Randomize slide show (using Jquery)

Similar Questions

• Add audio to slide shows using 11 items and itunes.

  Updated to 11 items 9

  Running Windows 7

  I make a slide show and would like to add audio from my itunes library.  When I click to add audio and browse my itunes library, nothing shows after that I click on the album. In an older version, I would like to change the file to a WAV file and it would do very well.  The new itunes doesn't let me do it onlyl to an AAC file (don't know what it is) when I'm trying to say it is protected and cannot change it.  How can I add audio files to my slide show using itunes?

  Thank you

  Once, iTunes doesn't have a way to get their music in programs, as before, at least not directly.

  At the time, the workflow was to go to iTunes, create a Playlist for the necessary music from iTunes, then burn it to an Audio CD. Once this is done, we take this CD in a program like the free Audacity, RIP CDA, then Save_As WAV format, choose 16-bit 48 kHz PCM/WAV. These WAV files were imported in pre.

  At some point, they have loosened things up a bit, and many had no problem with a direct Import from iTunes.

  Now of course what they do now, but many, like using music from other sources, rather than iTunes.

  Neale has linked to a conversion request, but I've never used. OTOH, if Neale recommend it, then it should work perfectly.

  In addition, according to Adobe: http://helpx.adobe.com/photoshop-elements/kb/supported-file-formats-premiere-elements.html, AAFC is an Audio Format supported.

  As I rarely use any music from other sources, beyond SmartSound, I haven't stayed current on the operation of iTunes.

  Good luck

  Hunt

• Add a slide show using apDivs - will not focus / clashes with the images.

  Hey guys,.

  I'll be as fast and accurate as possible. I am new to Dreamweaver and I'm having a few problems in my attempts to create a Web site simple portfolio.

  I am trying to add in a base image slideshow using apDivs. I had a look online and found a few fantastic JQuery slideshows, and I ended up adapting it for use on my site;

  http://www.queness.com/post/923/create-a-simple-infinite-carousel-with-jQuery

  I have pictures in the base of my site and I wanted to add the slideshow above them (and the same thing for a couple of YouTube embeded videos too.) I added in an apDiv and placed the code for the slide show inside. This created a layer that goes on top of the image, and I am able to put the code for the slide show into it without any problems (providing the position of the apDiv has the Absolute value).

  {#apDiv1}
  position: absolute;
  top: 419px;
  left: 400px;
  Width: 555px;
  height: 480px;
  z-index: 1;
  }

  The problem I have is lining up the cursed thing. Of course, defining the apDiv absolute positioning is a bad idea, because while it was going on well in a resolution, it is not in another. I tried to change the position of the apDiv for relative and then adding changes to my code;

  {#apDiv1}
  position: relative;

  Width: 555px;
  height: 480px;

  left margin: auto;
  margin-right: auto;
  z-index: 1;
  }

  This centers my slideshow (which is beautiful), but is no longer layers on the top of the image (since it seems to work only when the position is set to absolute.) Instead, the slide show appears below the image rather than on top.

  Is there a way possible, I can keep the apDiv (which contains the slide show) centered while standing on the top of the image? As I said, it will layer on very well when the absolute value, but won't focus. When the relative value, it will center but not layer on top. It is one or the other, and I'm pulling my hair out top at the moment.

  If anyone can give any help, please Please let me know. I've included a Notepad document, including all of my code on the page (including my wacky comments) to the address below, if it helps in any way;

  http://www.box.NET/shared/5nufqc78jbg0mfkb00n5

  Do #container position: relative.  Do Divap1 position: absolute and adjust high/left to place values in the container you want.

  (You realize one) your page is too wide, and b) there is no content on the page, right?

• Customize a slide show using the images of several different themes.

  I downloaded several themes for Windows 7 and can change between them. What I want to do is to create a custom theme using the photos of the themes that I have. In other words, chosen pictures of the Germany, the United States, the Bing and themes Aero to a custom theme.

  Now what I get from the help files, is that, to do this, I need to have all the photos into a single file. It's not a problem, but for one thing. I can't FIND the pictures of the theme. Properties on the photos don't show their location, and they are not saved in the folder my pictures.

