RALink 3290 802.11bgn adapter Wi-Fi-speed slow

Similar Questions

• RALink RT3290 802.11bgn adapter Wi - Fi doesn't work does not correctly

  I bought a HP Pavilion TouchSmart with Ralink RT3290 802.11bgn Wi - Fi adapter. Everything worked fine until I can't say when it started really, I've had a few problems with my WiFi connection. I'm not really sure, but I have the feeling that it has been getting worse over time. Suddenly, the internet connection is lost. Troubleshooting gives me different results, most of the time that it is "the default gateway is not available." Sometimes it is fixed, sometimes not. I looked online, what could be the problem. Then I opened my device manager and checked the network card, unchecked "allow the computer to turn off this device...". ", but that did not help. Once the power management tab was not yet available. Sometimes, the card is disabled. Do not know why. Sometimes I can turn it on just by clicking on activate. This average doen't, that I have no internet, only that the adapter is enabled. Sometimes she even let me enable it.

  - And he dropped my internet connection again!

  Troubleshooting: 'the default gateway is not available"- fixed

  I've updated the WiFi card to the 5.0.37.0 version. Does not solve the problem.
  Sometimes my computer tells me that there are no available connections. But I know that there are plenty around.

  Someone help me please! I'm desperate!

  Thank you.

  Silke

  I think that my problem has never been with the WiFi adapter. A month ago, I went to Comcast (with 105 MB/s) to AT & T (with 18 Mbit/s). Since then, I didn't at all connectivity issues. And as incredible as it may seem my internet speed is the same, since the speed of Comcast almost never reached above 20 Mbps. If I would have known that sooner! Would have saved me hours or even days with internet connectivity and problems on the phone with the Comcast people!

  Thanks to everyone for their help and advice. Maybe my information can help others with the same questions.

• RALink RT3290 802.11bgn Wi - Fi adapter will not connect to 802.11 g, windows 8

  Hi eeveryone,.

  Some can help me!

  I bought a new laptop HP Pavilion g7. Ralink RT3290 802.11bgn Wi - Fi adapter I but my problem is that I can only connect to the network 802.11 n and I can't use wifi 802.11 g. When I try to connect wifi 802.11 g it says limited is unable to download a Web page, but should I use with this adapter Ralink 802.11 bgn Yes?

  I've already updated the wireless card but did not help I have disabled all firewall and antivirus software and I have already written here manually the IP address, netmask etc... I got the software window 8.

  But the funny thing is with my old laptop which has windows 7 that I can connect without any problem WiFi 802.11 g!

  I would use 802.11 g, because the signal is stronger than 802.11 n. I hope I can receive the signal of network wifi 802.11 g somehow.

  Thanks for your answer in advance!

  maybe try to reinstall windows and check how it works without installed programs

  You can also restore your windows settings to check

• RALink RT5390R 802.11bgn Wi - Fi adapter

  How can I reinstall the Ralink wireless driver-Ralink RT5390R 802.11bgn Wi - Fi adapter

  Hello:

  Here is the link to the latest wireless driver for this card...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_131223_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Click the tab Installation Instructions to know how to install the driver.

• RALink RT3290 802.11bgn Wi - Fi adapter detects no wifi

  I use HP PAVILION 15-E015TX. I have reset my windows 8 OS recently due to a corruption of the data. After the reset of the operating system, everything is reinstalled to its original state. But the Ralink RT3290 802.11bgn Wi - Fi adapter does not detect the wifi is working normally before you reset the operating system. When I run the HP SUPPORT ASSISTANT troubleshooting option, it shows a red mark when you reset the adapter.

  I want to know how I can solve this problem.

  sat_m,

  Welcome to the HP Forum.

  Before you make any changes, make sure you have a recent restore Point / new created:

  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8
  • Have you tried installing the driver from the Web page of your computer?

  Version (in writing): 5.0.37.0

  Date: 2013-12-23

  HP 15-e015tx - Ralink 802.11 b/g/n Wireless LAN Adapter Driver

  Make sure your Chipset driver is up-to-date - then install / update the Ralink driver.

  Take a look at the other drivers to confirm that they are at the level of the version you want.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• RALink RT5390R 802.11bgn Wi - Fi adapter has driver problems

  Hello friends, and HP

  Is no longer, I can connect to the internet via wi - fi.  In case of problems (by ethernet connection), I get the following error:

  The Ralink RT5390R 802.11bgn Wi - Fi adapter knows or material associated with the problem drivers...

  The computer is a HP Envy dv6t Quad laptop, Intel Core 2.4 GHz running Windows 8. (Bought 12/2002)

  Any help would be most appreciated.

