Random error messages

Similar Questions

• HP Designjet 5500: Random Error Messages

  

  This image occurs in the course of employment. We see very briefly (2-3 seconds) at random times.

  

  Then, this image occurs after the machine beeps. Sometimes (about 25% of the time) this will disappear and the print job will resume after a minute or two. Until repeat error messages.

  

  This image will be the other 75% of the time and I have to restart the printer, unload and reload the paper, and restart the print job (very long)

  Please help me. I don't know if I've included enough information, but please do not hesitate to ask me, you need to know to solve this problem.

  For the last error of repair:

  System error: 0d 0004 xxxxxxxx (no-no blocking)
  Problem
  Description:
  This is a general error code that may appear in the
  The print head alignment process. The probability of this error that appears is
  less than 0.5% and there is nothing wrong with the printer.
  Corrective action: Re-start of the printer and the error code should not reappear.

  For the first two, that you want to check to make sure that the tube Assembly on the left side is in place.  Remove all ink tanks, then open the back cover on the left side.  The sheath is held in place by 3 levers are compatible with slot machines Assembly completely pushed to the front of the printer.  Make sure that this is the case.  You will also want to gently clean the small copper color inside the empty cartridge chip.  Just use a Publix moistened with alcohol.  If this does not help, I would buy another cartridge of black ink.  It is also possible that the ink cartridge error is what is interfering with the print head alignment process, so the first fixing problem will fix all the problems.

• Drops network connection randomly, error message in Event Viewer ' TCP/IP NetBIOS Helper service was successfully sent a stop command, error code: 0 x 40030011.

  Original title: network Drops randomly: the TCP/IP NetBIOS Helper service was successfully sent a stop control

  The given reason was: 0 x 40030011 [OS: network connectivity (planned)]

  I want a definitive answer for this! For some reason any that never seems to have been resolved. I'm on a Samsung qx410 computer J01 laptop with windows 7. The wireless adapter is an Intel Centrino Advanced - N 6250 AGN. I've tried making it so the adapters could not be disabled for reasons and basically all of the steps for this energy saving. I did everything with the drivers and software. In the event log, it has this event where he falls TCP/IP NetBIOS support apparently without reason? I then immediately lose my connection and it never seems to happen with the rhyme or reason. Any suggestions? It doesn't seem to be a hardware problem either. Where is microsoft on this topic? It seems to be a Windows 7 problem...

  Hello

  1 have had any changes made on the computer before the show?
  2. do you have a wired or wireless network connection?
  3. do you get an error message? If Yes, what is the full and exact error message?

  If you use try Method 1 of the Wi - Fi connection.

  Method 1:
  Disable authentication IEEE 802. 1 X.
  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:
  (a) click Start, type ncpa.cpl, and then press enter.
  (b) with the right button of your wireless network connection and then click Properties.
  (c) click the wireless networks tab.
  (d) under preferred networks, click your wireless network, and then click Properties.
  (e) click on the tab authentication, click keyar authentication to enable IEEE 802. 1 X for this network check box, and then click OK twice.

  Method 2:
  Try the procedure described in the link to create a new network profile.
  Create or modify network profiles
  http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profiles

  Method 3:
  If the problem persists, you can try the procedure described in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4:
  If the problem persists, you can try to reset the Internet Protocol.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 5:
  If still the issue remains, control whether or not the service is set to automatic.

  (a) click Start and type services.msc in the search box.
  (b) search of the computer browser.
  (c) series the service to automatic.

  Steps to set the auto services

  a. Locate the service (computer browser)
  b. right-click on the service
  c. If the service is stopped , then Start the service
  d. Select Properties
  e. and in the Startup type , select Automatic.

  Hope this information is useful.

• constant random error message "does not:

  weather it's IE, MSN browsers or use of files or download programs have run sys file check and results are no problem, how can I solve this problem

  When is - this problem started? A system restore may solve the problem

  Use system restore to restore your system to a previous state when it was working fine

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  In "Safe Mode with networking" virus scan

  ================================

  Note: If you use a modem cable or LAN connection at home, please leave point 1 below. If not, please ignore items 1 ~ 3 and proceed to step 4.

  1. reboot the computer.

  2. after 'POST' (Power On Self Test has usually a screen in text mode at the beginning when a system boots), continue pressing the F8 key until the Windows Startup menu appears.

