Rating of the NEF and JPG only once in Lightroom

Similar Questions

• New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I have

  New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I get a message that says no. Photos import active.

  This means that you have previously imported these pictures/videos into Lightroom, and you must not (and are not allowed to) import them again.

  Go to your library Module (not the import dialog box) and find the photos, then you can make use of them in any way you want in Lightroom.

• A repeating region: display the entries of dubble only once

  I want to do a Recordset where all the 'cities' are shown only once, it should not be like

  The Hague

  The Hague

  The Hague

  Rotterdam

  Rotterdam

  Amsterdam

  But:

  The Hague

  Rotterdam

  Amsterdam

  This is the recordset object:

  SELECT c_city FROM canteen

  It's the repeat region:

  <? PHP {? > <? php echo $row_allCities ["c_city'];? > <? php} while ($row_allCities = mysql_fetch_assoc ($allCities));? >

  Thankx for any help!

  Add a SEPARATE statement to your application.

  SELECT DISTINCT c_city canteen

  --
  Lawrence * Adobe Community Expert *.
  www.Cartweaver.com
  All Shopping Cart Application for
  Dreamweaver, available in ASP, PHP and CF
  www.twitter.com/LawrenceCramer

• The initialization Code: run only once at T = 0?

  Hello
  
  Is it possible to run some ActionScript only once at the beginning of the flash application?
  
  There are GIFs that I need to download dynamically from the server that once that will be used on the buttons. When we go to another scene and return, the GIFs are downloaded again.
  
  Thank you
  FG

  #initclip and #endinitclip must be applied to a movieclip. If this movieclip is on stage as part of the _root timeline and governing has played more than once, your code initialization, attached to the timeline of the movieclip would run only once.

  Anyway, there are some easier ways to accomplish what you want directly. for example, the following code in the conditional runs, at most once little matter how many times the frame is played:

• the event structure cannot combine with other events and run only once

  Why it will always get stuck when I combined the 'new user add' event to the event of 'Login '?

  It works for me when I separate the two, but the 'Add a new user' button can work but only once for the structure above, program will be blocked on the second time that I press the button "add a new user".

  

  It has already been said, you must use that a single structure of the event and not 2. Also, avoid using local variables (better store data in a shift register and not in an indicator) how you do it, it can cause bad racing conditions.

  Actually here you just don't another data storage since you have a file. Don't store data file to the root of the C drive, you do not have write permission. Use the default data folder or the folder of the application.

  I have attached a simple example. I guess that's a work at home? Please make my account help: try to understand why your VI does not work and try to find a solution by yourself. Modify my sample and play with him. This is how you learn LabVIEW. If something is not clear, post here, and we can explain/help.

  Edit: has the 'connection' event, I don't check against whether the file exists or not. Difficulty of this part, gives too little practice.

• Haw to find the element in the table that appears only once

  I have a table like this 2d:

  1 2 3 4 5 0

  5 6 2 4 7 2

  8 3 6 0 9 4

  5 6 7 7 3 2

  And I need to find items that appear only once in this table

  In this case, 8 and 9

  I also need this elements (row and column) position

  Are integers

  I tried to remodel the table and use the find but no result.

  Your best bet is to remodel a table 1 d do your seaching and use 'Quotient & rest' to convert location (index) in the table 1 d back to the index in table 2D. Use "Array Size" to get the number of rows and columns of the table 2D.

  The histogram only works on 1 d arrays.

  Or reshape a 1 d table. For each digit (0-9), use 'Search 1 D Array' twice. If the first 'search' finds a match (does not =-1), use the offset to start the 2nd search beyond the 1st index discovery. If 2nd 'search' returns-1, then one and the SAME time happens

  The index of the first 'search' to calculate the index (Quotient & rest") line and collar of the 2D array.

• Problem with "Scripts" to convert the NEF to JPG

  Hello

  I'm trying to batch naves convert to jpg using file > Scripts > processor of images, what I did before, but when I click on select file to select files NAVE of the memory card, Photoshop does not recognize the NEF files.

  Photoshop is grateful the NEF files in the case opposite and if I click on "Save as" and save it as a JPG file, it works, but it's a lot of work to save more than 500 images...

  Any suggestions?

  Thank you!

  There are also some problems with photo, download maps of the camera. I would like to move the files to your computer to convert their use you BONES to move them.

• I tried watermark 164 images in a single folder. I run the action and then only 12 images are filigranées. Help. What is going on?

  I tried a number of images to watermark. Once the batch is executed only ever I have 12 frames a watermark.

  I've done it before without any problem.

  The action works because 12 images are always a watermark in the appropriate folder.

  Is there a commonality with the images filigranées with success, as the size of the image, image etc format?  Is there something different about the images failed?  They are all flat jpg?

• Captivate 8 widget printing does not print in landscape. impressions full resolution of the project and not only the certificate?

