RCK + RCKD in a context (ECC) extended call variable

Hi all

Any know if it is possible to get the key to call router (RCK) and router called key day (RCKD) in two separate variables ECC? How can it be done in the ICM scripting?

Thank you & best regards

Nick

Here you go, good luck.

David

Tags: Cisco Support

Similar Questions

Need to delete local references in the context of unknown call
Hello

I was looking for the need to remove local references and came across this documentation,
That means the calling context unknown? and how it causes no local references to remain allocated in the reference table that returns the native function?

http://Java.Sun.com/docs/books/JNI/HTML/refs.html

5.2.1 releasing local references

You want to write a utility function that is called from unfamiliar contexts. MyNewString in Section 4.3 example illustrates the use of Delete-LocalRef to remove local references promptly in a utility function. Otherwise, there will be two local references that remains allocated after each call to the function MyNewString.
How does it cause local references to remain allocated in the reference table that returns the native function?

Because it does not refer to the JVM when it gets released, he returned to the context of unknown number, i.e. an another piece of native code in your JNI layer. If the references remain until the unknown caller's context returns to the JVM.

functions called by events in the context of the caller?

Hello
Imagine I have class that is listening for an event on the class B. This listener will call method X in the class a. within method X, 'this' refers to the Instance of class B, I'm not in the context of the class a. isn't it a little tricky, or I hurt myself? Is there a way to make the listener call my method in the context of A?
Thank you very much for your attention, hope someone can clear up my mind about this
Paulo

You can use the delegate class to maintain the scope. Use google to check the use of Delegate.create

Extended registry variable

all,

I never really used the extended registry values. Normally I encode my alarms. But I decied I should give it a try.

As you can see I have this scope for a name of the agent with a value. But the alarm if the shot in any case always using stock rather than my extended version value.

No idea what I could do wrong?

Instead of using the Agent, you must use the DBSS_Cluster as your scope instance (the object root in the SQLServer data model)

You can do this by using the registry editor or you can use the Agent for management database do (which can be a little easier to choose the right instance from)

I personally prefer the OOTB Reg Editor

Stefan

Context of OSB incoming variable in Java legend

Hello
I have a legend of Java in the request pipeline where I need to access certain cookies. I receive these cookies in OSB after SSO authentication. So my query is, can I access the content of variables $inbound from Java code directly? or do I have to extract the cookies in the flow of the BSO before the legend of Java and pass it to the java program? Help, please!
ADI

You must extract a variable content in flow of OSB and pass it as a parameter to code Java using the legend of Java.

Code jar Java abstract scope OSB, had no information on the execution context of the pipeline of the OSB. He knows only that proxy OSB passes him.

Unable to appoint BPEL call variable activity with other variables output

Hi all

I tried to assign the result to an invoke activity to an output response BPEL activity variable. However I get Exception is thrown because the spec to the line is evaluated to be empty even if the output variable is clearly demonstrated in the trace stream. I am able to assign the output set variable to the variable response but when I try to assign the child element of the element of activity called the child element of the response output variable that it will fail.

The activity to invoke calls an external reference link http that calls a proxy OSB service and returns details in XML format. I just a few tests now so I'll be back just static values to see if I could recover and use them as variables in BPEL, regardless of the input in activity variable.

The HTTP Binding call will return:

< IAMDetails >

< ApplicationID > < / ApplicationID >

< user name > < / UserID >

< user name > < / username >

< / IAMDetails >

The XSD used for entry and exit for the HTTP binding are as follows:

Scheme of entry:

" < xs: Schema attributeFormDefault ="unqualified"elementFormDefault ="qualified"xmlns: XS =" http://www.w3.org/2001/XMLSchema "targetNamespace =" " http://www.w3schools.COM1 ">

