RAM ESX Server?

Similar Questions

• ESX Server 3.5 upgrade auf 4.1

  Hallo community values,

  ICH stehe vor einem is small problem und ich möchte euch einen overview binding kurz:

  • -2 x VMware ESX Server 3.5.0 build 130756 (Clustermode, Dell Poweredge M600, Xeon X 5460, 32 GB of RAM)
  • -12 VMs (Win2k3 + Win2k8)
  • -VMware Virtual Center Server 2.5.0.64228
  • -VMware Infrastructure Client 2.5.0.64228
  • -VMware Update Manager 1.0.0.63985

  Wie ihr an den Versionen seht, wurde das Szenario recht und ich darf nun hand dress is stiefmütterlich. Are das Ziel und meine Aufgabe ist, die sich infrastructure auf die aktuellste mógliche (ESX 4.1 ware dies laut ESX Compatibility Guide U3) zu heben. Planned do ware:

  • -Host ESX al auf ESX Server 3.5 Update 5
  • -Removal of guest VMs auf vCenter Server 4.1.0.17435 und der
  • -Update auf der hosts 4.1 U3
  • -Squad der VMware tools VMs auf den
  • -If necessary. Ein update the vCenters 5.5, muss ich mich noch inform ob possible ist dies auf mit den 4.1er hosts.

  Leider komme ich nicht sehr weit.

  Die Baseline as Update 5 is connected und ist mit dem Update Manager. Der ist im Wartungsmodus ESX host. Wenn ich "updates Auf prufen" go out ich das event "Fehler beim Prüfen von ESXHost auf updated" von dem Benutzer com.vmware.vcIntegrity.

  Die questions:

  WO ich hand dress should? Wo finde ich ein detailliertes journal zu den C.a.i.? There're zu der be possibly Tipps oder Anderungsvorschlage eurerseits do?

  Danke im Voraus.

  ICH sprach von Version 4.1 therefore, weil erwahnt oben the hattest "Das Ziel und meine Aufgabe ist es, die sich infrastructure auf die aktuellste mógliche (ESX Compatibility Guide ware ESX 4.1 U3 dies laut) zu heben". Durchgehend Wenn Version 5.1 (für die ESXi hosts, eingebaute Komponenten wie NW maps..., storage system) supported the ist, ist dies of course also possible. Die die aktuell probably VM mit HW Version 4 laufen should damit auch laufen (see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2007240)

  Die Lizenzkeys as ESX and ESXi sind die gleichen und wenn eine aktive subscription As (oder zum als vSphere covered at least 5 released wurde hattest) you can the uber das my VMware die auf die Version upgraden equivalent licenses portal.

  André

• VMWare ESX Server training

  Hello experts,
  I'm new to vitrualization.
  I installed vmware workastation v 7.0 and I also have VMWare ESX Server training Trainsignal dvd for training so here are my questions:

  Can I install VMware vSphere Hypervisor 3.5 on my VMWare Workstation 7.0 for training v?

  Is - this VMWare vSphere Hypervisor 3.5 product different from VMWare ESX Server 3.5?

  I'm you ask all these questions because I want to be sure I can complete a training with VMWare vSphere Hypervisor 3.5 suite drive of my Trainsignal VMWare ESX Server 3 and because I am not allowed to download the evaluation version on VMWare ESX Server 3 and because the VMWare customer service could not answer my simple question and quoted me to the community by them to get advice.

  Thanks in advance for your help and advice.

  Hi nasolsi,

  Can I install VMware vSphere Hypervisor 5 straight on my VMWare Workstation 7 training without affecting my HDD physical whole?

  Yes, it has nothing to do with your actual score and highlights form the part of space, he took from your partition to create the disk of the virtual machine. So basically it will eat the space in the physical partition but does nothing else like the formatting of the entire disk.
  

  
  

  and the performance on my PC?

  No, this will not affect your PC's performance as the workstation will run the pages of RAM and cycles on your physical PC hardware microprocessor.

  
  

  If permitted increase RAM by a value so that you do not encounter CMTF or any other problem. 2048MB is the minimum memory required to run ESXi.

