Ran Diagnostic Report/average line of the disc is 2
About 2 weeks ago, I upgraded my Vista laptop to 1 GB. It works perfectly, but I ran a Diagnostic report and it showed in the information Section that average disk queue length was 1. I did a defragment disks and changed it to 2, but I still get the same message informtional, now with 2 instead of 1.
Should I do something else because it works well? The only change I noticed is that I had to close it with the button yesterday because the screen was grey long after many updates of Windows. He opens normally today and made a few configuration. I got scared when I saw the screen after seeing some comments on a Blue Screen of Death or something like that, but I'm sure it was gray not only blue.
Thank you
AG
Hi Ana,
Length of queue Disk Avg... This counter is in fact closely related to the % disk time counter. This counter converts a decimal value to the % disk time and displays. This counter will be necessary at the time where the disk configuration employs several controllers for several physical disks. In these cases, the overall performance of the disk IO system, which consists of two controllers, could exceed that of an individual disk. So, if you look at the % disk time counter, you would see only a value of 100%, which represent the total potential of the entire system, but only that he had reached the potential of a single record on a single controller. The actual value may be at 120%, which displays the Avg. disk queue length counter. 1.2.
The tab disk in the resource monitor (Start - Run - Resmon, or just the button resource monitor in the performance of the Task Manager tab) will show the disk of process activity to help understand this specific process is causing so much disk activity.
For reference:
The monitoring queue length
http://TechNet.Microsoft.com/en-us/library/cc938625.aspx
I suggest you send the request to the Forum here to improve the assistance on the issue:
http://social.technet.Microsoft.com/forums/en-us/categories
Let us know if you have other questions about Windows in the future. We will be happy to help you.
Tags: Windows
Similar Questions
-
I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error. Googling everything nothing helped, so I'm here. Error:
Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.
Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.
The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.
Ideas?
Thank you.
Find the esx.conf file in/etc/vmware.
If you could also share a copy with me...
Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name
Check the link as well below.
-
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 73KQG - K3FTD-B6V4T
The Windows Product Key hash: bvWfIY02r4V73iAUwr7YDptieiA =
Windows product ID: 00359-032-9544204-85833
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {D6836677-F995-4728-A7E7-6237622EB868} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120330 - 1504
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{D6836677-F995-4728-A7E7-6237622EB868} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 32 *-*-*-*-B6V4T 00359-032-9544204-85833 5 S-1-5-21-2584338913-1955297478-615780619 Hewlett-Packard HP Pavilion dv9700 Notebook PC Hewlett-Packard F.2A 20080222000000.000000 + 000EA513507018400FE 0409 0409 Central Standard Time(GMT-06:00) 0 3 HPQOEM SLIC-MPC 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00170-032-954420-01-1033-7601.0000-2482012
Installation ID: 003831655321138975382172967493670240426664924036326054
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: B6V4T
License status: initial grace period
Time remaining: 42660 minute (s) on (29 day (s))
Remaining Windows rearm count: 4
Trust time: 04/09/2012-12:17:34Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: NAAAAAEABQABAAEAAAABAAAAAgABAAEAJJTGwVLfBpiYYLzjiMx2G8rYRCym1Xgl1iR4qg ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP NVIDIA MCP67-M
SRAT AMD HAMMER
HPET PTLTD HPETTBL
START PTLTD $SBFTBL$
MCFG MCFG PTLTD
TCPA Phoenix x
SSDT PTLTD POWERNOW
SLIC SLIC-MPC HPQOEMPartial product key: B6V4T
License status: initial grace period
Time remaining: 42660 minute (s) on (29 day (s))
Remaining Windows rearm count: 4
Trust time: 04/09/2012-12:17:34Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
My Windows Vista says no real preload even you the Diagnostic report says that it is
I did a Diagnostic report to ensure that it was following the report says it is
My laptop was made by Hewlett-Packard and was brought around 2008-2009, I can't give a good
As it has been a Long time ago because of this Theres no disc or the Code to enter for it any help will be appreciatedDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 27HYQ - XTKW2-WQD8Q