  3. choose "Safe Mode with networking" and press ENTER.

  When in Mode safe mode with networking, check if the problem persists. If the problem persists, we will take the following steps to make a direct security scan.

  4 Please, open Internet Explorer and visit http://safety.live.com .

  5. Please click the 'Full Service analysis' button and follow the instructions on the screen to search for viruses on the computer.

  After completing the above steps, restart the computer to see if the problem is resolved.

  Also use the below mentioned the software to scan your system if necessary

  http://www.Malwarebytes.org/MBAM.php

  www.Microsoft.com/security_essentials

  http://www.prevx.com/

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error message random popup re: iCloud

  Since last week, I received an error message popup on my desk random. He says: "This Mac cannot connect to iCloud due to a problem with '[email protected]'." Preferences iCloud open on this issue.

  I give myself two choices - click on 'Later' or 'preferences iCloud.

  After trying to change my preferences, it asks me my password. (I guess to iCloud, however, I've never implemented).

  Frankly, I don't feel at this point type in ANY password in case some j@ck@ss trying to hack me.

  To provide a little more background, I called the Apple Support last week and explained what was going on. He thought that perhaps malware, so I downloaded and ran a MalwareBytes scan as suggested. Nothing found.

  Also running Sophos, once again nothing.

  Have I not concern about piracy? Should I change all or part of my passwords?

  Is this random popup a software problem? If so, how the hell do to stop? This once per hour popup in the middle of the screen is quite a nuisance.

  Thank you in advance for help to solve this issue...

  Sorry, do not understand how you are prompted for the password? Did you manually go to the system preferences > iCloud to see if you are registered in there? If you are, then on iCloud there and then reconnect again to see if the problem will disappear.

  If it returns, then log back in to iCloud, then go to:Apple - my Apple ID and change your password. Make sure it is a secure password (8 characters, upper and lower case, special characters, etc.). Then log in System Preferences > iCloud with the new password and see if the problem is resolved.

  Good luck

  GB

• Error message: "the temp"e:\random number\cygwin\tmp\"directory is not a valid directory. Cannot install Visual C++ express 2010.

  Original title: cannot install visual c++ express 2010.

  When I ran vc_web.exe, I got this error message: "the temp"e:\random number\cygwin\tmp\"directory is not a valid directory. Implementation cannot continue. "Can help to solve this problem? Thank you.

  Hi moyeh,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/Vsexpressvc/threads

  Hope the helps of information.
  Please post back and we do know.

• My computer randomly gave me a blue screen, the error message "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys).

  Original title: driver error

  They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.

  Here is a list of the help page instructions:
  «' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "
  -Your program and Version: don't know what to put here.
  -Your operating system and Version Windows 8
  -Your browser and the Version of Google Chrome Version 28.0.1500.72 m
  -All soft/hardware you have recently installed or removed - None.
  -Any recent changes that have been made to the system - None.
  -What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.
  Specification of the computer if necessary:
  HP - Sleekbook 15.6 ENVY "
  AMD - processor A10
  -DDR3 SDRAM
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  You can learn more about BSOD here
  
  
  
  
  Team Zigzag3143.com  

• In XP randomly receive error message "Windows Explorer has encountered a problem and needs to close"

  I get the error message "Windows Explorer has encountered a problem and needs to close".
  It occurs at any moment while I'll do something on my computer.
  The signature of the error is,
  App name: explorer.exe
  App version: 6.0.2900.5512
  The mod name: unknown
  Mod Version: 0.0.0.0
  Offset: 4ec683bd

  After the error message appears and I click 'send or do not send', everything on the screen refreshes, & I have to reset some programs.

  I am unable to do a system restore to solve the problem because I have no good restore point before this problem occurs. He began to occur initially in Jan 2011 & I can't go to a restore point of return in 2010.

  Can someone please?

  * original title - I get an error message "Windows Explorer has encountered a problem and needs to close". It's a little different from the others I found the message communautaires.*

  Hi Jaaz76

  
  Method 1:

  You can perform a security analysis and check if there are viruses or malware present. Check out the link below to run the scan and check if this helps-

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Method 2:

  Also I suggest you perform a SFC scan and check. To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow

  c. a message indicating that "the system scan will start. Be patient, because the analysis may take some time

  d. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/310747

   

  I hope this helps.