• New ESX Server

  My company gives me a new server for my virtual environment.  I have 2 ESX server with 74 GB RAM each and the new server will have only 24 GB of RAM.  Is that going to cause a problem for my virtual environment?

  No, it will be all right, I have a configuration with 3 98Gigs servers and another with only 32 gigabytes, it gets just be allocated less machines due to the least amount of RAM.  Works very well.

• Withdrawal of an ESX Server processor

  We have an idea in our Department to remove a few processors of our ESX servers (they are just sitting around 8% use with 7-10 VMS on each one).

  I was wondering if someone has a licensed power off ESX Server and done this before. The pointers, advice?

  I see it like this big, they are licensed per processor , so if we take away a single processor and boot it upward it will see has 1 processor and then we can use the license to bring up another 1 CPU ESX host. Processors are 3.33 MHz quad cores so I think it can handle pretty much anything we through him (keeping exchange and sql machines on proc dual ESX host with a lot of RAM however).

  So there you have it, someone at - it ideas? I wanted to just post there and see what the consensus was in the community. Thank you!

  Your problem around removing a processor might be the memory.

  New multi core processors must sit with cards memory who speaks directly with the cpu because of the multiplicity of carrots and speeds.

  Remove so a processor could cause your boot box without removing the memory associated with the cpu.

  But registration and esx, point of view, if the box of boots it should work. Definitely something I've never done.

• Confused by the strategy of allocation of ram ESX virtual machines

  Hello

  I have a "MS SBS 2003 R2 premium" production virtual machine running on ESX 3.5.0 build 123630: VM has 4 GB of allocated RAM.

  On this virtual machine, all processes are running (IE exchange, sql server, antivirus, antispam, mail, archiving,... etc.) and some of them are performing badly (especially exchange and sql mail archiving database); While working on the optimization with the machine to a single application they analized the use of resources within SBS 2003 and told me that there is not enough RAM (only 300 M. By the way it seems to me that on an OS Server using a lot of free ram is a waste of resources, but it is another point...).

  Looking at the windows Task Manager (see attached screenshots) is confirmed, but control use of RAM for RAM usage average VM (with infrastructure VI client) is between 1 and 1.5 GB during working hours (09:00 - 20:00).

  I'm confused: If there are so many processes within the VM asking for memory, why ESX gives only a third of the RAM allocated to the VM? And as all the other 3 GB, are they paged to disk?

  Thanks in advance to help my understanding.

  Guido

  Don't forget the vmkernel activiely tries to save on the memory usage - the tool is Transparent PAge Sharing - ability to the vmkernel to identify identical memory pages and store it once read only memory - so you could very easily have guest o/s of the virtual machine showing that it is using 4 GB but the esx server is only show that vm use - less

  Now on your poor perfromance - what is the configuration of your server ESX - memory, CPU? How many virtual machines are hosted, and what are the respective configurastions - mem, # viretual UC? With a large file of the PAge check the performance graph and see how much memory ball is active, if any?

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Unable to virtualize the host esx Server quadcore AMD Barcelona B3

  I have a server with AMD Quad Core CPU Barcelona B3 32 GB of RAM. I installed ESX 4.0 update1 on it successfully. After that, I try to virtualize esx server on this server. I added the new virtual machine with a standard configuration. When I try to boot the cdrom ESX4.0 I get the error message shown in the attachment.

  I tried with esx 3.5 and 4. Same mistake.

  cpuinfo on the esx host recognizes that UC is B3.

  I would be grateful no work around for this work.

  Thanks in advance

  It seems that your host is in an EVC cluster configured for Opterons third generation.  VCA usurps the guest not to not CPUID settings for a 'lowest common denominator' CPU, which is, unfortunately, a B2.  Try to remove the EVC cluster host.

• ESX Server performance

  Hi all, first post on VM Community Council.

  I use the PC for about 2 years and I start looking to ESX server.

  One thing, I want to clarify the performance issue.

