CopyFileEx calling with the COPY_FILE_NOBUFFERING flag is no longer works; the computer CRASHES

Similar Questions

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• hostsvc: called with the DISP invalid/missing entry

  If I try to follow links in one of the e-mails I get from Big Brother, I get the following message is displayed:

  hostsvc: called with the DISP invalid/missing entry

  This is the full URL.

  Please see: http://servername/bb/cgi-bin/hostsvc.exe?HOSTSVC=server1, companyname.svcs, & DISP

  I noticed that the text of the e-mail message contains an = sign, which is not part of the hyperlink. If I understand the = the link works then. For example:

  See example: http://servername/bb/cgi-bin/hostsvc.exe?HOSTSVC=server1, companyname.svcs, & DISP=

  I did the search. Here's what's happening with the Outlook 2007 SP2 calendering of BB notifications, so that the & DSP = part of the bond is converted to & DSP without the = in the link to the notification.

  This deformation occurs only when a SMS is received, which has a text version of a link HTML in there and it is received by Exchange 2007 with Outlo0k 2007.

  When outlook 2007 (sp2 in our case) will receive an email with a link inside HTML text, it makes a "best body format.

  Conversion. You always have an email in text format, but there is a HTML link truncated in the recipe, which has not only = inside.

  This only happens when the text is converted to HTML.

  I even tried hard put forced HTML or RTF format on the mailbox... no go... He did force these formats. but the text to html conversion happens broken Similarly, regardless of the size of the mailbox.

  If messages would be in HTMl, it would work perfectly. Maybe one day you could make this an option... the message in text or html format. (development

  request)

  If I paste the link in an html format email, it works very well. Also, if I find the message and click the link in the notification with Outlook Web Access, it works very well.

  Only from Outlook 2007, Microsoft changed the default HTML rendering, used by Word 2007 engine. That's the problem. It is this rendering engine that has the problem, a lot of people are very annoyed and Microsoft does not care to fix it.

  So far we have the option for sending to HTML, or Microsoft fixes some of this.

  the only option we have is to get the wrong message from: hostsvc: called with the DISP invalid/missing entry, then to go into the browser and add in the '=' manually, and it will then visit the link in the notification.

  Any ideas or suggestions? Thank you

  Hi Milt

  Well, in hostsvc.exe, he could accept a missing DISP (or deformed) and defaults to «» This should be the solution. I don't think that it could break anything if it were this way.

• can't activate windows xp with the product key that came with the computer

  I got a computer of 510N HP Pavilion from a friend who was absolutely riddled with viruses and malware of all kinds.  Every thing I did to clarify apparently nowhere got done or made it worse.  At the end of the day, the computer would only begin to restart, stop after the start of the HP logo screen, then start to boot, etc and more.  All I could do was to install the hard drive in another computer and format, from scratch.  Now, I'm trying to install the system to XP op for the disc that came with the computer.
  the problem: the code the product key on the case went wrong with the disc.  After searching for solutions, I found a code on the disk by searching the files it contains, tried and it worked!  Problem is when I try to turn it on, it says it's an "unauthorized product key."  I tried to enter that code on the box and who says he is "invalid".  The Cd look authentic; are for distribution with new pc HP and Compaq.  After a further inspection drives are XP Professional SP2, while if it is XP Home Edition.  What gives?  Activation does not anyway. It is any use that will not make me buy a new set of disks?

  Please let me know if more info or detail is necessary.

  PS - only a single piece of hardware has been changed - the cdrom initially provided with the computer was bad, so I went out to perform the installation.

  When you perform a restore to the factory on some HPs condition you have two choices: 1) a restoration which keeps your data and programs (in a repair installation); (2) a full destructive restore which brings back the machine to the State, it's when you first opened the box. In your case, you have already wiped the drive, so the question is moot. I would call the HP technical support. Normally when you use an OEM recovery media (HP, Dell, etc.) a product key is never required during the restore. If you have used the media to restore HP shipped with your system and are always asked for a key and one on the sticker machine is not accepted, then something is certainly. MS - MVP - Elephant Boy computers - don't panic!

• No option has worked at the start of vista & no CD provided with the computer!

  I tried all the options (boot recovery, System Restore, memory something or other, etc) and nothing won't boot up to vista. It puts me in a vicious cycle of hit ctrl alt + delete to restart again and again. I have tried absolutely every single option. I can get the bios of course but that's all. I don't see anything else. I have no Vista CD because I bought the computer from comp usa so I can't even try to start with a CD. I want to do a clean install, but I guess that's not possible with no CD :-(  I just need to crash the computer in the trash?  I am disabled so I have no money for a new CD of windows, they are simply too expensive.

