Rate of attenuation Snr E1200

Hello everyone, I wanted to know how to access information snr and mitigation of this router, I tried with: http://192.168.1.1/setup.cgi?next_file=adsl_driver.htm , but it gives me the error.

Do you have any advice?

Ok thank you

Tags: Linksys Routers

Similar Questions

  • Looking for guidelines SNR for upper 802.11n (150 Mbps and 300Mbps) of data rates

    Is anyone aware of any directive of Cisco and/or observations on the ground for 20 Mhz (single channel) 150Mbps 802.11n 40 Mhz (dual channel) 300Mbps deployments and deployments?  If they vary also freq band. (2.4 or 5.0 - does not intend to make 40 Mhz to 2.4 Ghz).

    Also, if anyone is aware of any 802.11n design guidelines / planning guides (preferably Cisco) with some rough points square guidelines for generic, Interior carpet environment office (similar to the PA 1 through 10,000 feet square for the data base/light and 1 PA by 3,000 feet square for VoWLAN), but for the 802.11n which would be appreciated.

    Is enough to remind me about the need to conduct a site survey - and I realize that these figures will stretch based on the environment - looking for instructions and values of the signal, if published.

    In addition, it is understood that different customers may have different sensitivity - no need to go either

    Especially try to find some guidelines rough values published for planning purposes.

    Thank you

    John

    Not sure if you are still looking, but it is the reference in the CUWSS quick reference Guide.

    Conditions of accreditations RSSI/SNR
    Data rate
    20\40 MHz 2.4 GHz Min RSSI 2.4 GHz Min SNR 5 GHz Min RSSI 5 GHz Min SNR
    14.4\30 -82 11 -79 14
    28.9\60 -79 14 -76 17
    43.3\90 -77 16 -74 19
    57.8\120 -74 19 -71 22
    86.7\180 -70 23 -67 26
    115.6\240 -66 27 -63 30
    130\270 -65 28 -62 31
    144.4\300 -64 29 -61 32

  • calculation of the SNR/CRADLE to the real-time signal

    Hello everyone,

    I need to calculate SNR or BER of the signal received in real time. I use USRP 2920.

    Hey IrfanRazzaq,

    You may be better to post this question in the USRP forum:

    http://forums.NI.com/T5/USRP-software-radio/BD-p/500

    I also want to point you to these forum posts that deal with this issue:

    http://forums.NI.com/T5/USRP-software-radio/example-VI-for-calculating-ber-of-the-USRP/m-p/3048995

    http://forums.NI.com/T5/USRP-software-radio/USRP-for-bit-error-rate-measurements-using-packet-based-...

    There is also a VI in the modulation called MT toolkit calculate BER that takes a signal and a desired profile and returns the BER

  • E1200 low speed wired & wireless through L2TP

    I have the L2TP connection. Without the router, just cable, I have 35 MB/s download and 70 Mbit/s upload.

    Through the E1200 wired & wireless, I get a huge download speed 5-14 Mbps.

    I have the latest firmware and I reset it after the update.

    I read a lot of information about it and a lot of people write that this router just can't handle the gear through L2TP.

    Is this true? It could be fixed?

    If you get only 5-14Mbps download speed via the router, which is so far beyond the rate without it, I must say that the router has problems. You can try to lower the MTU settings to 1460, and then do the test using speedtest.net.If that does not solve the problem, I suggest getting a new router, preferably a one gigabit.

  • Adjust margin SNR on Cisco SRP527W-U?

    I have a new srp527w-u Cisco router which works fine even if it is the synchronization at a lower rate than my billion (6 Mbps vs 8.5 mbps for billions on the same line).

    I had twisted the way billions back to connect with a 4db SNR margin, and almost certainly, that's why it has the highest rate (by comparison, the cisco is synchronized with a 12 dB snr margin). Is it possible that I can configure it to use a SNR margin? I know that this could reduce the stability of the connection but I would at least be able to give it a try if possible.

    Thanks for any help!

    Hi Louis,.

    This level of configuration is not possible with the SRP500.

    Andy

  • Export records of heart rate

    In 2008, I studied the heart rate, swimming speed and the time relationship developed software to assess the effects of the training. At that time, we needed a HR-band, a receiver and sensors to record the lap time. It is now all integrated into the new Apple Watch. So, I just want to have access to the times and HR to see if I can resurrect the MatLab routines...

    What I need is access to the times and human resource records. (I hope they have a timestamp, so I can sync the two).