  This is a case that I got here:

  We have 3 Dell PowerEdge 2900 III with exactly the same hardware configuration:

  • 1 quad Core Intel® Xeon® E5450, 2x6MB Cache, 3.0 GHz, 1333 MHz FSB

  • 4 GB 667 MHz (4x1Go), DIMMs unique access

  • Windows 2003 Enterprise Server

  An application server

  Only one DB server

  A single server for 'other' purposes

  We need to reproduce the same configuration 3 times.

  So instead of buying new hardware, it would be realistic to install ESX server on each server and to create 3 VMs (with the same specifications of 'material' as their original conterpart) per server and still get a reasonable rate of return?

  As I said I'm not currently using ESX and I couldn't find a 'clear' answer to my question...

  If you need more information, please ask me... or don't hesitate to 'redirect' me to any specific post / thread / doc.

  Concerning

  Sébastien

  As mentioned above, I would look to increase the physical RAM in each of at least 8 GB.  RAM for these inexpensive boxes looks - £160 of Crucial for 8 GB, a bit more than Dell is no doubt.

  Also the RAID controller in each server must have cache battery backed on this subject, so that may need to add more.

  Please give points for any helpful answer.

• VMware ESX server CPU use test alarm

  Hi all

  For a new client, I need to show the alarm and ticket slot functionlity vmware ESX server logging settings

  • Use of the CPU of a server ESX VMW
  • Use of memory for the server ESX VMW

  While I reduced the threshold value of VMW ESX Server CPU use as beloow format

  WARNING - 5% and STDev.warning - 0

  I made this two days before configuration, but still no alarm generated for this rule.

  Help the creation of a test of the abveo metric ESX alarm

  Hi - I ended up having to do such things in the past as well. I just built a virtual machine added lots of processors and memory, then for the CPU, I used the script CPUBusy.vbs from VMware (Google search which) and down it load times so that he began to max real physical processors... For memory, I just opened a massive text file in Wordpad and scroll up and down it. This gave me the circumstances to test the alarms, just don't do as a busy time or use some dev ESX servers... Danny Bravo

• Command updating ESX Server 3i, 3.5.0 build #207095

  I have a server ESX 3i, 3.5.0 build from 207095 and I'm trying to update with the latest patch (ESXe350-201302401-O - SG.zip) which I copied to a folder on the local drive:

  "/ vmfs/volumes/OS-Datastore/Patches / '.

  I run the commands:

  «esxupdate install /vmfs/volumes/OS-Datastore/Patches/ESXe350-201302401-O-SG.zip b»

  ... as well as

  "esxupdate install /vmfs/volumes/OS-Datastore/Patches/ESXe350-201302401-O-SG.zip d.

  ... and it is for me to give a new prompt. That means that means and why I can't update my installation?

  I also extracted the original zip file and created these sub zip files:

  "ESXe350-201302401-I - SG.zip".

  "ESXe350-201302401-T - BG.zip" and

  "ESXe350-201302401-C - SG.zip.

  ... I tried the command on them as anything does not.

  How can I get this patch inistalled?

  What is the right syntax?

  Thanks P.A.!

  Your post led me to the answer here:

  VMware KB: Image of ESXi Server 3.5 June 2011 Rollup CD

  I missed an update and for this reason I have to do a clean install as shown in the link above.

  My version can't do any update or update more!

  What you need to know about the key Secure Update *.

  (

  ESXi Server 3.5 June 2011 Rollup CD image (2000593)

  This Installable CD contains ESX Secure Key Update ESXe350-201012401-I-BG.

  For more information about this fix, see Critical Impact: VMware ESXi 3.5, Patch ESXe350-201012401-I-BG: apply this hotfix to continue to apply patches on the ESXi 3.5 hosts after June 2011 (1030002).

  NOTE: If you have not applied this patch by June 1, 2011, you will not be able to then apply patches. To get your updated hosts up-to-date with ESX Server 3i 3.5 version is to apply this Installable CD as new installation. You can also switch to ESXi 4.0 Update 1 Installable.

  Thanks for your suggestions... at least it has led me to the answer.

  A clean install to come!

• How do you know what was the latest patch installed on VMware ESX Server 3i, 3.5.0 207095

  Hello guys,.

