RAID / storage rebuild... asking to clarify for all ;)

Similar Questions

• Is have RAID (1 + 0) so that Failgroups for all ASM ASM starts is a well-known best practice?

  Dear Experts,

  Is have RAID (1 + 0) so that Failgroups for all ASM ASM starts is a well-known best practice?

  Having both is the best practice

  • RAID (1 + 0)
  • ASM Failgroups for all ASM starts

  Thank you

  IVW

  You can create groups of ASM disks with normal or high redundancy or specify external redundancy. It depends on your reliability requirements and storage performance. Remember that ASM is not RAID and redundancy is the base file. ASM uses alternating devices. Oracle is generally recommended to have redundancy of storage. If you have RAID redundancy at the level of hardware controller or storage, Oracle recommends to configure ASM disks with external redundancy groups. Redundancy of the DSO is only between groups of disk failure and by default, each device's own failure group. Of course, you always want to make sure that you do not rely on redundancy of data between logical devices or partitions residing on a single physical unit. Compared to external RAID redundancy redundancy ASM using will give the DBA more control and transparency on the setting of the underlying.

• For CS6, is there an easier way to redirect all my files and folders for all programs?

  Hey people adobe, Im wondering, I know you can configure each preference individually, but I want to redirect all caught space, storage of brushes and etc for all my programs in an another disc as volume change c / e /. Is there a way to do this with a program to make it easier? I don't want to accidentally delete files that are not all adobe programs.

  The reason is I don't want anything else then store programs on the SSD, and theoretically, I want the other disk, so it can run faster.

  There is no global option for this.

  Mylenium

• Restore will not ask for ALL my backup set.

  Had to replace a failing hard drive.  The whole process of installation and update of all my software went seamlessly.  Restore my PERSONAL files, however, has been a nightmare.

  I have a set of 3 backup disks (each successive), but has asked only the FIRST restore disc and then (VERY briefly) used the other.

  Unfortunately, not all the files that he handed in my hard drive are the latest versions, and some of my files are still missing.

  QUESTION: How can I force restore to call for ALL 3 of the consecutive backup drives before he leaves?

  I've been at this for hours, and I got it about.   GRRRR.

  Hello

  1. the restore process hang or fail?
  2. do you get an error message?

  We cannot force all disks to restore both. The backup and restore only will guide you to complete the restore process.
   
  For more information on "back up and restore: frequently asked questions" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks

  Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).

  There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.

  It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".

  System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.

  Kind regards

  Lorin Boyack

  Hello Lorin,

  There are several reasons why the built-in Defragmenter may not work correctly:

  Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3: The disc is damaged and must be repaired. Solution:

  a. open "Computer" and right-click on the drive that you want to disable frag.

  b. Select 'Properties' and click on 'tools '.

  c. Select "Check now" to check the drive for errors.

  d. Select the two options and click on 'start '.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

   

  Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Numbers: trying to AutoFill for all dates the three weeks

  Numbers: You're Auto Fill dates for all three weeks?   Unable to do so... any suggestions... Thank you...

  Here's my proposal on what you ask for:

  

  Make sure that the table has 22 ranks as indicated.

  Enter the start date in cell E1

  A2 = 1 + INT ((ROW () −2) ÷7)

  It's shorthand dethrone select cell A2, and then type (or copy and paste it here) the formula:

  = 1 + INT ((ROW () −2) ÷7)

  B2 = MOD (ROW () −2, 7) + 1

  C2 = E1 + (−2) LINE

  Select cells A2 through C2, copy

  Select cells A2 at the end of the C column, paste

• How can I solve this problem: ' Mail delivery failed: message back to the sender "for all recipients of my hotmail (outlook)

  Hello

  I get this email for all my "hotmail.com" recipients (outlook) when you try to send an e-mail to one of them that I had also for a front "msn.com" recipient:

  "This message was created automatically by mail delivery software.
  A message you sent could not be delivered to one or more of its
  beneficiaries. This is a permanent error. Failure of the following addresses:...
  host mx1.hotmail.com [65.55.37.72]
  Error SMTP from remote mail server after MAIL FROM: < [email protected] > SIZE = 8292:
  550 SC-001 (COL004-MC1F10) Unfortunately, the 198.1.119.134 messages have not been sent. As part of their network is on our list, please contact your Internet service provider. You can also consult your http://mail.live.com/mail/troubleshooting.aspx#errorsprovider. »

  Is there something I can do?

  Thank you very much for your help,

  Julie

  As more than first level help desk people, they are idiots! They are lucky to know enough to pick up the phone if it makes a noise.