• I get an error message related to 1CF157n4.exe. It appears randomly.

  Original title: ErrEE

  I get an error message "1CF157n4.exe it appears every few minutes.  How can I fix?

  Hi Garyantle,

  ·         When exactly do you get the error message?

  Please provide further information on the error message.

  The average while I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Receive an error message "Windows cannot find"C:\Windows\Program Mozilla Firefox Firefox\firefox.exe"." when launch firefox without the inability to use

  Hello!

  It's happened since I got a virus a months ago who was preventing the computer to start. She came back from the repair shop and it begins again now. But after a few hours of using Firefox, this message pop up at random:
  "Windows cannot find"C:\Windows\Program Mozilla Firefox Firefox\firefox.exe". Make sure you typed the name correctly and then try again. »
  Example: http://www.risingroad.com/foxhound/faq/images/Windows%20cannot%20find%20firefox.jpg

  and Firefox still work after this message appears. I already uninstalled and installed new Firefox completely, and the message still appears upward. What this mean and is it harmful to the computer?

  I'm on Windows 8

  I had the pop up ads sensation can cause the problem and talked about it to the engineer in computer science from my father. It installs Malewarebytes and there was indeed still a maleware by repair men left. The difference was, Chrome to view the full announcement page while Firefox may have in maintaining security to block this kind of page, and the result was the error message. (I didn't know that because it happened to me on my computers to the precedents and even Firefox used to show me the ad then) Thank you for warning me.

• How can I fix an error message saying "could not read the manifesto of chrome?

  Unable to read the chrome manifest ' queue: / / / C:/Program % program % 20Thunderbird 20(x86) /Mozilla % 20Files / chrome.manifest'.

  All of a sudden, I can't connect to the server '? ' and I get some error messages. The above more "the RETR command failed" and "sending the password has failed, #AUTH701 Service unavailable."
  I tried to remove my password of memory and he asked me again but no joy. I checked and my webmail - Yahoo - works fine. TB won't just go get him. Can I get help from anyone please?

  The problem is that the ATT / Yahoo email service is apparently run by kindergarten children and no client att is getting what they pay for. They give a list of messages to thunderbird, it can recover, then say gotcha I can't get back them. ATT it works not. You use their mail add in a browser.
  I speak of this here http://thunderbirdtweaks.blogspot.com.au/2013/04/the-retr-command-did-not-succeed-thank.html

  However, if you dig into your Thunderbird profile, locate the popstate.dat file and delete it.

  Menu (alt + H) help > troubleshooting information

  Click the display folder

  Close Thunderbird

  Navigate to the mail folder in the Explorer window that opened.

  Now the att.yahoo or any name server they use this week.

  popstate.dat will be in this folder.

  Delete this file makes Thunderbird forget where it is up to download mail from Yahoo, apparently changing id numbers at random intervals or something. The result is that you have left on the server is downloaded again.

  So, you can this add-on to clear the mess. https://addons.Mozilla.org/en-us/Thunderbird/addon/remove-duplicate-messages-Alte/?src=search

  I blame ATT / Yahoo also are about 99% of the people who come on these forums about this ATT/Yahoo customers. But it could be the continuation of security they provide as well. McAfee caused problems with Thunderbird for over a year and my best recommendation is to not let anywhere near your mail. It is, however, something quite unique to Att / Yahoo that does not exist until they became involved with the yahoo service.

• I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. »

  I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. "Do you know what is happening here - what could be the problem? (I have the latest version of Firefox already installed. I previously got Firefox error messages indicating "Firefox update failed". However, I already have the latest version of Firefox installed when I got these error messages.)

  I think that we must hope that the problem will be resolved at the present time. If you see the error message again post in this thread. Also, it would be unusual get this message while trying not to update, but if you get if you try to copy and paste the details of console error that they can be useful.

  Use

  • keyboard Ctrl + Shif + J
  • or button-> Web Developer Firefox-> Console errors

  This kind of message is apparently the only normally expected when you try to update to Firefox. It seems strange that you get the message using a 'Œuvres' document, but others have reported this message seemingly random incidents.
  (So normally, you must clear the error console, and then try to update knowing the error messages have been the result of this attempt to update)

  If I had this problem my concern would be that some kind of malware may be involved, but the message can then indicate that all this malicious program is upset.