    Question:

    How can you get access to registered swimming times and recorded heart rate?

    I thought it was possible health app (iOS9) but I can't find the option to export in iOS10?

    Tips appreciated... Thanks in advance.

    For any consultation on iOS 9, in the application of health tap data on health > all, which has an icon of the top export which saves files xml inside a zip archive. This is perhaps similar to iOS 10?

    P.S. I read that on the Apple Watch heart rate data were inaccurate, while swimming so let us know if you have good data about him.

  • Hours of permanent reminder and heart rate monitor

    Hello. I had already updated the Apple Watch 1. Watch generation OS. 3 everything was OK. With the iPhone change 7 I have problems of size.
    The memory of the hours of stands is no longer works.
    The heart rate during the Trinings works only partially.
    The active cal are not partially counted.
    When I pick up the clock briefly during the workouts or so to invest again, the pulse measurement works again and display generated calories.
    Does anyone have any idea why this may be?

    Hello

    The following steps may help:

  • How to put in the front of the watch during swimming to see heart rate

    Received the Watch 2 day and taken for a swim practice in the pool (of course)

    happly to see enough faithfully has towers and gives average heart rate but only AFTER training

    I wanted to 4000 m (and I fact..) but from the exercise the watch when asked for the total calories to burn.

    QUESTION 1: how to set the distance (rather than calories)? At the start of the year?

    While the dial of the watch training appeared when out of the water and gave the number of laps, total distance, total time of exercise and calories burned.

    QUESTION 2: you can change the information presented during the swim to see heart rate? (Rather than the number of Calories predictable)?

    NOTE

    For swimming training, the watch is a bit disappointing, given that in the swimming training, you normally do a few repetitions as 10 x 100 start each 01:30 or 01:45. I normally use the watch of Garmin swimming to take the time (100 m start button and press again on arrival) of the clock, then briefly shows duration of the tour and afte 4 continuous seconds so you can see when you start again (e.g. to 01:45). I hope that there will be a third-party solution soon for Apple Watch 2, while I don't have to swim with two watches...

    Hello

    1. After selecting the length of the pool, slide laterally on the screen to move to a distance goal, which can be set in meters or yards (firmly press the screen to switch between them).

    2. follow the following steps to customize the information displayed by the application of training during your workouts in the pool swimming:

    • On your iPhone, in the application of the watch, go to: Watch My > training > training view.
    • Choose several metrics.
    • Tap pool swim > press on edit (top-right) > select up to 5 parameters, including heart rate (they can be arranged in your order of preference).
    • When you are finished, tap on Done (top right).

    More information:

    Work with your Apple Watch - Apple Support

  • App for Apple Watch series 2 allow the use of heart rate, gps, and manual splits?

    I run about 60 miles per week and I plan to change my Garmin Forerunner 620 for a series 2. However, it would be totally useless to me if the watch does not intermediaries, as many of my workouts are pretty accurate. So, is it possible for me to intermediaries on the watch, and when looking at the splits also see the GPS info and heart rate for the said stock split?

    Hello

    To mark a segment (for example one lap) during running exercise using integrated workout app, you can double-click the screen. The display briefly shows the stats for this segment. Segments can be examined after training through the activity on the matched iPhone application:

    You can see that an application of third party best suited to your needs.

    To learn about the characteristics of third-party applications, I suggest you consult the descriptions of app developers and their support resources. For example:

    If you don't find the specific information you're looking for, you can ask the developer directly. This is usually possible through their support resources (you may need to create a free account in order to be able to connect). They may also be open to feature requests.

  • Apple Watch: How can I get my heart rate to show the application of fitness?

    If I use the fitness app in shape and choose 'Other' for my workout, it shows my heart rate. But if I select 'Run in the open air' or "Walk in the open air" it does not show it. Is there a way to get my heart rate visible without having to leave the app to fitness and pull up on the application of the heart rate? It should be possible as the option 'Other' discount-shaped poster. I was hoping that the new update would automatically as in, but alas, it isn't. For those of us who want to run in a particular range of heart rate, it would be crucial. Fitbit wife t - it? Why not my dear remarkably Apple Watch?

    Help here > your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  • music of iOS 10 How can I rate songs?

    With the upgrade in IOS 10 I no longer can rate my songs in the iPhone I was doing.

    I don't find a way to access the stars of the song. Can someone help me?

    You can't the feature has been removed. It's a disaster!

  • heart rate alarm

    My quest for this question has resulted in answers for original 2015 watch/OS so I wanted to ask you again see if something has changed with the new series 2 and the latest OS.