Windows product key hash: U8YEZzymoD4DMyaMb32rPrNIS90 =
Windows product ID: 89578-OEM-7332157-00061
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {B2A48F4F-FBAE-46B7-8A5A-D251A0EA0086} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6002.vistasp2_gdr.130707 - 1535
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 102
2007 Microsoft Office system - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{B2A48F4F-FBAE-46B7-8A5A-D251A0EA0086} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 32 *-*-*-*-WQD8Q 89578-OEM-7332157-00061 2 S-1-5-21-3890092826-248841252-1879265895 Hewlett-Packard SLIC-MPC Hewlett-Packard F.06 20090603000000.000000 + 000E3313507018400F8 1409 0409 New Zealand Standard Time(GMT+12:00) 0 3 HPQOEM SLIC-MPC 102 100 Microsoft Office system 2007 12 19 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89578-00146-321-500061-02-5129-6001.0000-3262013
Installation ID: 017976953701941602953840295165970024400041181832384600
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: WQD8Q
License status: Notification
Notification reason: 0xC004F059.Windows Activation Technologies-->
N/A--> HWID data
Current Hash HWID: NAAAAAEAAgABAAIAAQABAAAAAwABAAEAeqjuyTbovOx6f3r49mXWFfL0 + H6w9khgrFZGyg ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: no, table invalid SLIC
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-MPC
HPQOEM FACP SLIC-MPC
HPQOEM HPET SLIC-MPC
START HPQOEM SLIC-MPC
MCFG HPQOEM SLIC-MPC
ASF! HPQOEM SLIC-MPC
SLIC SLIC-MPC HPQOEM
SSDT PmRef CpuPmTry to activate using the number appropriate for your region.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspxJ W Stuart: http://www.pagestart.com
-
Loop lines in the SQL report.
Hi all
I have created a very different application, and I ran into quite the roadblock.
Let me give you a brief on the problem.
I have a form that must be dynamic and therefore is created during execution.
I used the APEX_ITEM and a SQL SELECT CASE to create a dynamic report.
For example if the DATATYPE column in my table shows the DATE, I create an APEX_ITEM. DATE_POPUP, if it says CHAR I create a text box, and if a column called
LOV is filled APEX_ITEM. SELECT_LIST_FROM_QUERY using the numerical value of the LOV to query a list of values from a different table.
Now, this leads me to say in a single column of there could be different data_types. which means that the update feature several lines with apex will not work.
It's easy to get the data to display. However to save updates is another story.
Which brings me to my question. Does anyone know way in which you can loop through each row in a SQL on APEX report and evaluate each line individually.
I would like to accomplish something like that
LOOP
MyUpdateProcedure (currentrow_id, currentrow_datatype, currentrow_value)
Go to the next line in the report
END LOOP;
Quite simple in theory? We have an APEX expert out there that could give me a hand with this?Codes,
It seems to me that you could add a hidden field to tell you what you need to know in order to determine the column update.
Assuming that it has been created using the parameter p_idx = 50 and contained the names you have provided (for example DATA_DATA) and your primary key is created using p_idx = 1, then you could add the logic of the update in a suite submit process something like this
BECAUSE me in 1... apex_application.g_f01. COUNTY
LOOP
CASE apex_application.g_f50 (i)
WHEN "DATA_DATA" THEN
-Run the update on the data column
WHEN "CHAR_DATA" THEN
-Run the update on the column of char typeetc.
If the multi-type column is created with the api apex_item by using p_idx = 2 then you just reference it in the loop as apex_application.g_f02 (i) and the primary key is apex_application.g_f01 (i).
I hope this helps.
Greg
-
Average length of the line for the index?
Hey guys, I'm still working on my model sizing and had a question about the index. Is there a comparable indexes avg_row_length as there are tables? I know how to make the length of the average line on a table with no problem... it's the same for the index? Y at - it other overhead costs outside the normal table overhead that I need to think about indexes?
Much obliged.
TimSThe little overhead that I would be more concerned with index, which will depend on the kind of pads that occur, would block splits (split 50-50 vs 90-10 block). I suspect that it is dependent on version as well. It seems that it would be rather difficult to report a simple formula. If there is never entirely free deletions until blocks, that could also lead to some rather interesting General calculations that depend on time... You can, of course, simply increase the fudge factor credits allows you to account for this, but it seems difficult.