  I'm new to Captivate and am responsible to learn how to use Captivate 8.  I must add a certificate of completion at the end of my project and have a lot of questions for which I can't find answers! Please, if anyone can answer these:

  (1) I don't want the certificate to print up to that score the quiz reaches a specific minimum - for example, you need a score of 80% or more to print a certificate.  How do I do this with the print widget?

  (2) the certificate to print without the slide background and resolution of the project - in other words, I want only the image of certificate (with text added for name box) to print in LANDSCAPE, without the user having to do all the settings on their end (choose the landscape to portrait with their printer).  How is this accomplised?

  (3) I want a date on the certificate - how can I add this specific item?

  Without a widget of certificate and the use of Flash with this version, I'm confused as to how exactly Captivate offers the ability to print certificates?  I don't know of HTML5 and am uneven with Javascript.  Why a feature such as certificates and the ability to print them would be something illegal?  No tutorials, no clear advice exactly get this popular feature of development of training material.  Me think there should be MUCH easier to achieve, but I am confused at this point.

  The solution I found is this:

  Do not use the printing of 8 Captivate widget. It simply does not work the way it should be able to work.  Unless you are able to scripts in Actionscript 2.0 and have access to an old version of Captivate, there is no way to work around this bug.

  The problem I found is 8 Captivate will allow you only to use Actionscript 3.0 in Flash; You can open the widget in Flash, but you MUST open through Captivate first if you intend to use in Captivate.  So, once you open the widget for adjustments through Captivate, it automatically selects AS 3.0 as scripting language to use, no choice is available.  IF you have Captivate 7 or less, however, it allows you to script in AS 2.0.  I didn't, so I can't help you in the widget script.

  What I ended up doing was, I made my own certifcate in Photoshop, saved as a. PNG and added to the last page. Using the internal encoding of Captivate I said the program just go to slide if the quiz was successful.

  Print: Go to the fenΩtre > Skin Editor.  On the left are boxes to check the playback bar options - check out 'Show the Playback Control' and then choose your theme. In the drop-down list, choose 'print '.  If you don't want to do anything else on the playback bar, then select the items; Choose where you want the PlayBar to show (I chose the bottom and down to the Center). See below:

  

  You can see the icons on the bottom, in the Center.  The icon on the left is the button print.  It works well, it can be to make choices print in your local print dialog box.  I have to tell him of the landscape print, for example, otherwise, it prints portrait and too small.  But this does not work, and it solves the problem of non-working widgets impression.

• Is there a way to limit the volume and not only for music?

  Hello

  I have a child who loves the max volume. However, it is not only bad for his ears, he pushes the rest of the family crazy.

  As much as I saw him, he has no control master volume where you can limit the volume - that it JUST for music, leaving the rest of us stranded.

  I tried mental health of volume app, but since it's an app, it can be disabled without a password and so my child understood how close. So that one does not work.

  Anyone know of another way to limit the amount of EVERYTHING?

  Hi Makkapakka777,

  I understand that you like to limit the volume on your iPad so that it cannot be increased beyond a certain point. Fortunately Restrictions allows you to set a volume limit that requires an access code to remove. The article below the link provides more information about the configuration and use of the Restrictions.

  Restrictions of use on your iPhone, iPad and iPod touch
  https://support.Apple.com/en-us/HT201304

  Kind regards!

• the animation code runs only once

  Hi all

  import bb.cascades 1.2
  
  Container {
      Container {
          layout: StackLayout {
              orientation: LayoutOrientation.LeftToRight
          }
  
          Label{
              overlapTouchPolicy: OverlapTouchPolicy.Allow
              text:"Initial Text"
              minWidth: 600
              animations: parallelAnimation
          }
          Container {
              overlapTouchPolicy: OverlapTouchPolicy.Allow
              layout: DockLayout {
  
              }
              ImageView {
                  overlapTouchPolicy: OverlapTouchPolicy.Allow
                  imageSource: "asset:///images/hotels.png"
              }
              ImageView {
                  overlapTouchPolicy: OverlapTouchPolicy.Allow
                  id:imgsource
                  imageSource: "asset:///images/hotels.png"
                  opacity: 1.0
  
              }
          }
          gestureHandlers: TapHandler {
              onTapped: {
                  if(parallelAnimation.isPlaying()){
                      parallelAnimation.stop();
                  }
                  parallelAnimation.play();
              }
          }
  
          animations: [
              ParallelAnimation {
                  id:parallelAnimation
                  TranslateTransition {
                      id:translate
                      toX: -20
                      toY: -300
                      //duration: 1000
                  }
                  ScaleTransition {
                      id:scaletransition
                      toX: .2
                      toY: .2
                      //duration: 1000
                  }
                  FadeTransition {
                      id:fadetransition
                      toOpacity: 0
                     // duration: 1000
                  }
  
                  onEnded: {
                      console.log("On ended parallel animation");
                      translate.toX = 0
                      translate.toY = 0
                      scaletransition.toX=1
                      scaletransition.toY=1
                      fadetransition.toOpacity=1
                      //parallelAnimation.stop();
                  }
              }
          ]
      }
  
  }
  

  I made the image to translate into original poision in onEnded ParallelAnimation but its not working. The label is visible only after tapping the container again. And further taps plays not the animation.