  Research of the pictures showed thousands of back, it's not a viable option.

  How to find pictures of the theme?

  Hello mac173173,

  Thank you for visiting the Microsoft answers community.

  In addition to the these suggestions, you can also go into Desktop Backgrounds under each theme and make a copy of the images you want to set up, and then select the images for the Undertow.

  -Right click Desktop > click Customize
  -Click on desktop background > right click on each image you want to save > select make a copy (place the copy in a folder in your library of images that you want to use)

  Repeat for each image throughout each theme. The select images to include in the background slide show.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to open/start a slide show using a button on the home page?

  Hi all. I want a slideshow on the homepage of my site for graphics, but ideally, I want that it pop up "in place" If a button is pressed (these buttons are for things like 'illustration', 'design impression', 'logo design' etc, with each being a portfolio of images slideshow.) Is this possible to do? So instead of buttons each link to their own page, they link to a slideshow that is displayed on the screen?

  Let me know if you need more information.

  Yes, you can design it.

  Use any composition, trigger can be used as button that would open the container to the click. Into a container, insert slide show with images.

  Images used may be related to their specific pages.

  Thank you

  Sanjit

• The slide show using as a model

  Hello everyone.

  I created a slide show. It contains 20 Images and I have applied different effects and changes different. Such as opacity and scale.

  I would use this slideshow for my next Photo Shoot project. In other words, use this slide show as a model, I can apply my next pictures in this slide show.

  Technically, replacing all old Images with my Images News

  How can I do?

  Thank you very much.

  Only if they have the same name. You can set up a naming convention and a folder structure then use Bridge to rename your images then just drag the images famous in your project folder and the. Open AE. As long you keep the right files is the simplest way that doesn't involve advanced scripts.

• Impossible to burn a DVD slide show using Windows DVD creation

  I want to burn my DVD/slide show.  He asks me to put a DVD into drive E.  I did it and it does not burn the DVD.

  I want to burn my DVD/slide show.  He asks me to put a DVD into drive E.  I did it and it does not burn the DVD.

  ===============================================
  What happens when you click on "burn"? You receive an error?

  Perhaps the following links will propose a few ideas:

  Windows Vista - Windows DVD Maker
  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

  Windows Vista-
  Creating Windows DVD
  Burn a video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista-
  Change Windows DVD
  Settings of the DVD - Video Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Windows Vista-
  Video DVD burning:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Slide show using fake image

  My slideshows full screen shoot image I have the link to open the show instead of the image that I have in the actual slide show. It happens again and again.

  My site is veronennis.com and the paintings section is having problems. When you click on this link from this page, a complete image of a 80 "wide paint should appear and it is rather the culture from the button on the previous page.

  I downloaded this muse gain model. Any suggestions?

  You should ask MuseGain.

• Photo slide show/t430

  I have a T430 with Windows 8.1. What is the best way to view my pictures in a slide show? There is no 'Media Show '.

  Thank you.

  Hello

  Welcome to the Community Forums of Lenovo!

  When you click on the mosaic of photos on the home screen, you get to choose from several libraries of images, including the one on your computer. From there, you can browse folders and look at the pictures you want to view.

  To start the slide show, click anywhere on the screen and select slide show near the bottom right.

  Once launched, you have control over the slide show. By pressing the bar space is paused the show. The left and right arrow keys will take you to the last or next photo. To start it again, right-click on the screen and click again on the slideshow icon.

  See here for how to start a slide show using windows photo viewer.

  I hope this helps!

  Best regards

  Mithun.

• How to adjust the date of transition of the slides in a slide show created in Windows Media Center

  I tried to set the time of transition from slides in a slide show using Windows Media Center. I went to the period of Transition, tasks, settings, photos and the value 3 (seconds, I presume). Saved settings. Burned DVD. Slides are still in transition to about one every seven seconds, same as before. Put forward that I changed it to 12, by the way. Even then, the time of transition seems to be about one every seven seconds. I'm doing something wrong? I want the transition period between the slides only 3 seconds. Where it's important, my slide show also has music. I use Windows Vista.