< xs: element name = "IAMDetailsReq" >

< xs: complexType >

< xs: SEQUENCE >

< xs: ELEMENT type = "xs: String" name = "ApplicationID" / >

< xs: ELEMENT type = "xs: String" name = "User name" / >

< / xs: SEQUENCE >

< / xs: complexType >

< / xs: element >

< / xs: Schema >

Output schema:

" < xs: Schema attributeFormDefault ="unqualified"elementFormDefault ="qualified"xmlns: XS =" http://www.w3.org/2001/XMLSchema "targetNamespace =" " http://www.w3schools.COM12 ">

< xs: element name = "IAMDetails" >

< xs: complexType >

< xs: SEQUENCE >

< xs: ELEMENT type = "xs: String" name = "ApplicationID" / >

< xs: ELEMENT type = "xs: String" name = "User name" / >

< / xs: SEQUENCE >

< / xs: complexType >

< / xs: element >

< / xs: Schema >

The WSDL for the http binding

<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions
     name="qweerty"
     targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/http/GenLetterSendEmail/Project2/qweerty"
     xmlns:msg_in="http://www.w3schools.com1"
     xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/http/GenLetterSendEmail/Project2/qweerty"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
     xmlns:msg_out="http://www.w3schools.com12"
     xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    >
    <plt:partnerLinkType name="get_plt">
        <plt:role name="get_role">
            <plt:portType name="tns:get_ptt"/>
        </plt:role>
    </plt:partnerLinkType>
    <wsdl:types>
        <schema xmlns="http://www.w3.org/2001/XMLSchema">
            <import namespace="http://www.w3schools.com1" schemaLocation="xsd/IAMDetails.xsd"/>
        </schema>
        <schema xmlns="http://www.w3.org/2001/XMLSchema">
            <import namespace="http://www.w3schools.com12" schemaLocation="xsd/IAMDetails2.xsd"/>
        </schema>
    </wsdl:types>
    <wsdl:message name="IAMDetailsReq_msg_in">
        <wsdl:part name="IAMDetailsReq" element="msg_in:IAMDetailsReq"/>
    </wsdl:message>
    <wsdl:message name="IAMDetails_msg_out">
        <wsdl:part name="IAMDetails" element="msg_out:IAMDetails"/>
    </wsdl:message>
    <wsdl:portType name="get_ptt">
        <wsdl:operation name="get">
            <wsdl:input message="tns:IAMDetailsReq_msg_in"/>
            <wsdl:output message="tns:IAMDetails_msg_out"/>
        </wsdl:operation>
    </wsdl:portType>
</wsdl:definitions>

Here is the BPEL process

<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="BPELProcess1"
               targetNamespace="http://xmlns.oracle.com/GenLetterSendEmail/Project2/BPELProcess1"
               xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
               xmlns:client="http://xmlns.oracle.com/GenLetterSendEmail/Project2/BPELProcess1"
               xmlns:ora="http://schemas.oracle.com/xpath/extension"
               xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
         xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/http/GenLetterSendEmail/Project2/asdasd"
         xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/http/GenLetterSendEmail/Project2/qweerty"
         xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
         xmlns:ns4="http://www.w3schools.com123"
         xmlns:ns3="http://www.w3schools.com12">


