RADIUS 2-factor of view 5.1: Response Message
I use this guide to set up a custom authentication provider 2: Installation of VMware View 5.1 RADIUS for authentication
When you use the Access Challenge packet to request additional data from the user, it would be possible to display content of the response Message (attribute 18) to the user in Client mode?
For example, instead of text "next $ProviderName the answer", display the contents of the Message-response field. Or better yet, show a shape similar to the one that appears when RSA SecurID requires a PIN change.
The latter is probably a long shot, but I'm quite happy to simply display a custom text. I am using view 5.1.0.
You are right. Currently, just view Clients implement a fixed guest in the case of a challenge of access. In most cases, that's fine because it is obvious that the user must make.
The line of text from the challenge of access RADIUS is sent down to the view customers, but we will need to be updated to be able to present this guest.
Mark
Tags: VMware
Similar Questions
-
Hello
I had set up a POP3 to my gmail account when I was away from the office to set up an office off so when I got home, because I is more necessary than this account and it was causing some problems for me, I deleted it. I think that's when the question began that I describe in the subject line: all messages in my Inbox display a response message has been sent, even if no message has been returned.
Is there a way to fix this?
A side-question: I used the POP3 account to respond to some emails so I was missing and since deleting that account, I can not longer see these details... message there at - it a way to recover these?
Thank you!
PS - Please, if in response, use profane... as I'm not very versed in thunderbird or computer General technical mumbojumbo!
move to the queue of the Thunderbird product
-
Get the blue screen when you create a new message or the response message in OWA Exchange 2007
Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)
Hello
I suggest you post the question in the forums and check them off below if it helps:
http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/
It will be useful.
-
I find myself with a group of response attached to the original e-mail messages. I can provide the original e-mail message exclusively to others so I want to detach and remove all the response information.
Hello
What email program are you using?
Perhaps it would be not possible to separate the original message response message. You may need to contact the provider of e-mail for assistance on this issue.
If you are referring to Hotmail or Windows Live Mail so here are the links of support that might help you.
http://windowslivehelp.com/product.aspx?ProductID=1
http://windowslivehelp.com/product.aspx?ProductID=15 -
Feedback Option advanced response messages
I use 8 Captivate. I have a choice of questions multiple quiz with 3 options, each with a feedback: answer option advanced, 1 correct and incorrect 2. When I got out to HTML and preview the quiz in Chrome or IE11, boxes of your comments do not appear. This works well if output as SWF, but I need to output to HTML
Still, I have installed 8.0.3.290 with 9, will check a second time.
Just tried it out with a QUIZ, with a correct answer (only way to have advanced the answer option work) and everything worked as expected for me when I saw HTML in the browser. Then I published in HTML format and had a different opinion: everything is OK.
It's because of my version of 8 or something wrong on your side.
My configuration:
- 4 responses
- Infinite attempts
- for incorrect responses: message to show your comments and action 'no action '.
- for the correct answer: Show feedback message (changed its color) and action "continue".
-
Unable to extract tran:response - message from http proxy
Hello
We ask a backend remains with the proxy service. Its a create operation that gives us no response. We need to identify the response based on the http response code
When we test from file biz, we can see in the console the http response code and the response message. But when we receive the answer that we are not able to see them.
Response file seen biz.
< con: metadata ' xmlns:con = ' http://www.BEA.com/WLI/SB/test/config "> < tran:headers " xsi: type ="http:HttpResponseHeaders"xmlns:http =" http://www.BEA.com/WLI/SB/transports/http "xmlns:tran =" " http://www.BEA.com/WLI/SB/transports "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance "> < http:Content-Length > 235 < / http:Content-Length >
< http:Content-Type >
application/vnd.mobilethink.Subscriber-v2+XML
< / http:Content-Type >
< http:Date > game, 9 January 2014 16:44:24 GMT < / http:Date >
< http:Location >
http://192.168.55.136:10001 / customer-service/subscribers/1234567890
< / http:Location >
< http:Server > grizzly/1.9.18 < / http:Server >
< / tran:headers >
< tran:response - code ' xmlns:tran = ' http://www.BEA.com/WLI/SB/transports "> 0 < / code tran:response - > . < tran:response - message ' xmlns:tran = ' http://www.BEA.com/WLI/SB/transports "> create < / tran:response - message > . < tran: encoding ' xmlns:tran = ' http://www.BEA.com/WLI/SB/transports "> iso-8859-1 < / tran: encoding > . < http:http-response-code ' xmlns:http = ' http://www.BEA.com/WLI/SB/transports/http "> 201 < / http:http-response-code > . < / con: metadata >
When we tried to extract from the entering these values were not visible in the incoming response.
Please help us how can extract us http response code and the response message to the proxy service
Newspaper $outbound in the log file. If the value is there, you can extract it.
Vlad
-
How to ignore the SOAP server called HTTP response message.
How to terminate or skip SOAP called HTTP server response message.