  If their network or range of IP addresses is blacklisted only they can fix.
  I would ask to have this comeback for someone who knows something.

  It is not your problem, and there is nothing to fix on your computer.

• Why have I been asked and respected for download 39.0 at least 7 times. My version is still 38.0.5

  Why have I been asked and respected for download 39.0 at least 7 times. My version is 38.0.5
  It does not appear to update.
  In addition, why in the last twelve months lost my cursor when I am in half top of the screen. I went to Apple. The problem only occurs in my Firefox browser.
  Dedicated Firefox user
  Hugs, bad
  Malcolm Mckay

  If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

  Download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 39.0: https://www.mozilla.org/en-US/firefox/all/
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install or update Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Stop asking save passwords for NEW sites, still keep filling passwords for sites ALREADY SAVED

  So here's my problem. I have a handful of site where I leave FF save/fill in my password and user name information. For these sites, I WANT FF for save and continue to fill my login information. However, I do not want FF to save my credentials for ANY OTHER SITE.

  Now while I have my login information stored in FF for these websites, if I disable "Remember passwords for sites" in Security Options, FF continues to fill my login information for these sites (despite the fact that it has always recorded info). Once I re - check this option, FF starts to fill in my password again.

  AFAIK, disabling of "do not forget passwords for sites" is the only way to get FF to stop asking me if I want to have save my password, but if I do that it will also stop filling the passwords that I've saved.

  So, is there a way either:
  (A) have "Passwords sites Remember" disabled, but that FF inserts passwords I already saved it, or
  (B) have 'passwords to Remember sites"enabled, but STOP asking me to save passwords for all new Web sites?

  I want to ONLY FF to register AND fill the passwords that I've saved. I don't want to be prompted to save passwords for all new sites either.

  Is this possible? Maybe an add-on or about: config setting I could change?

  Thanks in advance!

  https://support.Mozilla.org/en-us/KB/password-manager-remember-delete-change-passwords

  In the password prompt to remember:
  2nd bulleted item - this choice is offered
  "To say don't remember usernames and passwords for the current site of Firefox, click the menu drop down and select never save password for this Site." In the future, when you log on the website you will not be invited to record the user name and password. »

• Docking station by default for all users

  I would like to create a default dock that all users will have when they connect.

  So far on the administrator account, I installed the dock how I want it to look.

  I copied the \Library\Preferences\com.apple.dock.plist file, and then paste it in the system\library\User / Template\English.lproj file.

  This doesn't seem to work.

  I also tried to stick in system\library\User / Template\English.lproj\Library\Preferences

  That did not work.

  I also tried to stick in system\library\User / Template\English.lproj\Library\Application/ Support

  This no longer works.

  Any ideas?

  I remind you that you are on a UNIX machine and not Windoze. Stop putting human oblique zigzag in your paths - they lean forward under macOS. A slash (as you'll see below) is used to escape white space in a path name.

  In your local account, configure the applications you want for all users (including system preferences: Dock settings) in your Dock. Then apply the following copy command in the Terminal of your home directory (you will be asked your admin password).

  sudo cp ~/Library/Preferences/com.apple.dock.plist Template/English.lproj/Library/Preferences system/library/User\

• How to get an extension of the dictionary for all users in a Citrix environment?

  Hi all

  Under title, I'm looking for a way to get out a dictionary of Firefox (specifically the English (British) of https://addons.mozilla.org/en-US/firefox/language-tools/) to all users in a Citrix environment. Comprehensive silent installation is absolutely best. Because following a recent installation of Firefox users report that this spell check is not working, what appears as a result there is no dictionary to check the spelling on the facility.

  It's in a corporate environment, running 6.5 XenApp hosted workstations to multi-server Windows 2008 R2 Enterprise x 64, the installed Firefox info below as collected by the add-on troubleshooting pulled from the browser in the test environment with the same characteristics.

  So far, I have tried what follows from this link: http://kb.mozillazine.org/Installing_extensions

  "A whole installation will install an extension in the directory of the application rather than in a profile so it will be available to all users. To perform a whole installation, you must not activate as within your Mozilla application installation file. Instead, download and save this record and make sure you close the application completely.

  Then follow one of the following options:

     Copy the .xpi file into the <installation directory>\extensions folder. When you start your Mozilla application again, it displays an installation dialog, asking "The following items were found in your Extensions folder. Do you want to install them?" "
  

  Although it seems that the < installation directory > \extensions folder no longer exists at the given location. Find a path of the < installation directory > \browser\extensions but seems it does not behave as said here that I have not received all of the guests. I hope that this method is still applicable in some way and I am just not aware of how this is currently supposed to be handled, but not sure if it is a dictionary rather than a typical add-on will have no effect on the installation overall how can be reached.