  <!--
    ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
     ORCHESTRATION LOGIC                                              
     Set of activities coordinating the flow of messages across the   
     services integrated within this business process                 
    ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
  -->
  <partnerLinks>
    <partnerLink name="asdasd" partnerLinkType="ns1:Request_Response_plt"
                 myRole="Request-Response_role"/>
    <partnerLink name="qweerty" partnerLinkType="ns2:get_plt"
                 partnerRole="get_role"/>
  </partnerLinks>
  <variables>
    <variable name="Receive1_Request-Response_InputVariable"
              messageType="ns1:testing_msg_in"/>
    <variable name="Reply1_Request-Response_OutputVariable"
              messageType="ns1:testing2_msg_out"/>
    <variable name="Invoke1_get_InputVariable"
              messageType="ns2:IAMDetailsReq_msg_in"/>
    <variable name="Invoke1_get_OutputVariable"
              messageType="ns2:IAMDetails_msg_out"/>
  </variables>
  <sequence name="main">
    <receive name="Receive1" createInstance="yes" partnerLink="asdasd"
             portType="ns1:Request_Response_ptt" operation="Request-Response"
             variable="Receive1_Request-Response_InputVariable"/>
    <invoke name="Invoke1" partnerLink="qweerty"
            portType="ns2:get_ptt" operation="get"
            inputVariable="Invoke1_get_InputVariable"
            outputVariable="Invoke1_get_OutputVariable"
            bpelx:invokeAsDetail="no"/>
    <assign name="Assign1">
      <copy>
        <from>$Invoke1_get_OutputVariable.IAMDetails/ns3:ApplicationID</from>
        <to>$Reply1_Request-Response_OutputVariable.testing2/ns4:response</to>
      </copy>
    </assign>
    <reply name="Reply1" variable="Reply1_Request-Response_OutputVariable"
           partnerLink="asdasd" portType="ns1:Request_Response_ptt"
           operation="Request-Response"/>
  </sequence>
</process>

The error response

<error>faultName: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
</error>

So for now, I am trying to assign ApplicationID to the response variable but it still isn't the assign activity. I'm not sure what the problem might be that my knowledge on BPEL is quite limited. Any help would be greatly appreciated. Thank you.

Kind regards

Mark

You can try removing the attributeFormDefault and elementFormDefaults of the target schema elements...

OBIEE 11 g: how to call variables in places non-colonne
Hello world

I'm used to the table following (http://www.mycabi.net/wp-content/uploads/2010/02/VariablesChart1.jpg) know where and how to use variables in session/repository/presentation of OBIEE 10 g. But I tried to use it in version 11.X.6 of OBIEE and nothing seems to work.

Specifically, I am using standard variables in the subject text of dashboard, or static text narrative report or report object.

Can someone point me to a similar document for 11g?

Thank you!

-= Joe
I tried to text object & its syntax is: @{biServer.variables ["VariableName"]}

Popup context menu arrows are oversized...

After having upgraded to 8.1 windows context menu "'(extended menu) flyout arrows are now huge...
I thought it could have been my DPI which is 108 (so I corrected the remarks: config setting), or it could be something in
My chrome.css file...
It is not of the foregoing, it seems to me.
Looking at a new installation of all night also makes these oversized arrows.
Any thoughts?
BTW, I do not wish if away from my DPI custom setting in Windows... everything was fine in 8.0?

We had at least one previous thread: size of triangles bookmarks menu has changed.

There is a bug on file and a patch is in preparation for Firefox 29. You can follow here: https://support.mozilla.org/questions/975184#answer-496494

Firefox allows you to custom style rules change or hide the triangles. An approach has been posted here: https://support.mozilla.org/questions/975184#answer-509823

(I think it's specific to Windows 8.1, so most of the volunteers probably won't be able to get your hands on establish more specific).

context of the sequence

Hi all

Is there a difference in execution time to pass a value using in Labview (v/s) son calling the sequence context and then call the property set?

kindly let me know.

Hello Padugur,

Search in this thread:

Context and sequence settings

Wire are normally and parameters are faster then by setting a value via a property node.

How to detect if a call has been answered from a script

I need detect script RONA form when a call has been answered by an agent and try this to transfer to another agent that no answer the call, then the call was rerouted to the script of RONA.

It's: EAC 7.5 + IP IVR

can someone help me

Thanks in advance

Hello

they transfer to another Department and you manage RONA by target requery or they transfer directly on the extension and redirect you to a RONA script?

you need this information in real time (in the script running, are not related), right? There is a certain way, you can try. Agents call this range of services outside transfer? You can do a query of database for this call in the RONA script and check if ANI is a connected agent. If they do not call the service normally line you might conclude that there must be a transfer. But there would be a cleaner way...

