Satellite Pro 6000 - horizontal line on top

I have a problem with my toshiba Pro 6000 1.2 Ghz, since I installed the new bios or new drivers windows Toshiba video.

In fact only 6000 has a screen of 15-inch (and not the 14-inch), and when I start it up I see everything, but with a horizontal line at the top of the screen (which change color, can be white with text mode, being black or blue under windows, etc.). The text screen is pressed by about 2 cm from the edge in text mode (during booting, for example.) Red logo Toshiba at the beginning).

It seems that the Bios (or pilots, but I do not think because that's also how during startup) does not correctly handle screen 15 inch laptop computer. I installed the version 1.60 of the Bios. I don't remember the version I was using before.

If I install a 14 inch screen, I don't have the line and I don't have the text squeezed by 2 cm from the top screen.

According to me, but I'm not sure that the problem is not hardware, but more by a software problem (I hope).

Thank you in advance.

Jan

I don't know if it will help, but in the BIOS, you will find an option called «stretch LCD Display»
Try to disable or enable this setting

Tags: Toshiba

Similar Questions

  • Satellite Pro M10 - horizontal lines on the screen in different areas

    Hi all

    I hope someone can help.
    My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
    It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
    The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

    Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
    A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
    I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
    Perhaps a cooling problem? Or problems of motherboard?
    The motherboard has been replaced twice, hoping that this isn't another mobo problem.

    Any advice would be great.

    Thank you.

    Hello

    I m not 100% sure but to me it looks a bit like an overheating problem
    Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

    I wonder how you were able to replace the graphics chip on the motherboard?  :|
    If I m not wrong not the chip is fixed and the replacement is very easy and difficult

    It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

    Sorry, but that's all I can suggest.

    Best regards from my friend

  • Satellite P845-Canada-10J - HDMI to TV - horizontal lines from top to bottom

    During video playback through HDMI to my TV, I get horizontal lines from top to bottom.

    I tried to change the refresh rate, change the cables, evolution of videos of different ports and video and all players the same. I have a Hannspree 32 inch 1080 p which supports 50 Hz and 60 Hz.

    Any ideas on how to fix this?

    and are not the same visible lines on another screen or internal monitor?
    Laptop Satellite P845-Canada-10J seems to also support the RGB (VGA) port you could try connecting the monitor to this port just to check if the same lines are visible using another video interface

  • Satellite Pro 6000: display or graphics card problem

    Hello
    I don't have a model satellite pro 6000. PS600E-01NYE-FR
    1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

    I understand that it is an old laptop but had been treated with great care because I got it.
    My problem is the following;

    Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
    a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
    but nothing is readable, at all.

    I tried to run a yellow one also using the video output external monitor, all appear the same.
    a computer display (although I can't check it out) to freeze.

    I replaced the heatsink fan as a precaution (using the new dough)
    the only solution I can find is replaced the ram with
    2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

    Thanks in advance
    Display Toshiba SP6000 (?) Problem

    I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

  • Satellite Pro 6000: video controller - driver compatible vga

    Hello

    I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
    That's probably because my video controller is not installed, but I can't find a
    Driver video controller for a 6000 SP. My OS is XP.
    Can someone help me?
    Thank you

    Hello

    You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

    By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!

  • Satellite Pro 6000 won't start or do something

    Hello

    My satellite pro 6000 stopped working all of a sudden.
    Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
    Also tried the back button back in case but no tip was not all good.
    It just won't start at all.

    Any ideas out there?

    Thank you

    [Edited by: moderation of the Forum]

    Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

  • Damaged BIOS 1 - Satellite Pro 6000 block

    Hi all

    I bought a laptop, a Satellite Pro 6000, but after a few weeks, he refused to start and gave me the bios message 1 damaged block.

    I downloaded the update to bios on the toshiba site, but it does not work.
    I have an external floppydisc. When I put the .exe to upgrade the bios on a floppy disk and turn on the laptop with the ~ button, I get the message "ready for the update of the bios, place the update disk and press any key when ready."
    I can hear the disk is searched, but nothing happened.

    How do I update the bios or is there something else wrong?
    Any help would be appreciated!

    In my opinion with the BIOS update you can't do anything wrong.
    If you BIOS, update by following the procedure described in the document FAQ Toshiba and the BIOS update can not be done properly, I'm afraid there is a problem with the BIOS chip and it may be defective.