It's one of the reasons why I prefer to build tables / indexes, do some DML representitive and then extrapolate the sizes real rather than relying on spreadsheet formulas.
Justin
-
Remove the line from the Excel report when generating reports
Hi all
I try to delete whole lines of the report excel during the generation of the report in excel, but I'm not able to do this. Here I am attaching an excel template, in that I want to delete line no 3 to 5 How can I do this. I'm using LabVIEW 8.6 Report Generation Toolkit for Microsoft Office 1.1.3
Thanks and greetings...
If there is no function to generate report for simple operations like this, then use the palette of VBA macros to run this code snippet:
'remove all lines between two rows inclusive '.
Void DeleteRows (intTopRow As String, intLastRow As Integer)
Range (cells (intTopRow, 1), (intLastRow, 1)). EntireRow.Delete xlShiftUp
End SubImport Excel module allows to load the .bas file then run Excel Macro with parameters 3 and 5. Check your security settings if you get an error in the macro.
-
Original title:. network controller error?
the device, network controller, is not understood correctly. report "tv_ConfigMgrErr1". Impossible to download whatever it is or it causes Internet Explore stops working. I get a diagnostic report saying that there is no driver installed for this device. It was working fine yesterday and then around 05:45, my computer made automatic updates and it was after that when I tried to download a game for my grandson and started to get in trouble. I'm no computer expert so I don't have any idea what to do.
Hello
1. you are using an internet connection wired or wireless?
2. What is the exact error message you get when you try to download?
3. what happens when you try to download the game?
4. What were the updates that were installed yesterday on your computer?
Check out the following link.
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
Method 1:
You can see the following link.
Solve the problem of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
See also:
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Method 2:
You see the following article.
How to troubleshoot network connectivity problems in Internet Explorer
http://support.Microsoft.com/kb/936211
Method 3:
I suggest you uninstall and reinstall the network card and check. Follow the steps.
(a) click Start and type devmgmt.msc and press ENTER.
(b) find the network card and expand it.
(c) right click on the Uninstall adapter selection.
(d) restart the computer.
Windows should install the necessary drivers.
You can now try to install the latest driver on the manufacturing site.
Check out the following link.It will be useful.
-
Original title: System reports the NIC does not properly
Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)
As none of the problems are met with connection network, do I ignore this warning or try to update the driver?
Hi eucalyptussurfer,
You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.
Please see the following article:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I SOLVED MY PROBLEM BECAUSE OF THE HELP I RECEIVED BELOW. MY ORIGINAL MESSAGE FOLLOWS. BE SURE TO SCROLL DOWN FOR THE SOLUTION!
Please see the focus 2 below: I read all the posts here and of course I cleaned the printhead of many many times. It is almost the worst lines now. The printer cartridges are all full, and I also turned the printer on and off the power, etc... . Thus only line ACEs and calibtrated a bunch of times.
Is there anything else I can / try? Is there something else to clean inside and the dust that creates streaks? Doesn't seem wise to call and pay for this service.
None of my impressions with the graphics seem to be good all of a sudden and he is hurt and slow down my business – do I have to buy another printer?
Help!
Is the a page of print head cleaning blocks magenta and red lines? This means somehow magenta ink is not put on paper on these lines. Because this is not the whole of the region, it's not magenta ink came out. Must be on the printhead nozzles is obstructed or somehow blocked. It is display in the fine lines on the quality report page you have posted. Broke the thin vertical line shows the nozzles at these locations are not belittling inks.
If the clean print head does not resolve the problem, you may need to replace the print head.
The 8500 has 2 print heads, one for the black and magenta/cyan. This page show you more about clean/replace the printheads on 8500 a: http://support.hp.com/us-en/document/c01615896
In this page, there is a photo showing the printhead with the wording: "nozzles - do not clean", it is because that manually clean nozzles could easily damage the print head and make things worse. But if anything the problem and replace the print head, you can try to clean the area of the nozzle with a fluffy, wet with warm water. But when a printhead issue, when the "clean printhead" functioin does not help, I strongly recommend to replace the print head.