  YAB

  Any of these will work:

  Atheros WiFi 802.11b/g/n, Bluetooth 4.0 adapter and 1 × 1 9485GN 3012 655795-001
  Atheros 802.11b/g/n adapter Bluetooth 675794-001 1 × 1 WB225
  Broadcom 4313GN 802.11b/g/n WiFi and Bluetooth 20702 4.0 1 × 1
  Adapter combo 657325-001
  Module Intel Centrino Advanced-N 6230 WLAN 670691-001

  The manual is incorrect because the part number for the Centrino card is actually the Ralink card:

  http://www.eBay.com/ITM/genuine-HP-DV6-7000-DV6-7020us-Wireless-N-WiFi-card-670691-001-RT5390-/181378596498?PT=US_Internal_Network_Cards&hash=item2a3b01be92

  The eBay link should be an exact replacement for your. Here is the Service Manual:

  Manual

  See Page 52

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• laptop HP pavilion g6: ralink rt3290 802.11bgn wi - fi adapter problem does not not when turn on pc

  Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it

  Hi @eswar_krishna,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• MediaTek MT7630E 802.11bgn adapter Wi - Fi does not work in 802.11n mode (mode-N), only G-mode

  A few days ago, I got a new notebook HP ProBook 430 G1. OS: Windows 8.1

  They have Mediatek MT7630E 802.11bgn Wi - Fi adapter inside.

  Problem: I found this wireless adapter does not work in 802.11n mode (mode-N), but works well as in G-mode.

  Some modifications in the parameters of the driver on the Advanced tab are problem solved.

  I think it's a bug of material, or (less maybe) a bug in the driver.

  In other forums, I heard that HP can replace the card wireless, which works well. Is it not?

  You misunderstood me. I meant, of course, all channels from 1 to 13.

  I solved the problem by unistalling completely all the WiFi and software of the device with its drivers from Control Panel.

  Then downloaded latest drivers from site oficial Mediatek.

  In the Advanced tab of the new driver settings option appeared - "802.11n direct mode.

  After you enable this mode WiFi started working in mode N well.

• HP Pavilion 2336el g6 and Ralink RT5390R 802.11bgn Wi - Fi adapter

  I recently bought this laptop which came with Windows 8, since I hated this OS I he wiped and installed Windows 7 64-bit.

  I installed all necessary drivers directly from manufacturers having recovered components via PCI VEN_ID and DEV_ID specifications. Everything is installed correctly. But the wireless adapter gives me problems, namely: the login silently removes all the minutes.

  The laptop is really close to my router which is just under my desk and I still see 5 bars of signal strength. My router uses 802. 11 b the Protocol.

  I tried to change between static IP and DHCP assigned, change the transmission channel router, disable mode "n" on the wireless card, reinstall the drivers, by disabling NetBIOS services. Nothing seems to solve the problem.

  The drivers I use come from here:

  http://www.MediaTek.com/_en/07_downloads/01_windows.php

  I noticed an update of Windows on the right wireless adapter came through this morning: now the driver version is 5.0.9.0 and the connection seems stable: it worked for a few hours now. It seems rather strange that pilot the window is no longer updated driver from the manufacturer...

  EDIT 28/05/2013: this update seems to have solved the problem. No other problems. Very stable connection even from a distance.

• RALink RT3290 802.11bgn Wi - Fi adapter issue

  
  

  Hello:

  See if the latest driver directly from Mediatek works better.

  These cards have major connection problems, so if the new driver does not help, I don't know about all other things you can do differently to get a different brand wireless card listed in the service manual for your laptop.  And if there is one, must also have the part number HP on it or it won't work.

  PCIe (RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)

  15/04/2014

  V5.0.46.0

  Win7 32/64 Win8 32/64 Win8.1 32/64

• RALink RT3290 802.11bgn Wi - Fi adapter will not connect to 802.11 g, windows 8.1

  Hello

  I'm not familiar with the forum. Hoping I can get any help

  Last week I boght a HP ENVY 15-j040el
  S/N [deleted serial number for personal protection to prevent others from using SN for filing fraudulent claims guarantee]
  Product number: E4N80EA

  Since the beginning, I noticed without wire did not detect signal of 5G of my router, but I was so anxious to perform the installation to the end

  Unfortunately, nothing has changed. I tried:

  -upgrade to 8.1 Windows

  -upgrade to 5.0.37.0 (25.11.13) RT3290 wireless network card driver

  I wonder if I should configure the parameters of the advance of the RT3290 driver

  Thanks in advance

  You are the very welcome, Sergio.

  I am a consumer like you and do not work for HP, if unfortunately, I do not know what model wireless cards HP installs in their notebooks.

  I agree with you, however, that 5.0 GHz has been around for centuries now, and it is high time that HP installs a better dual band $10 card.

  I'm sure that people would be happy to pay the extra price.

  My understanding is that HP may have removed the white list of BIOS to immobilize the wireless cards are not not in manual work, so you can experiment and see if you can install a dual band card in your notebook.

  No guarantee that it will work, but a year ago, I would have told you that it was impossible.