• HP Pavilion Gaming Notebook 15: Error Message received "the operating system is not currently configured torun this application."

  Anyone happen to know what this error message is referring to, or what should I do?

  It unfortunately and it does not say aything else. There only the option to click OK that closes just the box pop up.

  Its been popping up randomly in the past several times I used the laptop. Initially I thought that it was because there was still thinking it would correct after the execution of the latter but its re-appeared again and updates to run. It does not ask respect or other options to solve the problem?

  Send a print screen but don't know how?

  I have not had this laptop of all (about 2 months) and don't expect to have problems of this kind already! Any help appreciated

  Thanks in advance

  Hello

  This problem occurs because of MS Office (tails, corruption).

  Try reinstalling Microsoft Office as follows:

  1. uninstall all MS Office applications in a standard way via Add/Remove Programs, restart.

  2. use instructions and special removal tools to remove completely all MS Office applications:

  -office 2013 or earlier version: install this tool http://download.microsoft.com/download/0/e...16a296a/ork.exe, go to start-> all programs-> Microsoft Office-> Microsoft Office Tools-> Resource Kit Microsoft Office 2003-> removal Assistant, in the Removal Wizard, select 'Comepletely remove all versions of my previous Microsoft Office application' and follow the instructions;

  -for Office 2007, 2010: http://support.microsoft.com/kb/971179

  -office 2013, 365: http://support.microsoft.com/kb/2739501/en

  3. manually remove all objects listed under:

  -C:\Program Files\Microsoft Office

  -C:\Program Files\Common Files\Microsoft Shared\OFFICE *.

  -C:\Documents and Settings\All Users\Application Data\Microsoft\OFFICE

  -C:\ProgramData\Microsoft\OFFICE

  4 restart, make sure that the problem is not reproduced more.

  5 install the necessary package of MS Office.

  By clicking the Thumbs-Up is a way to say - thank you! ******
  * Click on I accept as Solution on an answer that solves your problem to help others *.

  I am an employee of HP

  #HPExpertsday

• Satellite L500-131 - error message: hard disk failure

  Hey,.

  For two weeks, I had a problem of my laptop randomly for a few seconds gel, but I didn't care. Now, when I start a strange message appear, it was like: 'save your files, hard drive failure, you need to replace.

  Help me please.

  Hi jiraiya_senpai,

  > Help me please.
  And what do we help you?

  I think the error message says it all and you need to replace the HARD drive, something is the cause of this problem.

  Is your laptop under warranty? If so, simply contact a service provider allowed in your country and ask for help. Technicians can repair it free of charge.

• CRM using SQL database in an environment of small business often inaccessible with the following error message

  Hello

  This is my first time on this forum so bear with my ignorance!  I'll expose the background of my setup and then explain the error.

  We have a small business with a server running SBS2011 and PC running Windows 8 and 8.1 connected to the server in a domain environment.

  We use a CRM product called Emu Tall that uses SQL Server 2008 R2 on the server for the database and the PC run a local application that connects to this database.

  On a daily basis, but completely randomly and sometimes several times a day, a user will try and open the application on a PC and get the following error message.

  Could not load file or assembly 'Microsoft.SqlServer.SqlEnum, Version = 10.0.0.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies. The system cannot find the specified file.

  At first, I thought it must be a matter of waiting time as it seemed to happen every morning, but I've proved since that it occurs at any time of the day and is apparently unrelated to amount of users or idle time or something like that.

  Here's another oddity that hopefully sheds some light on it. If I go to the server and open the CRM application on the server, it works very well since it is only the PC that have the connection problem.  In addition, as soon as I connected to the server of any PC can connect immediately (until it happens again later in the day).  I don't need to stay connected to the server, connect one time and close the session and he "fixed" it for a few hours for all PC users.

  I contacted the CRM vendor, and they are completely confused and have no idea what to do.

  We are trolling along at the moment with me opening a session on the server for launch launch whenever a user receives the error message but it is far from satisfactory.

  A final observation is that it does not always.  It used to work fine.  The problem began just two months ago and seems to coincide with the increase in our user from 5 to 12 users license even if the CRM provider swear that it is nothing to do with the license.  They may agree; I don't know enough to argue the point.

  Any help will be appreciated! I'm sure it will be a simple solution and someone there will know why and the answer immediately but is elusive at this time.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home