-
Please advise on the WGA Diagnostic report
Separated from this thread.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - YG69F - 9M66D-PMJBM
The Windows Product Key hash: /kehptF9HHVxM5d8dUnqgcfndXw =
Windows product ID: 00426-OEM-8992662-00497
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {151CA62A-EC90-4687-84F1-EB3E89DD7D7C} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7600.win7_gdr.110408 - 1633
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100Other data-->
Office details:{151CA62A-EC90-4687-84F1-EB3E89DD7D7C} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 32 *-*-*-*-PMJBM 00426-OEM-8992662-00497 2 S-1-5-21-1750060887-570863241-1873143589 Dell Inc. OptiPlex GX620 Dell Inc. A07 20060331000000.000000 + 000B4BA3607018400FC 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x80070005
Output beyond bitmask:--> HWID data
Current Hash HWID: MgAAAAEAAwABAAIAAAABAAAAAgABAAEA + l5wrkdmqnYAG4L 2FNkFESdlOcOry3c7Ds plusActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL GX620
FACP DELL GX620
HPET DELL GX620
STARTING DELL GX620
SSDT DELL st_ex
ASF! REFERENCE DELL GX620
MCFG DELL GX620Windows 7 was never provided with this computer, it is earlier than its release by several years. Missing also the entry of BIOS to take in charge of the license from Dell, you have installed.
You will need to purchase a new license.
-
Please help interpret the WGA Diagnostic report
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - CM74G - RPHKF-PW487
Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
Windows product ID: 00371-177-0000061-85312
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {AD5CD124-F808-4C11-812D-C083CA6AE69C} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.130708 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Standard 2007-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{AD5CD124-F808-4C11-812D-C083CA6AE69C} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 32 *-*-*-*-PW487 00371-177-0000061-85312 5 S-1-5-21-1418174297-3138692001-2549392181 Acer AcerPower series Phoenix Technologies, LTD R01-B1 20061229000000.000000 + 00014643A07018400E8 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 ACRSYS ACRPRDCT 100 100 Microsoft Office Standard 2007 12 2F86476FF357D88 TkMj3gBqmzOsHtwrw1bGaARcjZs = 89396-708-6223654-65841 14 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-177-000006-00-1033-7601.0000-0372014
Installation ID: 003955583222352140352012495236723536527035297455666521
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: PW487
License status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 3
Trust time: 01:47:28 11/04/2014Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C532
Beyond: 0 x 0000000000000000
Event timestamp: 4:11:2014 01:20
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: LgAAAAEAAgABAAEAAQABAAAAAQABAAEAnJ8UBTwiXkaSAKzOQMJqKoC0qA3I9A ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC ACRSYS ACRPRDCT
FACP ACRSYS ACRPRDCT
HPET ACRSYS ACRPRDCT
MCFG ACRSYS ACRPRDCT
SSDT PTLTD POWERNOW
SLIC ACRSYS ACRPRDCTSeparated by the moderator of this thread:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-Professional-activation-key-code-not/a31d6233-d8f8-4c31-ae1e-5457284c0912#LastReplyLicense status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 3
Trust time: 01:47:28 11/04/2014Sound by using the default key, you must use your genuine product key and activate it.
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usActivate Windows 7 on this computer:
http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer -
How to get the device Diagnostic report?
Hi guys.
Do you know how to get the device Diagnostic report?
Is this possible on a Simulator?
Thank you.
Hi guys.
I found the way how to get.
It's easy.
In order to get the diagnostics test report, go to Options / settings-> Network Mobile-> select "diagnostic test" in the menu-> then 'run '.
-
Include the attribute custom report using the disc
I'm to customize a script provided by Alan Renouf in his PowerGUI Powerpack. The script I'm customization in the Powerpack is named 'VM disk sizes.
His screenplay does everything we need from a point of view of output except that we can also include a custom attribute (Custom Field) VM as well as the information of the disk space. I have included the below custom script, please note that this is a script/PowerGUI PowerPack we customize but was initially written and provided by Alan Renouf and all credit for this original work must be given to Alan.