  See this thread.

  http://h30434.www3.HP.com/T5/notebook-hardware/HP-17-e016dx-WLAN-upgrade/m-p/3383443#M116640

  Best regards

  Paul

  P.S.: If you decide to take a chance on another wireless card, please let us know if it worked for you.

• RALink rt5390r 802.11bgn wifi not detected

  I have HP Envy M6 1225 dx. Ralink wifi driver bundled with it served me well up to a year. But now I'm not because of the update of windows or something else, I'm having a problem with him. Sometimes, the pilot works well, but most and most of the time, windows no problem with the driver. It, or mentions "problem driver or hardware ' while I troubleshoot it, or sometimes it does even not detect the device in Device Manager. I even tried to reinstall the driver by the driver that I have provided with the laptop bt the same problem persists. I would like to know if the updates of windows it is disturbing because once I had found the update of the driver Ralink wifi on the windows update list that had created the problem and I uninstalled it. Now I can't find this driver update in the list of windows updates. Please help me!

  Hello Sabrina,

  Welcome to the HP Forums!

  I understand that your wireless adapter does not work correctly. Just to clarify, can you tell me if you have deleted the Windows update that you believe has problem?

  Try to install the drivers for the wireless card: Mediatek 802.11 Wireless LAN Adapter Driver

  You can also try to do a restore system before the issue started. You can access the system restore in HP Recovery Manager by repeatedly tapping the F11 key, while the portable lights.

  Let me know if it works for you!

• Pavilion G6 2212sa: ralink RT5390R 802.11bgn

  Hello

  My main problem is that I am registered for 100MB internet connection and I can read only 30 MB it wireless. Cable made full speed correctly the problem is in my camera.

  I tried to read the forum on the wifi adapter and its problems and noticed that others have the same problem.

  As I understand it it is true that the adapter is not capable for high-speed internet.

  Could you tell me what other cards I can get into my laptop which would certainly manage the 100 MB?

  I look forward to hearing from you.

  No problem @lsdigiti

  This one looks good.

  http://www.eBay.co.UK/ITM/HP-Pavilion-M6-1000-TouchSmart-15-WiFi-Wireless-N-2230-card-2230BNHMW-670290-001-/171333306255?hash=item27e442c78f:g:TPYAAOxyNThTd7RV

  And this one.

  http://www.eBay.co.UK/ITM/670290-001-genuine-original-HP-wireless-Bluetooth-TOUCHSMART-M7-J-Series-/291438859186?hash=item43db1c13b2:g:HD4AAOSwpDdVNYDM

  REO

• Want M4: Please help - problem with Ralink RT5390 802.11b/g/n WiFi Adapter

  OK so I've had this laptop for a while and it has been great until today. I'm unable to connect to wireless internet. After reading around online for a quick solution (which I didn't), I have this to offer... I have a ralink RT5390R 802.11bgn wi - fi adapter. The drivers are up to date and the status of the device is:

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  What can / should I do? Help, please!

  -Chris

  Hello @CBrustas,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are not able to connect to your wireless network, and that an error code is displayed. I'd be happy to help you!

  To clear the error about your wireless adapter, I advise you to follow the steps described in this document on difficulty: "this device cannot start" error Code 10 in the Device Manager in Windows.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Update the offsets of wifi driver WiFi Ralink 802.11 adapter problem b/g/n after Windows 8

  Hello

  I recently experience this terrible problem with my Wifi, everything used to work fine until a recent Windows 8 update (I don't remember which exactly) because I thought that the problem is related to my antivirus or I need to reinstall my windows because its gets lag

  The problem is that the Dungeon of Wifi that come and go, which causes terrible lag and crashes when I try to play games online such as Dota2 or other

  Please check this picture: http://i.imgur.com/U0Ns0Yw.png

  the photo shows the behavior of the Wifi during an online game, it continues to go up, then down to ZERO (here when he lags behind in the game) then reassemble and so on

  I tried several versions of the driver already installed later did nothing, installed the older... still nothing works.

  Notes:

  -the problem is not due to my router, I checked with my other PC and it work perfectly without delay whether

  -my laptop is a HP Pavilion 2212ek g6

  -Currently, I installed the latest version of Ralink 802.11 b/g/n WiFi adapt Driver 2013-04-27, Version5.0.25.0

  -My wireless card is: Ralink RT3290 802.11bgn wifi adapter

  anyone with the same problem as me? anything to solve this problem? Help, please!

  Thank you very much

  Hello

  I think that I sloved the problem, after a morning of messing around with drivers and reboots

  the trick is to go to the

  1 - Control Panel

  2 - Click on hardware and sound

  3. in the devices and printers click on 'Device Manager '.

  4. in the "Device Manager" click on "network adapters" then right-click on the ralink 802.1bgn wireless adapter, then click 'properties '.

  5 - go to advanced

  6 choose the sensitivity of homelessness

  7 - change the Disable value

  that worked for me, hopefully it do the same for you