Hi - We have a problem with the OSB project and try to correct this.
Scenario: -.
System1 sends SOAP message to the 2 system using our service of OSB. Since we have a problem between OSB and System2 (we get the response HTTP system 500 2 code), which is causing problem with system 1.
1-> OSB - 2 system system
For some reason, System1 search failure between OSB and System2 as HTTP 500 error message and start a new attempt to traffic, which we do not really want.
I don't want to send a message HTTP 500-System1 (as interface between the system 1 and OSB works, we issue to the next step).
We tried to set the error handler to the level of the road/pipeline/service but no luck. at the level of the road, we did trigger the error response with option down too.
Could someone pls try to help on this.
I also have a question...
Do we not have an option like 'Terminate' instance osb.. ? I know that this case is done with BPEL but don't see any option with OSB. Please advice.Here is my understanding of what you're trying to achieve:
1 system called OSB Proxy calling 2 system via the OSb business.
System1--> Proxy--> Business--> System2Is that what you want, if system 2 returns an error that you want to remove this error and return a success at system1?
If that's what you are trying to reach then in service proxy call business service in the node of the road (or you can choose to use a legend of service in a separate step). Create a track node error handler (or a handler error step if you chose to use the legend). In this error handler any registration if you wish, and at the end of the Manager error there should be a response successfully. In this way the service will run normally when there is no error. If there is a mistake in calling system2, the stream enters the error handler where you can build any desired response (by replacing the contents of the $body) and a response successfully will forward this response as a success to vitesse1.
However, if my understanding of your requirement is incorrect then let me know what exactly you're trying to implement.
-
Wait the response Message to start the Compensation Plan
Hi all
I implement a plan of the orchestration of a product, all the functions involved running a process and think that the process has an automated task and this task has a first automator to send a message to a jms queue in WebLogic using the sender of Xquery, and the same automated task has a second automator to receive a response to the request message using a receiver Xquey Automator type of external events.
When the order arrives at the automated task, send a message and waits for the response with the same correlation request ID and process this response to continue to the next activity.
If the process comes to the automated task and send a request message and while waiting for the response arrives an amendment to this order, this amendment is not started until the automated task response message arrives.
Could I start the amendment without waiting the answer comes of the automated task that is currently running process?
Thanks again.
AndresG.This behavior is controlled by the order lifecycle policy. Life cycle policy order control States authorized order, their transactions to move between States of command, all conditions or roles for these transactions and grace periods for certain order state transitions. For the behavior you want, you must change the default delay setting (the default is to wait indefinitely as the tasks to be performed).
Specifically, you want to look in control policy, under the State of advancement in State is the change of the process transaction and the tab of the period of grace on the right. This is the operation that controls the State of ongoing change to change an accepted amendment. You can change the duration of waiting indefinitely for a period of time, of a certain value not zero to give him some time to receive the response and complete its work, which is also a known state for the task, or you could it to zero, which will process the amendment immediately and not wait for a response to all your external receiver process and complete the order.
To decide how to use the grace period settings, it is important to understand that the MSO considers only the tasks completed in its compensation plan for the amendments and all the tasks that are in a State accepted (as yours would be after the message was sent to the external system) at the expiration of the grace period are not considered as completed and therefore are not considered in the compensation plan. This means that these tasks will be performed again (mode of) once the order comes from the state change and return to a State in course, as long as the order remains on the same path in the process after compensation. You'll want to think that in the establishment of your grace period.
Marc
-
OBIEE - new view just created. Instant results in 'view data' - slow responses
Hello
I created a view of a table with a long data type, so a function has been used to convert to varchar type. When I execute a select statement with this in Toad or query tool results come back instantly, and when I press 'View data' in obiee they show in 3 seconds. Then I created an answer and put the two columns in the view of the report and he ran so he comes to see the columns. There are 30 000 REB. It takes five minutes to list them. Is it possible to get it to run faster please?
I'm actually just simply wanting to calculate the sum on them, but this takes 5 minutes also. I expected to just list people instantly well.
Any ideas please?
Kind regards
Hilary.Hi hilary,
Have you used this datbase opinion that has been created in RPD in the physical layer by accessing the properties of the table and use SQL and write your review.
Apply a guest on one of the attributes of your report, so you can filter the data in it and you will get less data out of it that gets you in no time.
If the answer scores points for all your discussions. Its label of forum and it would be useful to others.
See you soon,.
KKPublished by: Kranthi.K on April 19, 2011 05:15
-
I store the response of the pop message string using
Locals.ResponseValue = AbsVal (Step.Result.Response))
ResponseValue must be digital (between 0 and 999), how to test if response entered is a string?
You can check if this condition is true:
Str (Val (x)) is x
It returns true for valid numbers, else false.
-
When I select the ANSWER, the original message disappears in the response message
When I choose to REPLY to an email, the body of this message disappears and I don't see what I answer.
This just started two days ago. I must have something clicked by accident.