  Have also tried to http://forums.anandtech.com/showthread.php?t=2268437 , which seems a pretty basic option, but this would have not only to a lot of work to do on a per user basis, but there are also restrictions in place to prevent access to the records of users AppData.

  Finally I was looking https://support.mozilla.org/en-US/questions/740545 to push this point across: the les parametres parameters configuration, then use the method above to enforce this on the user end, but did not find anything me.

  Any help/advice/shots of elbow in the right direction would be greatly appreciated.

  It might be easier to extract the files of two dictionary (.dic and .aff) of archive XPI (ZIP) and place the two files in the folder of Firefox profile for the dictionaries available for all users.

• Storage of certain values, but not all

  Hi all

  I had trouble putting implement this: store a few values of some iterations of the loop as reference and use the reference to subtract any new value produced of the iterations of the loop later.

  For example:

  My sensor generates a table (size: 768) by timed loop iteration.

  I want to generate an array of background reference to iteration to iteration #220 #201. Currently I use the stacked shift (shift 20 saved stack) register to store the array generated by my sensor. The final basic table is averaged over 20 registees shift tables:

  Background reference table = (array array 1 + 2 +.. .array 20) / 20

  I want to remove this reference table background of table all collected subsequently the.

  new table - (table table 1 + 2 +.. .array 20) / 20

  The new table can by any array to a later iteration of the timed loop (#221 or beyond).

  In other words, I can't generate a table of fixed reference to normalize the data in real time, I've gotten. And the fixed reference table is harvested in the same channel that data in real time.

  How can I do this? (I tried the case structure over the stacked shift register, but it does not work...)

  Thank you!

  What you want to do is not clear.  Tell me if that's what you want to do:

  • Each iteration, get 768 points in a table "sample".
  • Throw sample 1 to 200 bays.
  • Calculate the average of berries sample of 201 to 220.  Call this average table of sample.
  • For all the "future" sample bays (what you want), record the Array - table of average sample sample.

  Is this correct?  If so, your algorithm can be expressed as a loop While (each loop Gets the data in a table in the sample) within which there is a Case statement to which is connected the index of the loop ('i').  If you increment 'i' before you wire this switch of case, the entries of your case will vary from 1... However, many samples you take, what makes easier "metering".

  Create the following cases:

  • .. 200 (which means that it is<= 200).=""  this="" is="" the="" "do="" nothing"="" case="" where="" you="" throw="" the="" data="">
  • 201, 219. It's "amounts Accumulate in the bays of the sample in a shift (initialization of the registry to an empty array) register.
  • 220 add the final sample, divide by 20 and save (in the same shift register) as average sample table.
  • 221... take your sample matrix, subtract table of average sample (of the shift register) and do what you want to do with your referenced sample.

  If it's your algorithm, it is very simple to implement (as you can see).  If you want to do something else, you will need to tell us specifically what you want to do, but maybe with the description I provided only, you might be able to understand for yourself how vary the algorithm.  If you're still stuck, clarify what you have tried (this is very useful if you attach your code, which means a VI (not an image, please, if this is an 'executable image', as will us want to try it and it ourselves).)  Among other things, the ambiguity in the description of Word of the algorithms are usually easier to understand by looking at the code.

  Bob Schor

• What is the command of shortcut for all windows get the information from the computer?

  What is the command of shortcut for all windows get the information from the computer?

  instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...

  just a command for windows xp, vista, 7 for system looking for information....

  original title: what is the SHORTCUT COMMAND to get information from the computer system?

  Hello BlackSecret,

  The keyboard shortcut to get to the top of this information is Windows key + break Attn.
  
  
  Who does what you ask?

• I bought my new laptop exactly a month before Windows 7 was released and standard for all new laptops. Am I entitled to upgrade to Windows 7 for free or at least some discount? __

  I bought my new laptop exactly a month before Windows 7 was released and standard for all new laptops. Can I upgrade to Windows 7 for free, or at least some discount?

  Thanks in advance,
  Donat

  Contact the manufacturer or ask in this forum instead: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Apply the change of power for all users

  Is there a way to change a system to XP for all THE present and future users on PC Windows XP sp2? It is in a domain environment, but I have not met all GPO settings that would allow it to be. And users are not technically aware of how to make these changes on their own. Basically, I just need to show up or off in standby mode.

  Any ideas are appreciated

  Hi Berlan,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please ask your question in the Forums in TechNet Windows Server.