random and repeated reboots failed

Similar Questions

• "Connection server failed" constantly popping up on sites popular randomly and unable to use FF on Linux Mint 17.1

  As above, websites at random and many of those that I use, say "Connection server failed" and then I can't even go to the Web site. I use FF 35.01 on Linux Mint 17.1. This has never happened before... Pages work fine on another device or Chrome!

  I found my problem!

  I checked the link you gave me, but none of the error messages that are matched. So, I googled the error message, and he apparently had to do with the date of my computer. The date was one day! And what to do with some https sites... Here is how I fixed / solved my problem:
  http://www.genuinescope.com/blog/sec_error_ocsp_future_response/

  But thanks for helping me narrow my problem!

• BSOD error: 0 x 00000116, nvlddmkm.sys, attempt to reset display driver and recover timeout failed.

  Original title: BSOD, Vista Home Premium, HP Pavilion dv6000 (laptop)

  Full text of the error message (most frequently observed when playing Bejeweled 2 Deluxe, although it happened before the game has been installed):

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  Try to reset the display driver and recover from timeout failed.

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  updates to Windows, you may need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use Safe Mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0 X 00000116 (0X8CB26300, 0 X 000000022, 0X8B014A70, 0X00000000)

  nvlddmkm.sys - address 8B014A70 base at 8B00B000, DateStamp 493750e2

  Data collection for the crashdump...
  Initialization of the disk for the crashdump...
  Beginning physical memory dump.
  Dumping physical memory to disk: 100
  Total physical memory dump.
  For more assistance, contact your system administrator or technical support group.

  Hello

  It's my generic how updates of appropriate driver: (update your video/display driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
  evening with their own software and drivers and all other main drivers you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable driver facilities in
  Windows updates, that leaves about Windows updates but it won't install drivers
  who will be generally older and cause problems. If updates offers a new driver can
  HIDE (right click on it) and then go get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Laptop to stop randomly and it says kernel mode trap

  whenever im in the middle of something my laptop stops

  It says kernel mode trap. it restarts... can't understand wat is it... Please help me... my it was not more than 2 months since I have this laptop

  desperate for solution en

  Original title: kernel mode trap

  Hello

  You really need to contact the seller and the manufacturer of system support. In OEM for system
  Maker is responsible for the functioning Windows and hardware. So no matter
  of cause, it is to solve. And it is under full warranty and may need repair or replacement.
  Keep in mind do you more they will say that it is something you have done. Added as
  even if you are somehow able to solve the problem you would still want it documented just in case where
  There are other related issues on the road.

  ==============================================================

  If you really want to solve the problem that I do not recommend to a new computer:

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8/8.1)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  BCCode: 0x0000007f with the parameter 00000008 7f usually means a hardware problem.

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, although it
  are other causes. Power electric low could also lead to this. Use the above troubleshooting utilities
  and below and when you get to the drivers and segments of memory see below then
  go back troubleshooting if necessary.

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if
  No (remove the cables and the relocation of their aid to eliminate minor corrosion). On a laptop
  on everything that can be done is to reinstall the memory.

  Notice the 08 (double fault) as 1st parameter means there are likely two causes. Do not forget
  to update your drivers manually by using Windows updates only detects certified pilots and
  Microsoft and the manufacturers are far behind in this process. Update the BIOS of the card NETWORK, WiFi, and
  Display/video and other important factors.

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or
  Support from the manufacturer of your system.

  --------------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or a double foul (an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  UNEXPECTED_KERNEL_MODE_TRAP parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.

  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.

• 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.

• 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.

• 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault:
  • A kernel stack overflow. This overrun occurs when a cover page is hit, and the kernel tries to push a frame. Because there is no battery left, a stack overflow results, causing the double fault. If you think that this presentation has taken place, use ! thread to determine the limits of the stack, and then use KB (display Stack Backtrace) with an important parameter (for example, 100 KB) to display the full stack.
  • A hardware problem.

Less common trap codes are:

• 0x00000001 - a system call - debugger

• 0 x 00000003 - a breakpoint in the debugger

• 0 x 00000007 - a statement of material with no present coprocessor coprocessor

• 0x0000000A - has corrupted Task State Segment

• 0x0000000B - access to a memory segment that was not present

• 0x0000000C - access to memory beyond the limits of a stack

• 0x0000000D - an exception not covered by another exception; a protection fault concerning violations of access to applications

For other numbers of trap, see an Intel architecture manual.

Cause

0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

Resolution

Debugging: Always start by the ! analyze extension.