  Please help me with this.

  use a sequential Animation:

  first run your ParallelAnimation

  then the following reset of translations

• How can I keep the laptop and find only the external monitor when I close the lid?

  Original title: external monitor

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  Hello

  Perform the following steps.

  1. press the Windows key + X to display the System menu.

  2. Select Control Panel.

  3. Select the Power Options.

  4. in the left menu, select Choose closing the cover .

  5. look in the section of power and sleep buttons and lid settings .

  6. use the drop-down menus of the section when I close the lid , and then select do nothing for both options.

  I hope this helps.

  Concerning

• hide all the clips and reveal only those you need

  Hello

  Is there a way to hide all unwanted movieclips and reveal only those you need?

  From my understanding, if I don't want a particular movieclip on the stage, I'll use

  Scene1.visible = false;

  but it gets very complicated when I have different scenes appears at the same time, so I need to

  Scene1.visible = false;

  jungleScene.viisble = false;

  zooScene.visible = false;

  gardenScene.visible = true;

  Y at - it something like a scenes hideall and reveal only those that I need?

  Yes:

  function hideAllF(parent_mc:MovieClip):void {}

  for (var i: int = 0; i<>

  parent_mc.getChildAt (i) .visible = false;

  }

  }

• Solution for a rotating banner that plays the .flv and .jpg

  I am looking for a solution to create a banner of website that can play .flv files with .jpg. I have several extensions to Dreamweaver for galleries and banners XML, but none can play multiple files .flv and .jpgs.

  I need the banner to start with a static .jpg file and then fades to a .flv file, another .flv file, then a file .jpg for the final frame, change every 6 seconds or more. I use Dreamweaver CS3.

  I couldn't find any Dreamweaver extension that could do this... maybe possible using behaviors in Dreamweaver / javascript?

  Any help is greatly appreciated! Thank you!

  Here is a publisher of flv free, simple, allowing you to cut and save/delete the rest of the file without having to re - making the video:

  http://download.CNET.com/Moyea-FLV-editor-Lite/3000-2168_4-10912717.html

  Of course, if you are planning more complicated changes, you have a more robust program.

  Make a conversion and then re - a double whammy and may lead to a big loss of quality but also more time.

  . FLV is just a container format and not a 'video' format, it might be better to just break the container and offset the .avi or mpg located inside, rather than do a conversion and the potential loss of quality. Here is a good little utility for this:

  http://Moitah.NET/

  FLV Extract... I have used a number of times and find it very convenient.

  Don't forget to plan this out... get the exact pixel dimensions you will use in your banner. If it's short and wide... This means that you may need to "reframe" the video. Download all your dimensions figured out in front if you do not mismatch later.

  Good luck

  Adninjastrator

• Out problems with the purpose of transparency on the PDF and JPG - CS4

  I have a problem, save PDF to a file that has a square of 100% black CMYK with blur effect and it has an effect of multiplication on a gray white/blue rectangle. I wanted a simulation of the simple, similar shade that I use sometimes with white gradient / black + multiply.

  But, as I saw it in many other versions of this ad, that I'm working on them objects of white or white/gray gradient (rectangles, text) simply disappear on the PDF output. Sometimes it disappears entirely, other they appear incomplete by the measurement of the object "multiplied" above him.

  I have this problem also sometimes in transparency the value multiply on back/white gradient in a light background.

  -Pixelate effects are set at 300 DPI

  -Document color setings are CMYK

  -All the black or white in this case are 100 %K or 0 %K on CMYK

  -Illustrator CS4

  Here's a curios thing: when a white game on CMYK not 0.0.0.0, but 1.1.1.1 the problem disappear! As it does if my black is 100.100.100.100.

  But, of course, I have my file to an output log and want to go to the right, with my 100% black for the record on the right.

  I tried:

  -All mentioned pixelation in Illustrator and then saving a PDF file

  -Export directly from Illustrator

  -Flatten the layers and save as PDF

  -Record in EPS (CS2) and then the distillation on PDF 6.0

  -Import of AI on Photoshop and then saving a JPG file - it worked, but I want a PDF file for a better quality of text

  Anyone?

  Try to turn on/off the preview overprinting mode > overview of overprinting in the illustrator file. The Illustrator file looks like the PDF file when you turn on preview overprinting? If this is the case, you will need to correct overprinting objects so that they will knock out.