... Since there is no standard information of this type available in real-time, you will need to use variables of the call. But normally the second call (transfer) is a new call to the system if you do not have your previous call variables (unles the system is set up to keep this information, or set you it to the new call for transfer).

Because you can set things in a CIM script when the call is to the agent, this information can come from your Agent's office. This means 2 things:

-Transfer must be made through the Office of the Agent of this scenario

-Put a PeripheralVariable at the initiation of the new calls but you would need to make a custom button to do this, I guess.

.. .These are things you might try. Personally, I use both methods, a first for this calsl a higher priority in the queue and secondary method to identify transfers (made by an agent custom frontend and variable ECC tho).

~ Fabian

Looking for a SQL query to retrieve callvariables + ECC to a RESULTS of SCRIPT EXECUTE (translation VRUS)

Hi team,

I'm looking for a SQL query check data (ECC + CallVariable) due to a RESULT of SCRIPT EXECUTE when you ask an external VRU with a translation route to VRU with a 'run external Script '.

In my view, that the data are analyzed between the termination call detail + termination call Variable.

If you have already such a SQL query I would be very grateful to have.

Thanks and greetings

Nick

Omar,

respectfully, shorten the interval of a day might not be an option for a history report ;-)

I recommend to take a look at the following SQL query:

DECLARE @dateFrom DATETIME, @dateTo DATETIME

SET @dateFrom = ' 2014-01-24 00:00:00 '

SET @dateTo = ' 2014-01-25 00:00:00 '

SELECT

TCV. DateTime,

TCD. RecoveryKey,

TCD. RouterCallKeyDay,

TCD. RouterCallKey,

VME. EnterpriseName AS [ECVEnterpriseName],

TCV. ArrayIndex,

TCV. ECCValue

OF Termination_Call_Variable tcv

JOIN THE

(SELECT RouterCallKeyDay, RouterCallKey, RecoveryKey IN Termination_Call_Detail WHERE DateTime > @dateFrom AND DateTime)< @dateto)="">

THE tcv. TCDRecoveryKey = tcd. RecoveryKey

LEFT OUTER JOIN Expanded_Call_Variable VME ON tcv. ExpandedCallVariableID = VME. ExpandedCallVariableID

WHERE the tcv. DateTime > @dateFrom AND tcv. DateTime<>

With variables, you can set up your code (for example, you could write SET @dateFrom =? and let the calling application to fill in the DateTime for you).

In addition, join two large tables with all the lines, as you did (TCD - TCV) is never a good option.

Another aspect to consider: all the ECC is actually arrays (always), is not good to leave aside the index value (tcv. ArrayIndex).

G.

Context path error
Hi all

I've been struggling with this error for a few days, can you please help me to understand the reason for the error?

