RDP in the remote computer works for only 1 of the 2 local machines almost identical
I have a laptop and desktop at home, and I'm eager to distance in my work machine. The laptop can RDP into my machine to work very well, but I was not able to understand why my office cannot. I was even able to RDP in my work from my office machine in the past (a few months ago), but now he can't. Here is the error message I get on the desktop after the RDP authentication will fail; the laptop can connect correctly by using the same credentials.
Both are running Windows 7 Ultimate 64 bits.
Both use supplied with windows Remote Desktop connection application.
Both access to the internet via a wireless connection (the desktop equipped with a wireless adapter computer) connected to the same router.
Both are fully updated with updates of Windows and run the same antivirus.
The two successfully connect to a VPN software that connects very well and uses the same network as my work computer credentials.
Both must connect using the same login information, which are the same login information that I use at work.
On the desktop, I tried and failed with the following text:
Disabling the Antivirus and Windows Firewall.
Copy and run the RDP file saved to the laptop on the desk.
Reinstalling the VPN software on the desktop.
The only difference between the two that I can think is that my office does not require a password to connect; but it doesn't stop me of remoting in the working computer in the past, and my computer configuration has changed very little since then.
What else can check to figure out what could be allowing the laptop through, but deny the Office? Any help is appreciated, because I prefer to use my home office instead (two monitors, better equipment, etc.).
I was able to find a workaround for this problem, well that is not ideal. It seems that my work computer and desktop home somehow at some point got the same network IP address (192.168.1.106, at least by trying to connect to my work machine). Even if not connected via VPN software, they both have the same network IP address. That's why I was able to connect to another computer on the network, but not my machine specific work; My Home Office thought he needed to connect to itself. So what I was for my home desktop to have a different network IP address. my laptop has had a (192.168.1.3) which differed from the work machine.
What I did to work around that it was:
On my desktop, I opened the command prompt and run the ipconfig command and writes down the subnet mask and the default gateway of my wireless connection for use in later steps.
I then roughly followed the steps of this (somewhat similar to Windows 7) site to modify the IPv4 settings to change from automatic to manual IP address assignment. Set it to manual and back (i.e. reset) has not worked for me and has given rise to the same network IP address. So, using the values of the ipconfig I ran earlier, I chose a random network IP (192.168.1.42) address, left the settings to manual assignment and find other info. For DNS servers, I use Google's Public DNS.
The end result looks like the following and I am able to connect to my work from my home office machine.
EDIT:
After a little more work and looking around, I could cancel the settings above (thus leaving my office with the default settings) and solve the problem of logging in my router settings and my office assign an IP network (192.168.1.42) using its MAC address. As long as I don't have to RDP into a computer to work with the IP address assigned, it will work very well.
I would mark this as the answer but do not see how.
Tags: Windows
Similar Questions
-
Why ask my computer to connect me to a remote computer (I have only one) when I try to defrag
I have a HP Pavilion Elite HP - 210y PC but I can't defragment it because it says to put my task scheduler, because it "does not work".
When I try to put the Task Scheduler it asks me to "connect to a remote computer"... I have a!
Try:
Button start, computer make a right click, properties, then the System Protection. then the Remote tab.
You can choose to allow it do not.
-
Why not uninstall it on my computer work for the cards galaxy toolbar?
I tried for about four hours to uninstall the toolbar from Galaxy of cards because my computer is mess with it and it does not work, uninstall on my computer ceases to appear with it please wait it is complete the uninstall, but there is no progress.
Hello
1. what operating system is installed on the computer?
2. is the specific cards Galaxy toolbar issue?
Run that fix the following:
Note: the following fit-it asks you what program needs to be uninstalled, go to the Galaxy of maps.
Solve problems with programs that cannot be installed or uninstalled:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
-
Microsoft makes my computer working for some reason stop?
It's my 3rd computer that has stopped working now 2nd one that was because of BSOD is Microsoft trying to troll me or something like that because I spent almost £900 repair my computer whenever it has stopped working. If Microsoft has a solution to my problems and it works I'm not also annoyed with them but at the moment I am on this one I have I cant launch even in Mode safe with this reboot after BSOD.
So far, we know absolutely nothing about your system, so if you give information, you might be able to get better help.
Unfortunately, the implementation of MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.
Not knowing the basic informations of a problem prolongs the frustration and the agony of these issues, but that's the way they choose to turn things around here.
Thank you owners MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.
Please answer the following questions, the better you can:
What is your system brand and model?
If you have a Dell computer, what is the Service tag?
What is your Windows Version and the Service Pack?
Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, avast! Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a working CD/DVD (internal or external) drive?