I have included our custom below script and have "in bold Red" line in the script that does not work:
$AllVMs = get-View - ViewType VirtualMachine. Where {-not $_.} Config.Template}$SortedVMs = $AllVMs | Select *, @{N = "NumDisks"; E={@($_. Guest.Disk.Length)}} | Sort-Object-down NumDisks{ForEach ($VM to $SortedVMs)$Details = new-object PSObject$Details | Add-Member-Name name-value $VM.name - Membertype NoteProperty$Details | Add-Member - MemberType NoteProperty-name CustomFields-value (($VM.)) CustomFields | %{"$($_. Key) = $($_.) (Value)'}) - join ',')$DiskNum = 0Foreach ($disk in $VM. Guest.Disk) {}$Details | Add-Member-name "drive$ ($DiskNum) path"-MemberType NoteProperty-value $Disk.DiskPath$Details | Add-Member-Name "Disk$ ($DiskNum) Capacity (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) Capacity / 1 MB))$Details | Add-Member-Name "Disk$ ($DiskNum) FreeSpace (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) FreeSpace / 1 MB))$DiskNum ++} # end foreach nested$Details.PSTypeNames.Clear)$Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VMGuestDisks) '$Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VM) '$Details} # end foreachWhen you use the Get view as seen on the first line of the script, it appears the CustomField information not available in the generated view. How to develop the view to include CustomFields/CustomAttributes for each virtual computer in our environment and then report on their subject?
Please let me know if I did a poor job explaining the scenario and what I'm after here. Any help is greatly appreciated!
Hello, jSun311-
Yes, you are right - there is no such thing as the "CustomFields" property on a managed object VirtualMachine . You can always get the names and the corresponding values of the custom fields, you just have a little. For example, you could change the line to:
...## make a comma-separated string that holds the custom field key/value pairs, like "cust0 = myValue0,cust1 = myDateInfo"$Details | Add-Member -MemberType NoteProperty -Name CustomFields -Value (($VM.Value | %{$oCustFieldStrValue = $_; "{0} = {1}" -f ($VM.AvailableField | ?{$_.Key -eq $oCustFieldStrValue.Key}).Name, $oCustFieldStrValue.Value}) -join ",")...
and you should be happy as a clam.
BTW, this call Get-view on your first line could be optimized a little using the - Filter parameter, like:
$AllVMs = Get-View -ViewType VirtualMachine -Filter @{"Config.Template" = "false"}
Pretty minimal in this case, but can be very useful in other scenarios of Get-View. And, you may want to retrieve only the properties of the managed VirtualMachine object that you plan to use, so that the memory usage is reduced to the minimum, speed is optimized, etc. (do you this by using the - Get-mode property param).
Anyway, how does do for you?
-
Highlight the line in the classic report
Hi all. Is it possible to highlight only one row after the click of the mouse in a classic report? Perhaps with the help of JavaScript (or jQuery). Version of the APEX - 4.1.x
view Denes Kubicek ApEx BLOG: line highlight selected to highlight a current row of the report
See also Notes on Oracle: APEX: select a record in the report - with dynamic Action
Can solve your problem.
Leave.
Maybe you are looking for
-
Why is my bookmark 'localhost' changes to a Google search?
When I 'Bookmark this Page' while watching a localhost/~username/target.html file, the current bookmark is initially correct, but then changes to a long Google search, I did a week ago. But when I bookmarked 127.0.0.1/~username/target.html, he gets a
-
Seizure semi-automatic Firefox redirects me to the wrong Web site
Sometimes, when I type a URL of Web site in the address bar, it autocompletes the URL of the Web site, but then after I pressed Enter, it goes to the wrong website (the website that appears first on the drop-down list). My example is when you type 't
-
Just bought an iPad running IOS 9.2.1 3. In the General settings, I see no Option Siri nor I see the Option dictated in the keyboard settings. Restrictions is set to Off. I don't know this model iPad (MD-368C/A) IS compatible with Siri. Should Siri b
-
What is the most likely thing the thief of my iPhone 6 has done?
Hi, I was wondering if someone can help me please.Sunday night, stole my iPhone 6. (I have the last iOS9 updated on this subject). Fortunately, I was with a friend at the time and she called my phone and it went straight to voicemail without ringing,
-
Kernel for Slate 21 sources s100 (E2P18AA)
Hello In the last days, I asked the source twice using then submit the form with no result. Is there a link where I can actually download the file?