the way I found to do it.

  Panel of configuration-system - hardware - click device (bar) Manager - go to network adapters - I RIGHTclicked Duoband Wifi - click Properties - click on Advanced.    In the Mode of energy saving and the radio list we / off, I turned the power saving off the coast and turned the Radio on / off.  Everything seems fine.

  Once again:

  In the properties - Advanced:

  Radio on /'Off - we.

  Off - Mode power saving.

  Thank you for the help and happy that I can spend it.

  See you soon.

• BlackBerry Smartphones Radio device turn off? T.T

  Hello. I just bought my blackberry phone and I want to download app world! I am facing a problem called radio turn off device? I do not understand what am I supposed to do. Please help me!

  Blackberry app world is accessible via the server of your service provider's blackberry so that you cannot be used outside of a data plan. There are apps from third party like Whatsapp, Google Maps that you can download from the browser.

  To access internet using data for navigation charges and your network provider downloads follow these steps:

  Go to the Options - Advanced Options - browser - configuration of the default browser change to your provider e.g. vodafone, you can also open the WAP written icon.

  If you are in a place where BIS is available I suggest you get a plan costing about US$ 8 as using packets of data will cost much, BRI is paid for once every month and not by its use in most cases. We hope that you respond.

• Wireless WAN card keeps turning off F5521GW

  Hello

  Yesterday I installed F5521GW modem in my x220t and after downloading the drivers found on the forum, it worked fine.

  So I decided to do the automatic update, it finds some drivers associated with WWAN adapter (GPS, "Lenovo Mobile Access" and I guess that little bit more) and now I'm stuck to as minutes (three?) of the internet, and after that WAN wireless radio turns off, just like a unused WiFi card. It happens every time, when the connection is made and is obviously used too.

  I turned off "Disable mobile radio when you are offline" about access, also what card WAN goes off when you use the login, it crashes. I am connect using the Windows network and sharing Center, 'Broadband Mobile' application leads me only to a kind of activation (but I have a job... active service) and nothing more and 'Mobile access Lenovo' gives me a registration page, I guess for a kind of marked Lenovo internet service provider, as well as some icon saying that no mobile broadband is detected

  How to get rid of this auto card WAN? It was working fine until I decided to do an update...

  Partially replying to myself, but I solved my problem: I have disabled automatic shutdown of the wireless card... And it applies to WWAN too

• Wireless WAN T410 turns off after round approve 3 minutes

  Hi all

  I have a T410 with windows 7 32-bit company. The normal Wi - Fi connection and connection blue tooth are stable and works well. However it seems that Wireless WAN radio turns off after 5 minutes without worrying if I'm logged in or not. I have installed the dial-up connection program and reconstructed profiles with no luck. I also change the power management setting both in the Device Manager in Control Panel.

  What else I can try.

  Note This is for the mobile card radio.

  Concerning

  J

  Hello guys,.

• iPhone WiFi 6 causes of network disruption

  There is an old (locked) topic that seems similar unanswered: iPhone WiFi broken MacBook WIRELESS

  In our House, we have:

  -Airport Extreme (v2)

  -MacBook Pro

  -MacBook Air

  -iPhone 6

  -iPhone 6s

  -iPads

  We have noticed recently that our Internet connection was really inconsistent.  After some time, we have done tests and concluded that when my wife turned on the wifi of iPhone 6, all other devices would have connectivity problems (slow, fall of entry and exit, etc.).  Turn it off, all right, turn it back on, everything is twisted.  We tried to look to see if all the apps were using a lot of data (pictures just Google had destroyed our wireless bill, so we removed that, but even with that gone, the question remained), but nothing was.  But even if I do a huge download or download on my laptop it does not cause these same questions, it seems to be a problem of low level network and NOT only volume of use.  Even with the updated iOS (9.3.2), the problem persists.

  Are there known problems or patches (which I don't see Google search) about the interruption of network iPhone?

  I've seen this problem posted here before with no clear resolution. The one feature that might explain it is prioritization of media on a router. However here is a user points to the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite A30 - radio WLAN is turned off

  I just installed a mini-map broadcom wireless and drivers for my Satellite A30 which shows as working, but when I try to connect, it tells me that the radio is turned off.

  I tried the switch on the left side and press F8 but nothing seems to happen.

  Hey,.

  Before you start a lengthy discussion, you you connected your wireless card WLAN antennas?

  Or let say, it's your laptop equipped with two antenna cables? Usually it s a black and a white cable you need to connect to the wireless network card.

  See you soon

• Update support for Realtek RTL8168/8111 Ethernet NIC (NDIS 6.0) network turns off. System needs to restore to repair.

