Want M4: Please help - problem with Ralink RT5390 802.11b/g/n WiFi Adapter

Similar Questions

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul

• Problem with Atheros AR9285 802.11b/g/n WiFi adapt

  I changed some drivers and suddenly removed my old driver for the wireless card. So I found a new one on the HP site, to install it then. But my laptop cannot see all wi - fi networks and when I use Windows solve it is said there is a problem with the driver for the adapter Wi - fi but cannot fix it. I tried different versions of this driver, but nothing has changed. My laptop is pavilion dv6-3020tx.

  Hello:

  You did anything I would have done. I wonder if it's a hardware problem?

  If you back up your files and perform a recovery system to the factory settings?

  It would be the only thing left to try I can think of.

  Paul

• Pavilion dv6-6121tx: driver Ralink upgrade rt5390 802.11b/g/n wifi adapter with Intel Dual Band Wireless-AC 7260

  Hey guys,.

  Currently, I have the HP Pavilion dv6-6121tx Entertainment Notebook PC with the configuration below.

  Name: HP Pavilion dv6 Notebook PC
  OS: WIN 7 Home Premium 64-bit
  Processor: Interl (R) Core i7-2630QM CPU @ 2.00GHz
  RAM: 6 GB DDR3
  Graphics card: Radeon (TM) HD 6770 M 2 GB DDR5

  My laptop has a Ralink rt5390 802.11b/g/n wifi adapter driver and I want to spend with Intel Dual Band Wireless-AC 7260. I went through the below URL containing all compatible drivers. But I am not able to understand where the AC7260 from Intel is supported or not.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-6100-entertainment-notebook-PC-serie...

  Anyone of you can guide me on this please. Thank you.

  Hello @Amjadbrsc,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about WiFi drivers and wanted to help!

  All the network drivers compatible for your product is listed under the tab Driver Network , the customer support of HP - page Software and Driver Downloads.

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great weekend!

• HP Pavilion dv6-3134tx: driver Ralink RT3090 802.11b/g/n Wifi adapter windows 10 (who need)

  If, after doing some research intense and other things, I managed solve all the problems, but the wireless driver. According to my other post (I couldn't connect to a network at all). Now, I can not, because the physical address "collided with one, another".  I googled and it said that my driver was bad, it was the cause. So I uninstalled all drivers and one coming from the PC default is version 5.0.48 and I heard, you can get a + 5.0.50 which was designed specifically for windods 10. However, I can't come across a driver for windows 10 there are only 8/win7 and I've tried them all (literally) and still no luck. At least now, when I tried to connect with the drivers, my adapter didn't disable and re - activate itself.

  Need help as soon as possible.

  Thanks for reading and I hope someone can help me

  See you soon,.
  Ahmed

  You are the very welcome.

  Unfortunately, I do not know what you need to do to make this opinion go.

• Qualcomm, atheros AR9285 802.11b/g/n wifi adapter problem

  Hi, if I can connect to the internet, but after a bit, I'm disconnected from the network. When I have the Troubleshoot, it indicates that there is a problem with my card. It is not a problem with my network as all other devices work correctly.

  I use Windows 8; my laptop is a Pavilion dv6 - 3284ca; my wifi adapter is qualcomm, atheros AR9285 802.11b/g/n wifi adapt

  Let me know if you need more information.

  You can try a USB wireless adapter. If it works, which will restrict the cause root. If it doesn't, it will restrict the issue to a conclusion. There is not a lot of troubleshooting on the left that you don't want to, so I think that an adapter is a good idea.

  Mario

• Please HELP * problem with dynamic regions ADF...

  Hello
  
  I have 2 separate workflow in my application. 'Search-user-flow' & 'create-user-flow. I got to view these feeds in my main application (home) as a dynamic region with 2 dynamic links.
  
  My page main split into two panels where I suppose to display dynamic links on the left side and the workflow right. Want to display the default search feeds loading the home page, and when I click on the link for the user to create, create flow must be exposed to the right side. Please help me how to do the same. I was halfway through the path, but not totally.
  
  Here's what I've done so far.
  
  Step 1) creation research-user-flow (this stream were only page fragments not pages)
  Step 2) created create-user-flow (this stream were only page fragments not pages)
  Step 3) slide / move the search-user-flow in right panel of the main page as dynamic and created new "searchFlow" managed bean and the same card.
  -(After this stage, the main research stream fragment appears in my main page)
  -(Managed bean created taskID entry and the method)
  
  Step 4) slide / move the create-user-flow to the left side panel as dynamic link.
  Step 5) slide / move in the research-user-flow for left side panel as dynamic link.
  
  During the loading of my main page, I could see 2 dynamic links in the Panel left side and 1 flow to the right side panel. Now when I click on the Create User link, it's pass the stream and display the stream of the 2nd on the right. So far so good. Now, if I hit any link here after an error. Please help me how to solve this problem and make the works of dynamic region. It is really urgent and fight with past 4 days...
  
  Thank you
  klogube

  Hello

  define the scope of the bean managed bean that passes the workflow to a wider scope than requestScope: viewScope, pageFlowScope...