If this extension is not sufficient, use the debugger kv (display Stack Trace) command.

• If kv shows a taskGate, use the command .tss (display task State Segment) on the part before the colon.

• If kv shows a frame, use the command .trap (trap display frame) to format the shading.

• Otherwise, use the command .trap (trap Display frame) on the appropriate framework. (On x 86 platforms, this frame is associated with the procedure NT! KiTrap.)

After using one of these commands, reuse kv to display the new battery.

Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

Check that all hard disks, controllers, hard drive and the SCSI adapters are compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
* 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

===========================================================

It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Windows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

========================================================

Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).

How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

How to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

How to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

If you need a USB Flash Drive recovery or other methods:

How to create a recovery USB in Windows 8 & 8.1

http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

Boot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

--------------------------------------------------------------------------------------

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

======================================================

After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

  Original title: help - csvhost.exe and problems to start

  My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

  Any ideas or advice?

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

• Black Vista screen falls down randomly and sometimes at startup

  My problem seems to be quite unique =

  I sometimes get a black screen crash when you play WoW, and sometimes Vista will not start and lead me to a black screen at startup.  These problems can be corrected by restarting the computer - there are however sometimes many restarts to get the system starts again.

  IV tried to update my video card, my monitor drivers drivers, cleaning of my drive C, did a LOT of research google about the problem as possible and I'm not sure what the cause is right, it could be a videocard related, or maybe not.

  I am running Windows Vista x 64 Home.
  Modern stuff Quad Core CPU, 8 GB of Ram.

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  To be able to remove ALL and reinstall all memory cards and cables (both ends) - actually delete
  and replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

  Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

  See this for help...

  http://support.Microsoft.com/default.aspx/KB/290684 MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• my computer shuts down randomly and blue error screen "100000ea".

  Original title: my computer shuts down randomly and blue screen before closing down.

  my computer shuts down randomly and blue screen before closing down.

  the error message is generated after that reboot is:
  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 100000ea

  BCP1: FFFFFA800826AA20

  BCP2: 0000000000000000

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\071512-98311-01.dmp

  C:\Users\Paras Desai\AppData\Local\Temp\WER-767228-0.sysdata.xml

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Hello

  Blue error screen is mainly related to the driver problem. However, it might be also due to hardware problems. The blue screen error message may or may not contain useful information but the file record of emptying to the smallest set of useful information that may help identify why your computer behaves as such. You can read them by installing the Windows debugging tools and follow the instructions in this article.

  How read partial memory dump files that Windows creates for debugging:

   

  http://support.Microsoft.com/kb/315263

  Note: The article mentioned above also applies to Windows 7 full version.

  Or post the screenshot us for clarity on the issue.

  Consult the following link which contains information about how to download files mindump:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

   

   

   

   

  Method 1:

   

  Step 1: Start the computer in Mode safe.

  Reference:

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If you are not faced with the same problem in Mode without failure, you can do a clean boot to eliminate any influence from third parties.

  A clean boot allows you to check if startup item or services to third-party application is causing this issue.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  Method 2: This error could be due to bad video drivers, video card drivers updated on the Web site of the manufacturer.

  Reference:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: SFC scanner.

  Reference:

  System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

• Windows 8 randomly and often freezes a new HP desktop computer

  Windows 8 randomly and often freezes a new HP desktop computer

  Having recently upgraded from Windows 7 to Windows 8 pro with my new (four months) HP Pavilion Slimline s5-1260 PC, frequently and randomly freezes and I have to reboot to recover my computer. I tried several of the HP help steps I found on the Internet such as: search for the latest updates of Windows 8 with my computer HP showing that it is up-to-date with automatic updates Windows 8 Alt F4 to close the program that is frozen with nothing happens from frozen computer and Ctrl + SHIFT + ESC to open the Manager tasks and nothing happens and the HP computer remains frozen which includes the loss of control of the mouse.

  **

  For the duration of four months prior to the upgrade of Windows 8 pro, I never had this problem with Windows 7.

  **

  If you have a third party anti virus on your computer, you would probably have to uninstall.

• Last second audio skips and repeats after upgrade 2015.3

  The question:

  Hello everyone. I just upgraded to 2015.3 and have noticed a problem since. When I made a file (file > export > "Add to Adobe Media Encoder Queue") the last second or two of the audio track bounces and repeats. It's a workflow I've used for several years without problem until today.

  Troubleshooting:

  I checked triple file hearing and resulting. WAV to ensure that the question was not there. I ran the audio by itself through the SOUL and it is fine. I dropped videos I did with slightly different parameters directly in the SOUL, and it travels very well. But when I export EI by SOUL - no matter what presets that I use in SOUL - the audio Bobbles in the end.