I have Windows 7, Windows Live Mail 2011
You need to check: include the original message in its response.
WLMail 2009, which was found in tools | Options | Send. It should be similar to WLMail 2011, but if you can't find it, ask the experts here.
Windows Live Mail Forum
http://windowslivehelp.com/forums.aspx?ProductID=15 -
? symbol in the Windows Live Mail response messages
When I reply to a message in Windows mail, my typical answer is always preceded by the? symbol. For example. If I type and send the "thank you" message, it is sent and received '? Thank you' still the? symbol precedes my messages.
In my view, this is a known bug in Windows Live e-mail software, you could drop by the forums Live and post this here to confirm.
writing in the new message: * e-mail address is removed from the privacy... * When I reply to a message in Windows mail, my typical answer is always preceded by the? symbol. For example. If I type and send the "thank you" message, it is sent and received '? Thank you' still the? symbol precedes my messages.
-
Event Viewer/Task Scheduler error message
I get the error message "MMC could not create the snap" in Task Scheduler and Event Viewer. I tried various things, including a reinstallation of the .NET Framework, and nothing seems to solve the problem. Does anyone have any suggestions?
michiganjoe,
Thank you for visiting the Microsoft Answers community forum.The first thing I would try is to run the System File Checker to see if any system files got corrupted:
To run the System File Checker tool, follow these steps:
Click Start and type cmd in the box start the search.
Right click on cmd in the list programs, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
At the command prompt, type the following line and press ENTER:
sfc/scannow
When the analysis is complete, test to see if the problem you are experiencing is resolved.If this does not work, we need a little more information, the better to help you. What version of Vista are you using? When exactly this error happen? Is that what you see in the event viewer, or you get the error when you try to open the event viewer and Task Scheduler?
Have changes made to your computer recently, as new hardware or installed software or an update / upgrade to software or drivers? Have you tried to do a system restore to before the problem came first?
To restore the operating system to an earlier point in time, follow these steps:
Click Start, type system restore in the search box, and then click System Restore in the list programs.
If you are prompted for an administrator password or a confirmation, type your password or click on continue.
In the System Restore dialog box, click on choose a different restore point and then click Next.
In the list of restore points, click a restore point created before you started having the problem, and then click Next.
Click Finish.
The computer restarts and system files and settings are back to the State they were in when the restore point was created.Let us know the status of your problem and if we can also provide assistance.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
don't know what Ive done and can't open anything! has tried to get some pics of a USB key that does not work so started clicking on things now Ive armed the laptop everything upward, as I said when I try to go to the settings by default/Word, IE, firefox, basically everything! the following message appears "window Photo Viewer cannot open this picture as photo viewer does not support this file format or you do not have the latest photo viewer" I've google it work on my phone but all advice given prople click some options, it doesn't let me do this. Just before that happens I had clicked on "change the default settings for media or devices" in autoplay and had clicked on 'Reset all default settings' I don't know if that made it, but I can't do anything, any help would be great, I'm not very good with computers as you have probably guessed now! so could you explain how to fix this problem as simply as possible! Thank you
Hello
See if that helps you.
'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"
http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/
"When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.
Run the Mr.Fixit here or you can use the manual method it y to correct yourself
http://support.Microsoft.com/kb/950505/en-us
And also, read information please.
'Change the programs that Windows uses by default'
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
See you soon.
-
When you try to view the images get message 'com surrogate has stopped working ".
Original title: com surrogate has stopped working
When I try to view my pictures, after a visit some of them, I get an error saying "com surrogate has stopped working". I just bought my phone yesterday and today I tried to show them. I don't have nero or DIVx on my computer. How to solve this problem? I have a windows 7-64 bit
Hi SualehKH,
Check out the following link and check if it helps.
Maybe you are looking for
-
Satellite A660 - Question about hidden partition
Recently my shore hardd crashed and he had to be replaced. Then, I used my recovery media to restore. But now when I go into Disk Management displays 3 partitions. (previously it was 2 I think - in the old HDD) DISK 0 Partition-1 1.46 GB Active recov
-
Bad SD card format has been reported on Satellite P200 - Vista 32 bit
The player card on my laptop seems to have stopped working. I checked the Device Manager and there is no warning in there. I reinstalled the Flashmedia driver just to be sure and rebooted but still no joy. The map seems to be recognized to some exten
-
Why the Autorun does not WORK? AutoPlay can be disabled? If so how can it be turned back on?
-
Security updates fail to load, but continue to ask Permission
To: Community of Microsoft FROM: Michael Dale Smith, Statesboro, GA RE: security updates fail to load, but continue to ask Permission DATE: 4 April 2014 1 security updates for Windows Vista and the defender could not load last month. Thus, every day
-
After awakening, when I still work online I get box to "Diagnose connection problems", click on it and I get three options. 1. ' autmatcally get a new IP address for the network card. Connection to the local network 2. a problem with your modem route