You have a real installation CD bootable Windows which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
If the system works, what do you think might have changed since the last time it did not work properly?
As you declare a BSOD, why can you tell us a few details what the BSOD said.
Here's a BSOD example showing information you provide:
Send for the nose and the Red arrows (3 to 4 lines total).
Send all * line STOP message since there are clues in the 4 parameters.
Ignore the boring text unless it seems important to you. We know what a BSOD looks like, we need to know what your BSOD looks like.
If there is a name of the file listed in the STOP message, don't forget to include that too.
-
In Win XP Prof, I see no computer working group (not even my own a local)!
What are the parameters could I have clogged? Set up the network domestic local (MSHOME, of course), NetBIOS over TCP/IP is enabled, all systems using XP Sp3, connected by the router. Quite OK, but not to other computers on the LAN (but can can their ping by IP address, but not a computer)
Hi rerx,
You can get see the sharing computer when it connects to the IP, something like \\192.169.1.101. If you can then on computers please proceed as follows.
Click Start
Go to term,
Type CMD
Press ENTER.
Type "ipconfig/flushdns" (without the quotes)
Press ENTER.
Type "ipconfig/registerdns".See if you can now test the computers by name.
If you are still unable to disable third-party firewalls which can be put in place on one of the computer and the router.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Using Windows 7 Pro on desktop computers, Windows Server 2008 on stocks. I have set up actions of the user (the same for everyone) on the server. The share of the 'always available offline' value, flash sync to logoff.
Synchronization of some user without problem. Some never synchronize. Synchronization log indicates a successful synchronization. I even tried reallocation of a PC, that was fine synchronization for a user to another user. No synchronization to the second user.
I tried everything I found on the forums, but nothing changes.
I can manually run SyncToy or FreeFileSync and operation of synchronization. I tried to run these via scheduled tasks and they fail.
Help please!
Hi Paul,.
Thanks for posting in the Microsoft community.
The question you have posted is complex in this community. I suggest you post in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
I hope this helps!
-
How to connect to the remote computer
Original title: how to goto the program installation and connection to the remote computer.
Only school in priperly IAM.
Hello
Thanks for posting the request in Microsoft Community Forum.
Please answer the question that helps us provide a better solution.
What exactly are you trying to do?
If you try to connect to the remote computer or if you allow someone to connect to your computer, visit the following links and check:
Connect to another computer using Remote Desktop connection
Allows a user to connect to your computer using Remote Desktop connection
Hope this information helps. Please feel free to respond if you have any other questions, we would be happy to help.
-
1 extraction process may work for the 2 diagrams?
Hello
My question is this:
I ext1 extraction process, but I want this process to work for the 2 diagrams like HR and scott.
I couldn't find the correct syntax for the 2 diagrams. He works for hr diagram but I could not add the correct settings for scott.
It works for only hr:
extract ext1
UserID ggate, password oracle
TRANLOGOPTIONS ASMUSER sys@ASM1 ASMPASSWORD 123456
exttrail/u01/app/oracle/product/gg/dirdat/tr
DDL are mapped objname hr.*;
table hr.*;
How would it be if I want to add schema scott?
Yes, something like that might work... Simply add additional TABLE lines... with more tables or diagrams.
extract ext1
UserID ggate, password oracle
TRANLOGOPTIONS ASMUSER sys@ASM1 ASMPASSWORD 123456
exttrail/u01/app/oracle/product/gg/dirdat/tr
DDL are mapped;
table hr.*;
table scott.*.
I also removed the OBJNAME of the DDL statement option. Since I assume you want to replicate DDL on the tables that you capture, DDL ARE MAPS will take care of it.
Whether the owner.table names are the same in the source and target in the replicate database, you can use
CARD *. *, TARGET *. * ;
In this way, he'll just take any operation in the log file and apply them to the corresponding table in the target database. So that when drawings or additional tables are added in the excerpt, you do not need to change your settings replicate files.
-
Error is the standard:
This computer cannot connect to the remote computer. Try to connect again. If the problem persists...
The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.
When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.
No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.
All computers on the domain work for RDP is only now a single computer.
Error is the standard:
This computer cannot connect to the remote computer. Try to connect again. If the problem persists...
The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.
When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.
No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.
All other computers on the work of field for RDP is only now a single computer.
This post on the forum of MSFT Services Office to remotely help...
http://social.technet.Microsoft.com/forums/en/winserverTS/threads
-
A company called vap technology called me last night on my phone at home and said to my computer was about to crash. they were Indian speaking people and said they were working for microsoft support; as I am not a laptop user profficent of long date, I couldn't tell if they were or not. How to get back money from $149, I paid them to fix the problems and how to uninstall the programs they put on my laptop; also what can I use to tell if it's a microsoft technology? Help!