    I'm looking for an alarm function on the Apple Watch who notify me if my heart rate exceeds a certain level.  This could be from the BONE, or a 3rd party application that runs on the watch (and he can't function without my phone).  It looks like such a feature useful for physical training and medical emergencies that I would not be surprised that someone has not implemented it. but my research has not given anything whatsoever.

    Hello

    Heart rate alerts are not currently available as built-in iOS or watch OS feature.

    Also note that Apple Watch, heart rate sensor and the apps included Apple Watch are not medical devices and are intended solely for purposes of fitness. They are not designed or intended to be used in the diagnosis of disease or other conditions, or to cure, mitigation, treatment or prevention of the disease.

    You can find the application third-party following (for example) of interest:

    • HeartWatch
      • The developer recommends:
        • "NOTICE: you can set up notifications for the following scenarios: what heart rate exceeds a value of bpm, when heart rate is less than a value bpm."
        • "NOTE: because your health is encrypted, store iPhone notifications only available when your iPhone is unlocked." This occurs in the background when you use your iPhone in an unlocked condition for any purpose, so in practice, you will be alerted as long as you regularly use your iPhone. »
      • https://iTunes.Apple.com/us/app/heartwatch.-view-get-notified/id1062745479?Mt=8
      • http://heartwatch.tantsissa.com/home

    More info (not a medical device):

    https://help.Apple.com/watch/#/apdcf2ff54e9

  • Can I pair headset Bluetooth and a chest strap heart rate monitor Bluetooth at the same time with the Apple Watch 2 series

    Does anyone know if you can pair Bluetooth headset at the same time and heart rate monitor strap chest Bluetooth with the Apple Watch series 2? I can't find any info about it online. I hope so, because they have everything works without your phone now since it has GPS. Obviously a chest strap heart rate monitor gives you a more accurate reading. And who is running without music? If they want to really all the new capabilities of fitness improved series 2, that this is a must!

    The original WATCH allows you to do this, so I don't see why the series 2 would not.

  • Apple heart rate monitors

    What is the HR of Apple from Garmin or Polar precision for cycling?

    Hello

    Consumer Reports tested the sensor frequency heart Apple Watch against their dedicated Recommendations cardiofrequence-meter and have 'no difference' between their reading:

    http://www.TechnoBuffalo.com/2015/04/27/Apple-watch-performs-well-in-consumer-re ports-tests.

    Apple has not announced any change in the sensor for the models announced recently.

    More information:

    Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

    https://help.Apple.com/watch/#/apdcf2ff54e9

  • Accuracy of the resting heart rate

    What is the accuracy of the new Apple Watch to record heart rate at rest?  This will be my main app for the watch.

    Hello

    Consumer Reports tested the sensor frequency heart Apple Watch against their dedicated Recommendations cardiofrequence-meter and have 'no difference' between their reading:

    http://www.TechnoBuffalo.com/2015/04/27/Apple-watch-performs-well-in-consumer-re ports-tests.

    However, note that Apple Watch, heart rate sensor and the included applications are not medical devices and are intended only for fitness purposes. They are not designed or intended to be used in the diagnosis of disease or other conditions, or to cure, mitigation, treatment or prevention of the disease.

    More information:

    Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

    https://help.Apple.com/watch/#/apdcf2ff54e9

Maybe you are looking for

  • Backflip: The data plan cover MMS and everything?

    So yes, I called at & t and got my issues of developed data, thanks to those who helped...

  • How can I change the language on my MSN email?

    My email address has been hi-jacked by someone in Thialand - he changed a lot of English words and I don't know how to change the language of return English - also since most of the legends are in the Eastern language - how can I be sure that I'd be

  • Open a video and play

    "I know that this topic is already on a topic, but I have a problem with Labview .vi all that I want to open write an end of file error" the file... then be loaded. So I do a .vi to open a video in labview with WMP, but it does not work. The error is

  • Conversion from an old file of database 2001

    Microsoft Open XML converter program open an old database file called "database.ddb" created in 2001 can be used with a current research program called "Anakiv7.1?" Suggestions appreciated. Herbaceous plant.

  • Insert a disc recordable is not an error message recordable DVD when burning a DVD in DVD maker on Vista

    What happens when I try to burn a video to a DVD once I burned just a video for this DVD. I have tried on three dvd now and I can't burn a video on the dvd, but then when I try to add a second video on the dvd - r Verbatim DISC I JUST GET THE MESSAGE