# < 29 April 2013 12:37:40 CEST > < WARNING > < netuix > < HHQOP780JCJ0QN1 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < weblogic > <><>< 1367253460387 > < BEA-423420 > < Redirect is executed to start or refresh action. Redirect URL is /console/console.portal?_nfpb=true & _pageLabel = AppDeploymentsControlPage. >
# < 29 April 2013 12:38:03 CEST > < error > < hats > < HHQOP780JCJ0QN1 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1367253483959 > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1367253483780 'for task 7'. Error is: "weblogic.application.ModuleException: Context path ' / NTools1' is already used by the module: application NTools1.war: NTools1'"
weblogic.application.ModuleException: Context path ' / NTools1' is already used by the module: NTools1.war app: NTools1
at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1214)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:974)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:384)
at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:435)
to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:375)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
at weblogic.application.internal.flow.ScopedModuleDriver.activate(ScopedModuleDriver.java:194)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.next(DeploymentCallbackFlow.java:541)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:175)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:167)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:44)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
# < 29 April 2013 12:38:03 CEST > < error > < hats > < HHQOP780JCJ0QN1 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1367253483982 > < BEA-149202 > < encountered an exception while trying to commit the 1 task for the application "NTools1". >
# < 29 April 2013 12:38:03 CEST > < WARNING > < hats > < HHQOP780JCJ0QN1 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1367253483983 > < BEA-149004 > < failures have been detected all introducing deploy the task of application "NTools1" >.
# < 29 April 2013 12:38:03 CEST > < WARNING > < hats > < HHQOP780JCJ0QN1 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1367253483983 > < BEA-149078 > < message 149004 track battery
weblogic.application.ModuleException: Context path ' / NTools1' is already used by the module: NTools1.war app: NTools1
at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1214)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:974)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:384)
at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:435)
to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:375)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
at weblogic.application.internal.flow.ScopedModuleDriver.activate(ScopedModuleDriver.java:194)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.next(DeploymentCallbackFlow.java:541)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:175)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:167)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:44)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
# < 29 April 2013 12:38:04 CEST > < error > < Console > < HHQOP780JCJ0QN1 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < weblogic > <><>< 1367253484496 > < BEA-240003 > < Console met the following error weblogic.application.ModuleException: Context path ' / NTools1' is already used by the module: NTools1.war application : NTools1
at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1214)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:974)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:384)
at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:435)
to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:375)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
at weblogic.application.internal.flow.ScopedModuleDriver.activate(ScopedModuleDriver.java:194)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.next(DeploymentCallbackFlow.java:541)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:175)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:167)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:44)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>

I have no other application with the name NTools1 and it's JMS problem?

Could someone explain please the error message.

Thank you
Niharika
It isn't associated jms, see deployments through the administrative console. Find all the applications with the status of 'failure '. You can see the root of context by extending the application, then the war file. There are probably more than a request to /NTools1

How to call via flashvars variables in this code

Newbee to AS and flash, but I'm learning. Try to incorporate this piece of code with the ability to call variables via flashvars, but everything I try does not work. Try to get the PLMN the server address and the names of users call via a PHP echo statement in the part of flashvar param. As my primary codeing is PHP, I don't have a problem here, it's getting the variables in the swf object. It's this (truncated) I have so far:
package
{
import flash.display.Sprite;
import flash.net.NetConnection;
to import flash.net.NetStream;
import flash.events.MouseEvent;
import flash.events.NetStatusEvent;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
Import fl.controls.Button;
Import fl.controls.TextInput;
import flash.display.Graphics;
import flash.display.Shape;
SerializableAttribute public class UniversalChat extends Sprite
{
My added code starts here
var paramObjsn:Object is LoaderInfo (this.root.loaderInfo).parameters.serverName;.
var rtmpNow:String = paramObjsn.toString ();
put an end to my code added
private var nc:NetConnection;
private var nsIn:NetStream;
private var nsOut:NetStream;
private var vidLocal:Video;
private var vidRemote:Video;
private var startStreamOut:Button;
private var startStreamIn:Button;
private var streamIn: TextInput;
private var streamOut:TextInput;
private var: camera;
private var mic:Microphone;
private var connectShape:Shape;
public void UniversalChat()
{
NC = new NetConnection;
NC. Connect (rtmpNow);
nc.addEventListener (NetStatusEvent.NET_STATUS, checkConnect);
vidLocal = new Video (120,90);
vidRemote = new Video (320,240);
... code continues
Thanks in advance!

Then, you must import the LoaderInfo class:

import flash.display.LoaderInfo;

Which is the best way for a function called identify the class name of the appellant.

Which is the best way for a function called identify the class name of the appellant.

(1) sun.reflect.Reflection using the function call

                Class caller = Reflection.getCallerClass(2);
                System.out.println("Caller Class Name ::"+caller.getName());

Trace of function called battery 2) analysis of current threads

                StackTraceElement[] stElements=Thread.currentThread().getStackTrace();
                System.out.println("Caller Class Name ::"+stElements[3].getClassName());

Y at - it all the other ways to achieve the same. What is the best way?
Called function does accept no argument, I don't want the arguments of function calling function called t.