  My system features:
  OS: Win 7
  Motherboard: Gigabyte GA-EP45T-UD3LR LGA 775 Intel P45 ATX
  Vid card: 9800GT BFG
  CPU: Intel Pentium E6300 Wolfdale 2.8 GHz
  Memory: Mushkin 4GB DDR3 1333 (PC3 10666)
  Sound: on-Board (SoundBlaster Audigy 4 installed but disabled)

  I went through the system updated with Windows 7 a bit recently, and when I installed the optional updates my network should be gone after reboot.  After several attempts to recover or even create a new Windows network is never no material at all for the network.  It can even detect my router or connect directly to the internet through my cable modem.  The only way for me new network access is back using System Restore.

  I have narrowed the question until the 60 KB update option for published Realtex network devices 11/15/2008.  I could not solve much more deep, because all processes automated are more or less useless without the support of the internet, and I did not understand how to turn off the training wheels of Windows and allow me to tinker with advanced settings again.

  Someone has encountered a similar problem and found a solution yet?  All of my updates seem to work except this one very well.  Any tips?

  Thank you.

  On a side note: I love the automation with this new version, but I'm an advanced Windows user and I would like to be able to tinker with and debug some things on my own.  Y at - it 'Advanced mode' setting for things like the Panel anywhere?  I could not find one.

  Hello

  I am pleased to have been of assistance. See the last two paragraphs here on how stop these old driver updates of
  loading, whilst on Windows updates.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Application of CLDC cause the power of the device is turned off.

  Hello

  One met this problem, when the execution of my application and for a while, the device has been turned off automatically. I tested several times, always happens, happens on dperipherique (not on the Simulator), the so I can't debug.

  My application is a SNS client it's network connection (http) and persist the data on the device, of course, the user interface to display the data.

  I think there is a mistake in my application caused the device to be off power (only slide off the battery voltage may start the device again). Anyone have any idea what could cause this?

  Thanks in advance.

  MoWriter

  OK, it seems apparent to the bad battery. Even thoug, it showed there is 1/3 battery, when some app run (not my own application), it would be off.

  If I plug the charger while test, then no power offshore.

• BlackBerry smartphone the Wi - Fi radio is turned off

  Recently my WiFi is not working on my Blackberry Torch. The WiFi area under manage connections gray towers if checked momentarily and then turns off automatically. Whenever I try to connect to a network that I have already put in place (such as my house), my phone says impossible to turn on the WiFi and WiFi radio is turned off.

  I tried to restart my phone, turning on and outside and even take out the battery. Nothing seems to work!

  What can I do to fix this?

  It actually just resolved on its own... it did not work for 2 weeks and now all of a sudden it works. I have nothing else.

• I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that. In the ideal, of group policy or some ways to disable all the computers on the network

  I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that.
  In the ideal, of group policy or some ways to disable all the computers on the network

  Some info here (Group Policy)-> http://www.unidesk.com/blog/how-disable-firefox-auto-updates
  
  Above article refers to-> http://sourceforge.net/projects/firefoxadm/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Somehow my new Apple TV 4 causes my Panasonic Plasma TV turns off every 30 to 60 minutes.

  Somehow my new Apple TV 4 causes my Panasonic Plasma TV turns off every 30 to 60 minutes. I thought for sure I had capacitor problems with my TV (he is about five years old) but my wife suggested to check our new ATV4 because the problem started just after Christmas when we got the new ATV4 and the problem occurs with our ATV3. I was skeptical but I have tried to unplug the power cord on the ATV4 and to my surprise the TV cutting question disappeared, so I have to have my ATV4 unplugged when not in use and plug it in when I want to use it, a real pain in the *. If accidentally, I forgot to unplug my ATV4 after using my TV stops every 30 to 60 minutes after my ATV4 is connected and not in use. I'm at a complete loss as to what is causing this problem. For any help or suggestion would be appreciated.

  ATV turns off after a certain period of time in the settings: http://help.apple.com/appletv/#/atvb7a7550e3

  The ATV also has the ability to control the power of the TV via the HDMI cable, if the value.

  I will try to put the ATV to sleep immediately after use, as explained above and see if the TV turns off then.

  If so, go into the settings, remote controls and disable control of your home with remote control entertainment system and see if only he stops.

  When the TV turns off, it is on the entry of Apple TV and the screen saver or you look at another entrance, for example, a cable?

• Stay of connector on cable network after having turned off the Satellite Pro A120

  Hello

  The green light from the connector of the network cable to the back of the laptop turned on when the laptop is turned off (no cable is connected).
  It doesn't matter if it's on battery or power. And when it is turned on, the light goes out.

  Any idea?

  Thank you

  KAV

  Hello!

  Is in the BIOS wake up on LAN enabled? Try turning it off.

  In addition an update of the BIOS if you n t to have the latest version.

  Good bye