    I can't say for sure, but if the BIOS chip is damaged, then you have a big problem.

  • Satellite Pro 6000 - how can I update the BIOS?

    Hi all

    I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

    I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

    My questions:
    * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
    * Is it possible to update the BIOS with the same version of Windows?

    Or perhaps there is another solution for this problem? Has no need to update my BIOS?

    Thank you.

    Hans

    Hello

    I agree with Luke.
    The rom Bios module seems to be damage.
    Either it must be replaced or flashed again.

    But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

    You last chance is an ASP that could check the BIOS ROM.
    As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

  • Satellite Pro 6000 and Windows Vista

    I bought a Satellite Pro 6000 and I want to put Windows Vista on it. I did an Upgrade Advisor and I was told that this graphics card will not work. Is this true?

    Thanks, Nick

    I'm afraid that's true. Satellite Pro 6000 is old enough for laptop and it will not supported in Vista. Install Windows XP Home edition and enjoy your life.

  • What are Satellite Pro 6000-compatible DVD - RW drives

    Hello

    Can someone tell me which dvd rw is compatible with the satellite pro 6000?

    Hello

    It is always difficult to find information on compatible drives due to different master / slave and c - salt settings.
    In my knowledge don Toshiba user manuals t provide such information. OK, I put t know if all don t user manual provide this, but I've found this info in my user manual.

    However. I studied a little someone suggested that the Toshiba SD-R6372 dvd recorder is compatible with Satellite Pro 6000/6100 units.
    I found this on a very popular online auctioneers ;)

  • How to remove the old fan and heatsink of the Satellite Pro 6000

    Hey people,

    Is there anyone who can help me with instructions step by step to remove the fan and the heatsink, I have a Toshiba Satellite Pro 6000...

    Concerning

    Barnie

    Try this guide shown here:
    http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

    The 6100 is almost the same as the 6000. This guide should be a big help. (Click on each image for a more detailed view).

    Kind regards

    chain

  • How can I get a hard copy of a manual for Satellite Pro 6000?

    Hello Forum users

    My brother and I bought my father (at age 81) a Satellite Pro 6000 model PS600E-20EE1-EN on E - Bay for Christmas. There is unfortunately no manual with the laptop. I'm in Australia and my father's in the United Kingdom and he asked me to help to get your hands on a paper manual.

    As I don't know anything about Toshiba laptops or point of sale UK, I was wondering if someone could help. I tried for an hour on the net but could not find a manual to download, which seems to correspond to the above specifications. I guess I could make a phone call international to support the customer in the United Kingdom, but thought I'd try here everything first. My dad would really like a paper, in order to download manual is second best option.

    All the tracks were greatly appreciated.

    Thank you.

    Stella

    Here on this site Web from Toshiba, you can download the manuals for all Toshiba laptops.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=EU

    The manual of your Satellite Pro 6000, you can find in the.
    Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000

    Best regards

  • Satellite Pro 6000: Base system device driver for XP

    Hello

    I want to install the:
    M - systems diskonchip 2000

    and the:

    Base system device

    On my Satellite Pro 6000 (XP).

    Does anyone know what I need to install drivers?

    Hello JR

    Did you install chipset driver?

    On this page of European driver for Toshiba-> * Archives *!

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • View fragile on Satellite Pro 6000

    Hi, I recently had to format my laptop: Toshiba Satellite Pro 6000 and model the screen is fragile.

    Please how can I get the right driver, I checked the net but without success.
    Thank you

    All the drivers, you can find on Toshiba download page http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.
    All that s!

  • The maximum size of HDD for Satellite Pro 6000?

    Hi, I am trying to install a 60 GB hard drive, but it is shaped, and it stops at the instalation of Windows XP Pro.

    Is there a size limit of HD?

    Thank you
    Ronaldo

    Hello

    It stops without any error message? If this isn't the case, then try another copy of Windows XP since the Satellite Pro 6000 shouldn´t have problems with this drive. I had 2 years a similar machine and I also got a 60 GB Toshiba HARD drive installed. It worked like a charm, so I can't imagine that the hard drive could be the problem.

    See you soon

Maybe you are looking for