  Hello

  Try to check and clean the boot:

  Here is the link:

  http://support.Microsoft.com/kb/929135

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-video-and-watch-pictures-in-Windows-Media-Center

  It will be useful.

• Slide show not on autoplay

  What can I do to have a slide show of my photo cd?  It is not an option on AutoPlay.

  Hello

  Unfortunately, you can not slide show as an option of AutoPlay. Browse the links below that provide more information about the automatic run settings.

  Change AutoPlay settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  However, you can create slide show using Windows Photo Gallery to create a slide show. More information you can check out the link below.

  Windows Photo Gallery
  http://www.Microsoft.com/Windows/Windows-Vista/features/photo-gallery.aspx

  
  See the photos as a slide show
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-pictures-as-a-slide-show

  Concerning
  Anthony.

• The main show of market order is not the same as shown in the picture slide show

  Hello

  I have a portfolio of 24 images, to which I add, remove, and rearrange. When I re - organize the images in the slide show using the thumbnails, the new order of the image does not appear when you click the slide show from the main image. The order in which the images appear in the slideshow seem random, however I think that the image retains the miniature position, it originally received when adding to the slide show. For example, the first image, I've added moved to position five in thumbnails but the meter indicates his number one. I tried to change the meter manually, but it is up to the original number.

  http://gemgraphics-testcouk.BusinessCatalyst.com/index.html

  I would like to the slideshow and the meter to match with the positions of the image in the image.

  The thumbnails are organized into four columns six rows and the slide show, I would like to start at the top left, row by row, from left to right.

  Help appreciated, thanks

  Can you see the answer of Zak in this post changing slide show command and check to see if that gives you additional hints for troubleshooting?

  Also, take a look in the layers panel when you are reorganization of images.

• Slide show: no skip option more?

  I am a wedding photographer and want to show my photographs using the slideshow function. The amount of pictures is sometimes more than 400 and Lightroom 4A

  a 'skip' option so that not all photos need to be "prepared" first before to start the slide show (sorry... I'm Dutch and I hope make me understand). This option is over now and it takes one hour before the show actually starts.

  Of course, this is not what I want... Am I missing something somewhere? Can anyone help?

  Kind regards

  Robert

  Miss me it too much!  This is a big drawback of LR 5.x - for me I find it almost as fast to export to JPEG and then display the slide show using photomechanical.

• Slide show is displayed in the sidebar

  I created a slide show using bridge.

  I inserted the slideshow in an iframe in a DIV inside the main_content of a column of two fixed, page on the left sidebar, header and footer html.

  See the runs and sounds great the local test using IE, Firefox and Chrome.

  When I download and test the entire slideshow on the web server live, moves out of the apparent area of the main content. It appears below the left sidebar, a bit far from the right edge of the main content area.

  John,

  Thanks for the reply and I feel stupid for forgetting a link. However, I just fixed my problem with a clear = setting right css for the maincontent div.

  I don't know what happened, that it be updates to the browser or something got corrupted in the site. It had been fine for a few years and then a problem. Anyway, maybe it helps someone else solve a similar problem.

• To navigate in the slide show with the arrow on the keyboard?

  Why does not by default? Is there a way to get there? I don't see in the controls. My client wants as its visitors of the site to browse through several galleries created by slide show using only the keyboard left and right arrows. This seems like it should be available.

  Another quick point to mention is that if instead you want to remap as another game of such keys WASD or map their soft screen buttons (who reside in another layer for the slide show or anything else!) - the code for this widget is very short and easy to reproduce. That's not immediately obvious what license freeware widget is distributed under don't post code here, but find it as follows:

  1. place the widget on the new blank page in white new site

  2 page preview in the browser

  3. in chrome, right click and select inspect element (use of similar function in your browser of choice if it is not chrome)

  4 script is 6 lines under

  7. replace keycode 37 and 39 who are left and right respectively with your code for your key you want to tank the Codes Javascript (Key Codes) - search of Cambia

  8. Paste the code into the html code with:

  9 test it!

  Hope that is helpful in general