  Frank

• Please help, problem with the creation of PDF

  Please help me, this message keeps showing on the 3rd page of a PDF document I have to build:

  Please wait... If this message is not subsequently replaced by the good content of the document, your PDF reader isn't able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Linux® or Mac by visiting http://www.adobe.com/go/reader_download. For more assistance with Adobe Reader, please visit http://www.adobe.com/go/acrreader.

  Adobe reader is already up to date

  It sounds like it may be related to create forms in LiveCycle. Here is another discussion on the issue of the forum LiveCycle error: "If this message is not finally replaced by appropriate... content." »

• Problem with Atheros AR5007 802. 11 b / g adapter on HP Vista laptop

  I recently bought a Linksys E2000 router. He immediately hung on my Wired desktop in Vista and a laptop running Windows XP.  However, he had a problem onto HP laptop my wife running Vista. It wouldn't let me connect as a secure binding, but let me just connect as a guest with limited functionality account. Linksys, I called and they informed me that the Atheros AR5007 802. 11 b / g wifi adapter had problems of compatibility with the Linksys E2000 and suggested to update with the new drivers. I searched online but a new driver is not found.  Any help would be greatly appreciated.

  Thank you
  Mark

  Hi mark, Yes, download and run the file. It should automatically install the drivers. I hope they will fix the problem you are experiencing. Paul

• Please HELP - problem with 2 fixed column of the model Dreamweaver CS3

  I am creating a website using the 2 column fixed, no sidebar, header and footer template html in Dreamweaver CS3.  I tried to put a photo in the right side bar as well as in the part main content or to the left of the page, and no image is displayed when I view it in any of the browsers I use.

  I did some only minor changes in the colors and sizes, but other than that, no other changes.  The pic that I put in the header appears perfectly fine.

  Any help or advice for this problem would be greatly appreciated.

  Thank you!!

  I'd like to help you too.  But we do not have enough information about the structure of your site.

  Can you please download this page of test and images on a web server space and post a link?

  Otherwise, it could be that your images were not optimized for the web (jpg RGB)?  In Photoshop, click on save for Web...

  Or it may be a problem of the link path

  Change this:

  

  to do this:

  

  or this:

  

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• BlackBerry Smartphones Please help - problem with blackberry curve 8520

  My fone doesn't let me edit or add new contacts, except if I add to my sim card then copy it on my blackberry. Its a new need that I noticed last night and I don't know what to do? I tried to remove the battery, and replacement but it did not work!

  Please remove Windows Live Messenger or Yahoo! Messenger for now until a new update was released because one of these apps version recently update is causing the problem for most OS5 phones...

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Why are publish you again? You must first answer the question I ask in your original thread.

• This question is about programming in C. you please help me with a question that is.

  This question is about programming in c. can you please help me with an issue that is -

  Why do we write - printf ("r = c = %d %d sum = %d\n", sum c, r,);

  What we're trying to accomplish here by writing this.

  I also wanted to know why we write things within double quotes.

  The book programming in C I have, gave no information on this subject.

  The way if statements can be nested, of same whiles and fors can

  also be nested. To understand the nested loops how to work, watch the

  program below:

  / * Demonstration of nested loops * /.

  (main)

  {

  int sum c, r,

  for (r = 1; r<= 3="" ;="" r++="" )="" outer="" loop="">

  {

  for (c = 1; c<= 2="" ;="" c++="" )="" inner="" loop="">

  {

  sum = r + c;

  printf ("r = c = %d %d sum = %d\n", sum c, r,);

  }

  }

  }

  When you run this program, you will get the following result:

  r = 1 c = 1 sum = 2

  r = 1 c = 2 sum = 3

  r = 2 c = 1 sum = 3

  r = 2 c = 2 sum = 4

  r = 3 c = 1 sum = 4

  r = 3 c = 2 sum = 5

  In short, in C, a string enclosed in double quotation marks is replaced by a pointer to character to this string somewhere in memory.  The first parameter of a call to printf() is a pointer to the format string and the following parameters replace the % {(quoi que) the characters that appear in the format string.}  %d represents a whole argument of printing.

  HTH,

  JW

• RALink RT5390 802.11/b/g/n WiFi adapter 5.0 ghz problem

  I have a laptop DV7 - 6113cl. It has a Ralink RT5390 802.11/b/g/n WiFi adapter and I can't connect to my wifi 5.0 ghz router. I can only connect to my 2.4 ghz router, the router is an Asus RT-N56U Dual Band router 802. 11 g/b/n /.

  The 2.4 ghz is 802. 11 g/b

  the 5.0 ghz is 802.11 n/a.

  Please help me, I need to connect to the 5.0 ghz because the 2.4 ghz signal is only 1 bar if im in my room.

  Ralink RT5390 is 2.4 GHz only.

  Try to move your router or by assigning a different channel.

  Banhien is only partially correct. While 802. 11A works on 5 GHz, you have reason to believe that 802.11n can do 2,4 or 5.