It is a scam. See:
http://www.microsoft.com/security/online-privacy/avoid-phone-scams.aspx .
If they have access to your PC, they can install any number of malicious programs. My recommendation is to do a clean reinstall of Windows - it's the only way to be sure that your system is clean.
If you have them paid by credit card, tell your card provider immediately what has happenend.
All the data on your computer (passwords, credit card numbers, numbers of account documents, etc.) may have been compromised (they may not know now). According to the companies concerned (for example your bank) what happened.
Use another PC to change passwords.
Consider telling your local police.
-
How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002. I found the site for download fixit, but I have no desktop feature other than the startup repair options. I thot I could download fixit from my flash drive solution, but I can't find a command prompt to access. It is the only page from command prompt I can find... I'm in x:\windows\system32\cmd.exe trying to find the good order for my location flashdrive G:
I used to go G and get G but it says only that go and get are not internal or external commands and not an executable program or batch file
HELLLLLLLPPPPPPP! Thank you!
x:\ I do not think it is a 'valid' for what you intend. I used a 2nd computer and the original disk, I don't remember tho if I used windows file transfer or just copy, but I had the disc copied to the flash drive and reinstalled windows 7. I have still no working dvd rom (x 2) they open and close (sometimes), but the drivers need to be mounted to something incomplete. repair is absent as well. some other problems too but its been executed in this way for months (apx5). here and there, I get an email from answers, that's how I arived here really (enroute) hope this helps (a bit)
-
original title: right clicking on desktop freezes the computer, Windows explore and Dr. Watson times stop working. Only Ctrl, Alt, Del to reset computer
Make a right click on desktop freezes the computer. Explorer Windows and Dr. Watson stop working. Only Ctrl, Alt, Del restarts computer
Hi Ken1948,
1. did you of recent changes on the computer?
2. you receive the error message?
3 when was the last time it was working fine?
Check if the problem persists in safe mode.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
after update to XP media center units Vista remote control
Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista. I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it. Handset was working fine a few days ago. I also went in 'Administrator', 'services' and then active HID, but it still does not work. Media works well, but it would be nice to have the operation of the remote control! Not particularly computer, simply suggestions please! Thank you, Nick.Hi Nicolas,
I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.
For more information, you can check the link below,
-
Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.
Did you run the System File Checker?
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/#appliesToTry Safe Mode (you have this problem in Mode safe?).
315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCHIf you cannot reproduce the errors in Mode safe see if you can further isolate the cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/default.aspx/KB/929135Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. First try checking not be (read-only) to see if it reports any problems file or hard drive. If this is the case, start by checking the two boxes, in no other rerun.
Create another user and see if they have the same problem as your current user.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileDifficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx811151 - how to copy user data to a new user profile
http://support.Microsoft.com/?kbid=811151Description of Windows Easy Transfer for Windows Vista
http://support.Microsoft.com/kb/928635How to restore the security settings the default settings?
http://support.Microsoft.com/kb/313222/#appliesTo -
ATL + tab doesn't work is not within the remote computer
I connect remotely to my work computer. The shortcut alt + tab does not work with the remote computer. When I hit alt + tab when in the remote computer, it will show take me out of the remote control in my computer is open programs. He used to work, but I don't know what happened. How to restore this function?
Hi Michelle,
Thanks for joining us out on Microsoft Community Forums.
According to the description, it looks like you are facing a problem while access Atl + Tab using the remote connection.
The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:
TechNet: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro
For any help about Windows, you can still post on the Microsoft Community Forums and we will be happy to help you.
Maybe you are looking for
-
How can you save the image to a google map that is contained in a Web site?
How can you save the image to a google map that is contained in a Web site? I use a macbook at the beginning of 2011 pro and functional on OS X Yosemite 10.10.5. I would like to capture the image of the map and print it with a good quality.
-
I don't know if this is the place to ask for assistance, but whenever I try to use my Microsoft Media Player, I get a notice that it has stop working and it stops. Any suggestiions?
-
Hey there, I downloaded Visual studio 2015 yesterday and shows this message Please help downloading from the internet will not work NB:mine is not an ISO file.
-
I can find two hard drives, but he did tell me that one is the 500 GB or 250 GB. Need to get my 500 to the C: drive.
-
How to monitor the status of the application - REST
Hi allI was following the blog using vCAC 6.X REST API - Part 2 - elastic sky to request a REST. I was able to post the request. It returns the response immediately after the successful presentation. How to monitor demand? "The response of the appl