  As an experiment I did a long model of twenty second with audio long ten seconds followed. When I made the comp, the result was interesting - even though the audio file was only ten seconds of time, the last second of the audio track repeat endlessly through all twenty seconds.

  I deleted all my _AME folders, rebooted my Mac, created a new AE comp to scrape, interrupted audio, and had made the same question. (I was kind of hoping it would be a memory issue).

  The question seems to exist that in the link between AE and SOUL, but for the life of me, I can't find a setting to shake the bug...

  Technical information:

  27-inch iMac 2011 Mid, 2.7 GHz Intel Core i5, 16 GB RAM, OS X El Capitan v 10.11.5. I use version 2015.3 of the creative cloud, downloaded and installed last night.

  AE Comp settings (it is not editable because the company I work for has very strict guidelines): 1920 x 858, Square Pixels, 24 frames per second, full resolution, comps are every twenty seconds.

  Parameters of the SOUL (even once, it cannot be changed according to the requirements of the company): H.264, audio and video, export 1920 x 858 (1.0) 24 fps, progressive VBR, 2 pass, target 20.00 Mbps Max 22.00 Mbps, AAFC, 256 kps, 48 kHz, stereo. The only 'effect' that we use is vital - "Normalization of loudness" using the standard ATSC A/85 (LUFS-24).

  Any help would be appreciated - my workload is very heavy and the deadlines are tight. I have a good number of files requiring rendering in the next few days...

  There is a bug in after effects CC 2015.3 (13.8) where export your composition via Adobe Media Encoder cannot make audio correctly. Audio can be repeated at the end. It's only a problem with the audio, the video is not affected.

  The After Effects team is aware of this problem and is working on a fix. Until that is available, we recommend that you either:

  • Export with audio compositions using the queue of rendering in After Effects for an intermediate file (e.g., QuickTime with the GoPro CineForm, Avid DNxHD/HR or Apple ProRes codecs) and then transcode the file in the final format using SOUL. (Look at the SOUL records are very useful for this).
  • Install After Effects and SOUL CC 2015.2 and export with audio compositions using this version of the SOUL. Project files saved by after effects CC 2015.3 are compatible with previous versions of CC 2015 (a few new features, of course, won't be available). You can either add the composition in the interface of the SOUL, or open after effects CC 2015.2 (13.7) and use the add to the command queue SOUL there.

  Our apologies regarding this bug.

  (Under the hood: the problem is with the new audio architecture, which does not take into account segment size which requires of the SOUL for audio encoding.) The length of the composition should correspond to a multiple of the segment size requested, there will be no problem, but in most cases, the length of the composition does not match a multiple of what awaits the SOUL and SOUL filled the rest with audio Rassi is still in the buffer).

• I can't uninstall all programs and it says fail to uninstall, even with the cleaner and I don't know how to reinstall

  I can't uninstall all programs and it says fail to uninstall, even with the cleaner and I don't know how to reinstall

  Moving to the cloud creative download & install

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• The Adobe application manager maintains unexpectedly close immediately after that b being open when I try to download After Effects and repeat the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

  The Adobe application manager maintains unexpectedly close immediately after b being open when I download tryto After Effects and repeating the process when the error message appears asking me to reopen.  Why isn't she let me download After Effects?

  Drogers1102 please use the uninstaller of creative application Cloud Desktop, then reinstall.  You can find more details at the request of error "Failed to install" Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html.

• Music guard play/pause randomly and keep Siri activation with Apple earbuds in

  So about a month ago I bought a pair of new headphones from Apple at the Apple Store, they worked very well until last week, they kept turning on my music and stop randomly and activation of Siri. First is was not often, but now if that happens constantly, and it's really got on my nerves. I was looking through all the discussions, but they have had the problem with the Apple earbuds No. This is never happen to me before with the other Apple hear buds I've owned. I think I might have just gotten a lemon but I really want to go buy another pair.

  Accessories Apple are guaranteed for one year from their date of purchase, even if purchased separately from the iPhone, which in this case, they follow the warranty period of the iPhone. Feel free to contact Apple for support and service - Apple supported. You can either an appointment at the Genius Bar on your headphones or have them be replaced by express delivery by putting in place the replacement telephone. It seems as if the remote party on your helmet is somehow physically stuck inside that controls everything you described and it continues only when the headphones are connected. They will be able to set you up with a replacement, free of any cost to you as long as your helmet were not thrown or clearly abused.