  Thank you

  Tammie

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I let my child play with the computer, now when I click on a tab, it shows "(*)" to bottom of page, as the wheel of the mouse to zoom in and out and not scroll. I don't know how to fix it.

  I have let the child play with the computer. Now when I click on a tab it show (*) rather than to go to the tab, zoom on the wheel of the mouse rather that scroll and all links open a new window. How can I reset the settings to the default ones?
  Thank you.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Is it possible to connect and reconnect a keyboard with the computer on?

  I have now 2 iMacs Office sitting side by side on my desk.  Since I want a keyboard with a numeric keypad on the right side, I found the only way to get that with an Apple keyboard with a USB connected keyboard.  Therefore, when I want to knit back and forth between macs, I have to unplug the keyboard of one and then plug it in another one - and back.  It would be a hassle to turn off mac whenever I need to do that, so I was wondering if it would damage a computer.  Two usb ports are usb powered external hubs.

  There is no problem with the device on a keyboard with the computer and plug in another.  It's only external drives that need to be removed before unplugging.

  

• Question about re - install the software that came with the computer

  I inadvertently deleted the controller Ethernet and Bus High Definition Audio my laptop while trying to remove the Real Player I downloaded. How can I get these? What do I need to use the recovery disk that came with the computer or y at - it another way? If I use the recovery disk will I lose data and other software on the computer?

  Thank you.

  Hello

  If you are lucky man you will be able to use the tool to clean Windows system restore.
  This tool allow you to roll back the State of the OS to the point of beginning.
  I think you can use it and try to roll back the OS to the point where you have removed these applications.

• PHP: The partition on my solitaire game that come with the computer has a prefix of Php.How can I get rid of php?

  The partition on my solitaire game that come with the computer (but not on the same computer system of woman) has a prefix of Php.

  How can I get rid of the php?

  Hi pichick,

  1. what operating system is installed on your computer?

  2. when the question is is produced?

  3. you remember to make changes to your computer before the problem?

  4. are you referring to the solitaire game that is already installed in your operating system, the solitaire online game or the game of solitaire that is downloaded from the Internet?

  In the meantime, follow these methods.

  Method 1:

  Step 1:

  I suggest you Uninstall and reinstall the game and check (if referring to downloaded the game)

  Note: Specific measures for Windows 7 and Vista

  Step 2:

  If you are referring to the solitary of the Games Explorer, you can disable the feature, restart the computer and then turn on the game and check its features.
   
  a. click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. develop the Games folder, clear the check box next to solitaire to turn a Windows feature (game) off

  c. click OK.
   
  That repeat steps but next time make sure that the box next to solitaire.
   
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Note: Specific measures for Windows 7 and Vista

  Method 2:

  If the issue took place recently, you can perform a System Restore to the point that it was working fine.

  Note: Specific measures for Windows 7

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I did a clean reinstall with XP and now Microsoft tells me I don't have a real copy endorsed XP, but it's the same copy supplied with the computer.

  true copy endorsed XP,

  I have a laptop of 2005 which came with XP. I lent it to a parent and it came back up. I did a clean reinstall with XP and now Microsoft tells me I don't have a real copy endorsed XP, but it's the same copy supplied with the computer. Because if it can't get the bulk of the safety at work. That is what it is.

  Refer to this article to get tips on how to validate your copy of xp.

  http://support.Microsoft.com/kb/307890

• Error 1073807246 after connect the datalogger with the computer

  I have labview vi to get data from the data logger.

  First of all, it is excutable without error

  

  , but when the data logger is connected to the computer (COM1 serial port), my vi labview error 1073807246 shows.

  I know a little about this error, it means open a visa which was opened, but donot why error occurs when the datalogger connect with the computer.

  I just copy this previous labview vi of the lab computer, it worked well on this computer.

  Thanks much for any help.

  

  It's pretty clear you have some major, major misconceptions. The provider software is not required for a LabVIEW program and in fact is at the origin of the conflict. Windows allows more than a program unique access to com ports and as long as you remain convinced that you have continues to run this program, the LabVIEW program will never run. Certainly, the other pc is configured to use a port com for this program and for LabVIEW.

  If indeed the other program is needed, the program LabVIEW was written not as a comprehensive control program.

• My 3 year old has played with the computer and now my screen is sideways. How should I do?

  My 3 year old has played with the computer and now my screen is sideways.  How should I do? I tried my computer and went through everything on the screen and doesn't change anything.

  Here's how to do hold Ctrl + Alt and then press the arrow keys on your keyboard.

  or right click on desktop, select options graphics then Rotation.

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.