Help, please.

With greetings
Paul

798185 wrote:
Which is the best way for a function called identify the class name of the appellant.

Y at - it all the other ways to achieve the same.

SecurityManager

    // 0 is the anonymous SecurityManager class
    // 1 is this class (also works in static context)
    // 2 is calling class
    static Class getClass(int i) {
        return new SecurityManager() {
            protected Class[] getClassContext() {
                return super.getClassContext();
            }
        }.getClassContext();}

CopyFileEx calling with the COPY_FILE_NOBUFFERING flag is no longer works; the computer CRASHES

Earlier this month, MS published KB3121255. One of the two issues he said to resolve: when you call the CopyFileEx function with the COPY_FILE_NO_BUFFERING option to copy files to a read-only Windows Server 2012 volume, Volume Shadow Copy Service (VSS) backup of the IP data server fails with an "ERROR_INVALID_PARAMETER" error message

I started running in CopyFileEx + COPY_FILE_NO_BUFFERING problems in the last days. It is part of a supercharged version of the Replace.exe I've been using and improve for years. Because I wanted to see where each file has been COPIED with success, I always turn off the COPY_FILE_NO_BUFFERING. I tried to use my code to replace it today, and as soon as he informed me that he copied, it blocks HARD. So I loaded into the debugger and instrumented to it like crazy, particularly emphasizing the CopyFileEx calls. These calls are pass on only one computer, although I also use replace software update on other Win 7 (32 & 64-bit) machines on my home network.

Of course, CopyFileEx is where it hangs. Allow me to set hanging for you (Replace is a console application):
1. Call CopyFileEx with the COPY_FILE_NO_BUFFERING option (btw, my code tests the version of the OS to make sure that the option is supported before you use it).
2. The deaths of the sytem STOPS; If I try to open an another command prompt, which weighs too much.
3. Use Ctrl-Alt-pause to break into the debugger (running under VS 2012). She broke out and note that the system is in an impasse. Therefore an impasse that you are unable to force even a shutdown. VS works very well, and I see the stack of calls, variable in the sources of files, etc.. While I can close several applications, including VS, the app to replace launched by VS's not going anywhere. You must press the PC power button to do a forced stop, then walk back again.
I installed KB3121255 hoping it would cure the problem, but he did not. In an attempt to learn more about when and where it crashes, I then coded a CopyProgressRoutine() reminder for I can see a little more on what Windows was done before she suffocated and hooked hard. For those who are familiar with CopyProgressRoutines, I was able to see a single entry, advising me of the first stream. Not ready to copy data, all notifier recall a stream was found. As soon as I return from CopyProgressRoutine() to the BONE, it's on. An impasse & hung.

When I no longer use the COPY_FILE_NO_BUFFERING option, all this goes away. I'm tired and I have no more time for testing (almost 05:00 and I've been chasing this for the last hours 7 - when you have to restart several times it really drags things).

HEY MICROSOFT: I hope that someone is going to look on this. KB3121255 has NOT this problem in Windows 7!

Thank you...

-dennis

I'm running Windows 7 x 64 SP1. I have install all security updates as they come out and other optional as well (such as KB3121255). Here are a series of SYSTEMINFO, in case it's useful:

Host name: DENNIS
Name of the operating system: Microsoft Windows 7 Professional
OS version: 6.1.7601 Service Pack 1 Build 7601
OS manufacturer: Microsoft Corporation
OS configuration: Standalone Workstation
OS Build type: multiprocessor Free
Registered owner: dennis
Registered organization:
Product ID: 00371-177-6350957-85666
Original installation date: 27/04/2011, 20:52:36
Starting system: 12/04/2016, 03:51:11
Manufacturer: Lenovo
System model: IdeaCentre K330
Type of system: PC x 64
Processor (s): 1 processor installed.
[01]: Intel64 family 6 model 42 Stepping 7 GenuineIntel ~ 2584 Mhz
BIOS version: LENOVO DKKT18AUS, 15/02/2011
Windows directory: C:\windows
System directory: C:\windows\system32
Starting device: \Device\HarddiskVolume1
Local system: en - us; English (United States)
Input locale: en - us; English (United States)
Time zone: (UTC-08:00) Pacific (U.S. & Canada)
Total physical memory: 12 271 MB
Available physical memory: 8 899 MB
Virtual memory: Max size: 24 539 MB
Virtual memory: available: 20 715 MB
Virtual memory: in use: 3 824 MB
Office (s) swap file: C:\pagefile.sys
Area: HOME
Logon server: \\DENNIS
Corrections: 413 fixes installed.
[01]: KB2849697
[02]: KB2849696
[03]: KB2841134
[04]: KB2670838
[05]: KB2830477
[06]: KB2592687
[07]: KB971033
[08]: KB958559
[09]: KB2305420
[10]: KB2393802
[11]: KB2479943
[12]: KB2491683
[13]: KB2492386
[14]: KB2506014
[15]: KB2506212
[16]: KB2506928
[17]: KB2509553
[18]: KB2511455
[19]: KB2515325
[20]: KB2533552
[21]: KB2534366
[22]: KB2536275
[23]: KB2536276
[24]: KB2541014
[25]: KB2544893
[26]: KB2545698
[27]: KB2547666
[28]: KB2552343
[29]: KB2556532
[30]: KB2560656
[31]: KB2563227
[32]: KB2564958
[33]: KB2570947
[34]: KB2574819
[35]: KB2579686
[36]: KB2584146
[37]: KB2585542
[38]: KB2603229
[39]: KB2604115
[40]: KB2619339
[41]: KB2620704
[42]: KB2621440
[43]: KB2631813
[44]: KB2639308
[45]: KB2640148
[46]: KB2644615
[47]: KB2645640
[48]: KB2647753
[49]: KB2653956
[50]: KB2654428
[51]: KB2660075
[52]: KB2661254
[53]: KB2664825
[54]: KB2667402
[55]: KB2676562
[56]: KB2679255
[57]: KB2685811
[58]: KB2685813
[59]: KB2685939
[60]: KB2690533
[61]: KB2698365
[62]: KB2699779
[63]: KB2705219
[64]: KB2709630
[65]: KB2709715
[66]: KB2709981
[67]: KB2712808
[68]: KB2718704
[69]: KB2719857
[70]: KB2724197
[71]: KB2726535
[72]: KB2727528
[73]: KB2729094
[74]: KB2729452
[75]: KB2732059
[76]: KB2732487
[77]: KB2732500
[78]: KB2735855
[79]: KB2736422
[80]: KB2742599
[81]: KB2743555
[82]: KB2750841
[83]: KB2756921
[84]: KB2757638
[85]: KB2761217
[86]: KB2763523
[87]: KB2770660
[88]: KB2773072
[89]: KB2785220
[90]: KB2786081
[91]: KB2789645
[92]: KB2790655
[93]: KB2791765
[94]: KB2798162
[95]: KB2799494
[96]: KB2799926
[97]: KB2800095
[98]: KB2803821
[99]: KB2807986
[100]: KB2808679
[101]: KB2813170
[102]: KB2813347
[103]: KB2813430
[104]: KB2813956
[105]: KB2820197
[106]: KB2820331
[107]: KB2832414
[108]: KB2833946
[109]: KB2834140
[110]: KB2834886