  I've been running an old server that was installed in a test system on workstation DELL - Optiplex GX620 (32 bit).

  During installation, I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE' as follows:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI' this is it worked and I used it for 3 years now. However, right now, I was hoping to be updated with the latest patches and updates and I do not know if I just ESX or ESXi, or what was my last update, and what it takes then.

  I used this command to get the following result:

  # vmware - v

  VMware ESX Server 3i 3.5.0 build-207095

  ... I think that the 3i says I have an ESXi 3.5.0 but build 207095 the buid even as ESXi 3.5.0 patch 5?

  If this is not the case, how should I do to update? What is the KB # I should download?

  I can manage using vSphere Client 5.5 and I can't SSH using PuTTY.

  Note: When I run... "# esxupdate - bundle = ESXe350-201302401-I - SG.zip updated ' of in the folder where his property in the data store, nothing happens... just a new line scrolls.

  Also...

  # esxupdate query

  <? XML version = "1.0"? >

  <>request-response

  < installed packages >

  < package ID = "ESX-207095" >

  firmware < name > < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < package ID = "ESX-CLIENT-204907" >

  < name > viclient < / name >

  < version > 2.5.0 < / version >

  < rel > 204907 < / rel >

  < / packages >

  < package ID = "ESX-TOOLS-207095" >

  < name > tools < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < / packages installed >

  < / request-response >

  # /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/patches/ESXe350-201302401-O-SG

  ... is there any update for this system? I therefore believe that the patch software etc was not around when I was installing this server in 2010.

  Based on KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014508 you run ESX 3.5 Update 5.

• How to install VIM / or nano on ESX Server.

  Hi I need to configure my server ESX for SNMP / traps and syslogs however when I tried to use nano / Vim

  Nano: not found

  Vim: not found

  When I tried to open the file snmp.xml.

  

  I can understand that it could not be installed but there at - it another editor that I can use?

  Or do I have to put my ESX Server in maintenance mode, and then install the editor?

  Kind regards

  You can use vi, especially if you know vim, vi will not be much difference.

• Data growing in vmware esx server disk 3

  Hi, I have been asked by a colleague If I can be useful to expand d: ------disc on an existing virtual windows server 2003.

  They use:

  VMware ESX Server 3i Version 3.5.0 Build 110271

  VMware Infrastructure Client Version 2.5.0 build 119826

  Is it possible to extend the disc in vSphere clienten, start by clicking on the edit \ disk and then expand the *. wmdk file of 25 GB to 40 GB? After this connection in the server and expand the disk using a few better disk expansion program.

  / T.

  Yes, it should work even with the virtual machine. After having developed the virtual disk in the graphical interface, connect to the virtual machine Windows 2003 (or open the console or via the administrative RDP session) and rescan storage in disk management. Assuming that the data disk has only one partition or is the last partition on the disk and does not have the file exchange/swapfile on it, you may even be able to extend disk space by using the diskpart command-line utility.

  André

• Hot migration is possible with VMWare ESXi 5.1.0 without an ESX server management

  Hot migration is possible with VMWare ESXi 5.1.0 without an ESX server management?
  I wonder for a future issue, a scenario where a system administrator must build a Win2008 + DC on local storage, server
  then, once the physical box is integrated into the class network, the physical box is connected to the classified SAN storage.
  Is it possible to hot - migrate the server Win2008 + CC local storage to SAN storage at this time, with only the
  free version of VMWare ESXi 5.1.0?

  Welcome to the community - I guess that you are looking to do this, while the virtual machine is currently running - this is not possible without a management server, also called vCenetr, but all is not lost because you would be able spend the VM local storage to the San with the VM posered using the client storage management features

• Logic unit number is not available in ESX Server 4.

  Hi people,

  Storage guys have mapped the LUN on the ESX Server. But when I check in ESX server using esxcfg-volume - l... LIN is not visible.

  However, when I check using esxcfg-scsidev - c... I could see that the LUN is assigned to my ESX server...

  Any thoughts here... from front ESX... How can I make the LUN available to my ESX?

  Concerning

  Sylvie

  Is this an existing lun or is a new?