[111]: KB2835361
[112]: KB2835364
[113]: KB2836502
[114]: KB2836943
[115]: KB2839894
[116]: KB2840149
[117]: KB2840631
[118]: KB2844286
[119]: KB2845187
[120]: KB2845690
[121]: KB2847311
[122]: KB2847927
[123]: KB2849470
[124]: KB2852386
[125]: KB2857650
[126]: KB2861191
[127]: KB2861698
[128]: KB2861855
[129]: KB2862152
[130]: KB2862330
[131]: KB2862335
[132]: KB2862966
[133]: KB2862973
[134]: KB2863058
[135]: KB2863240
[136]: KB2864058
[137]: KB2864202
[138]: KB2868038
[139]: KB2868116
[140]: KB2868623
[141]: KB2868626
[142]: KB2868725
[143]: KB2871997
[144]: KB2872339
[145]: KB2875783
[146]: KB2876284
[147]: KB2876331
[148]: KB2882822
[149]: KB2883150
[150]: KB2884256
[151]: KB2887069
[152]: KB2888049
[153]: KB2891804
[154]: KB2892074
[155]: KB2893294
[156]: KB2893519
[157]: KB2893984
[158]: KB2894844
[159]: KB2898857
[160]: KB2900986
[161]: KB2901112
[162]: KB2904266
[163]: KB2911501
[164]: KB2912390
[165]: KB2913152
[166]: KB2913431
[167]: KB2913602
[168]: KB2913751
[169]: KB2916036
[170]: KB2918614
[171]: KB2919469
[172]: KB2922229
[173]: KB2923545
[174]: KB2926765
[175]: KB2928562
[176]: KB2929437
[177]: KB2929733
[178]: KB2929755
[179]: KB2929961
[180]: KB2930275
[181]: KB2931356
[182]: KB2937610
[183]: KB2939576
[184]: KB2943357
[185]: KB2949927
[186]: KB2957189
[187]: KB2957503
[188]: KB2957509
[189]: KB2957689
[190]: KB2961072
[191]: KB2962872
[192]: KB2965788
[193]: KB2968294
[194]: KB2970228
[195]: KB2971850
[196]: KB2972100
[197]: KB2972211
[198]: KB2972280
[199]: KB2973112
[200]: KB2973201
[201]: KB2973337
[202]: KB2973351
[203]: KB2976627
[204]: KB2976897
[205]: KB2977292
[206]: KB2977629
[207]: KB2977728
[208]: KB2978092
[209]: KB2978120
[210]: KB2978668
[211]: KB2978742
[212]: KB2979570
[213]: KB2980245
[214]: KB2981580
[215]: KB2982378
[216]: KB2984972
[217]: KB2984976
[218]: KB2984981
[219]: KB2987107
[220]: KB2990214
[221]: KB2991963
[222]: KB2992611
[223]: KB2993651
[224]: KB2993958
[225]: KB2994023
[226]: KB2998527
[227]: KB2999226
[228]: KB3000061
[229]: KB3000869
[230]: KB3000988
[231]: KB3001554
[232]: KB3002885
[233]: KB3003057
[234]: KB3003743
[235]: KB3004361
[236]: KB3004375
[237]: KB3005607
[238]: KB3006121
[239]: KB3006137
[240]: KB3006226
[241]: KB3008627
[242]: KB3008923
[243]: KB3009736
[244]: KB3010788
[245]: KB3011780
[246]:
Network adapters: 1 card installed.
[01]: Intel 82579V Gigabit Network Connection
Connection name: local connection
DHCP enabled: Yes
DHCP server: 192.168.1.1
IP addresses
[01]: 192.168.1.221
[02]: fe80::a962:4d4c:1f37:afef
[03]: 2601:602:8f01:1900:5105:b4fb:7ace:c8cd
[04]: 2601:602:8f01:1900:a962:4d4c:1f37:afef

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

*

http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

http://social.msdn.Microsoft.com/Forum

If you give us a link to the new thread we can point to some resources it

RCK + RCKD in a context (ECC) extended call variable

Similar Questions

Maybe you are looking for