RDP problem :)

Similar Questions

• RDP problem without client

  I have a Cisco ASA 5510 8.4.3 running code with the latest plugin installed RDP. Links on the portal without RDP client worked fine until recently. Now the RDP session will start and display the Windows login, but after the connection, the session hangs and you are immediately redirected to the homepage portal of the ASA. RDP works very well when you are using the Windows client and connected via Anyconnect. This only happens when you use IE with ActiveX. Java still works fine. This problem seems to have started after that Microsoft May patches have been released, but I'm running 8.4.3 so the kill bits issue should not be a problem.

  Hi Allen,.

  If I'm wrong, not the only app that has been affected due to the updated Microsoft's RDP. It is because of the update from Microsoft Security KB 2695962. For more information please visit:

  http://TechNet.Microsoft.com/en-us/security/advisory/2695962

  The resolution can be found to this:

  http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20120314-asaclient.

  Although this link provide a workaround, but I have not seen this work.

  There are two options to make it work:

  1. either uninstall the specified security update

  or

  2. upgrade code 8.4 (3.8) (Note: this is not available on cisco.com) but you can improve the ASA to 8.4 (3.9) interim which is available on cisco.com.

  I do not know if you shared the exact version of the code that you run on your ASA however if you are running

  asa843 - k8.bin, then you will need to follow the steps mentioned above.

  Please try running RDP after trying these two steps and let me know if this can help.

  Thank you

  Vishnu Sharma

• RDP port not listening in Windows Server 2008 standard with Sp2

  Hi all

  I have Windows 2008 Server Std SP2 Domain Member Server...  Since week last sur-quartiers, am not able to take remote control of desktop... But I can't able to Ping on my network server... I have check the setting remotely on the server... It is activated... and also the desktop remotely (Terminal Services) service was launched with success...  I checked my firewall to network for blocking port (3389)... But there is not a lot of block in my network firewall... I also disabled windows firewall on my server... But still, I could not able to RDP... I have also checked my settings in domain GPOS and GPO Local for RDP block... But there is no such active parameters.  I did following the troubleshooting steps, but still the problem persists
  1 Telnet IP_serveur 3389
  Result: Failed to open connection to the host, on port 3389:
  2. netstat - n - a o | find "3389" (i run this command in my server RDP problem)
  Result: nothing displayed (port 3389 are not)
  3 I again & again restarted the server and the Terminal Server service, but there is still problem
  4.i change the RDP port only and restarted the service so that the server, but still problem exists
  5. I checked all RDP associated registry settings, everything is perfect
  Please help me solve this problem
  I need your urgent response precious
  Thanks in advance

  Hello Sheik

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• HP envy printer range: HP envy with Win7 Remote Desktop RDP printing problem

  Hello

  I have a printer HP envy 5530 works well for my laptop.

  When I connect to my Win7 Remote Desktop Server (on which HP envy drivers are also installed) and try printing locally on my HP local printer, it does not work.

  When I look at my local mobile print queue, I see two copies of 'Remote Desktop redirected Printer Doc' contained in the queue. One of the queue said copies and then print. Impression size document in the print queue shows 4 KB that is abnormally low, then the missing documents from the print queue, but are not printed on the printer.

  Note that I have no problem with the same laptop, same Remote Desktop server, but using a different printer (not HP).

  I saw that on several forums (including this one), many users have this same problem but I've never seen a valid response that solves this problem with RDP.

  Any idea?

  Thank you

  I solved the problem by creating a new printer on the local computer and configure the port to the Standard TCP/IP port with the IP address of the printer and the HP Deskjet 6940 driver use. Deskjet 5500 driver may work as well.
  
  The problem is with the specific Envy 5530 driver.

• Problems of bad video driver Y470P for Windows RDP

  Hello world

  I'm having a problem with the video driver ATI/Intel when remoting into my home computer. I use the windows remote RDP Protocol on my work computer and whenever I try to use java or flash, I get an error causing the my browser (this happens with Chrome, Firefox and IE).

  If I uninstall my video drivers and the distance with the default Microsoft video driver, everything seems to work properly.

  Anyone has the same issue or have solutions?

  Thank you!

  You can turn off the graphics card in Device Manager, and if you switch GPU you can do power off.

  Best regards

  Tanuj

• RDP connection on my Windows 2008 R2 server problems

  Hello

  I have problems to connect to my remote server in Amazon web services.

  When connecting, I trust myself to RDP certificate, after accepting the certificate I not be logged on to the server again it back to the RDP connection box.

  Please help me in this regard, given that our main web server.

  Please see the attachments.

  Kind regards

  Ramassamy R

  E-mail address is removed from the privacy *.

  {deleted}

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Problems with printer Redirect/MS OneNote opens automatically to RDP/VPN

  We have a network environment where we rdp/vpn in several flavors of Server 2003/2008.  Whenever we either rdp/vpn in these
  boxes, we get a printer redirect the box that appears several times stating:

  This document was sent to the printer

  Document: Remote Desktop redirected printer...

  Name of the printer

  Time

  Total number of Pages

  It is yet to come when connecting.  In these cases, nothing has been printed by the user.  We usually press ok
  or Cancel to get through this, but the problem is still there in the next journal in which is super annoying.  We can go in
  through the resources local tab in the RDP and uncheck the printer, or go to personalization settings in the task bar
  SELECT and menu properties hide notifications from the printer, but it does not solve this problem and it also prevents our users
  to be able to print over the network.
  Apart from this question, MS OneNote starts automatically during each of
  the journal of sessions via rdp/vpn.
  I found a blog about it, so I know that this issue has been raised by others, but none
  real solution was provided.
  Any ideas?

  http://social.technet.Microsoft.com/forums/en-us/officeitpro/thread/fdb951e5-82a4-46a0-8a74-5677b18094d6

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• LogMeIn Hamachi and RDP Windows XP Firewall problem

  I use Logmein Hamachi VPN over the internet to a PC running Windows XP.
   
  I am able to use RDP to access, but only if I turn off the Windows Firewall.
   
  I tried to access Hacmachi in the exceptions, but I'm still doing work if I turn on the firewall.
   
  I can use RDP over the Local network with the firewall, but not on the Hamachi network.
   
  I would like to be able to find a way to configure the Windows Firewall to be on and enable RDP by Logmein Hamachi VPN access.

  Hi Mr cheese,

  Since he works locally the problem may be with the VPN program I would suggest that you contact logmein support using the link below.

  https://secure.LogMeIn.com/contactus/

• Problem of RVS 4000 RDP

  Hi all

  I have a problem trying to DRP from home to work. IM able to connect to my private network virtual (work), but when I try to DRP for my computer, it is not able to connect. How do I configure my router so it will allow me to connect to my computer using RDP. I don't have this issue when I conect my cable modem directly to my laptop. So I guess that the router must be set up any help would be great

  Thank you

  If you have a VPN, you should be able to make RDP or remote desktop. Are put in place as a gateway to gateway VPN, VPN fast or another Client VPN software? Try to do Port Forwarding and open the service port of the pointing to the IP of the PC address RDP session. I suggest to set a static IP address, so that it will not change. Others, I suggest you contact the Cisco technology support greater focus on your concerns. In my view, that this unit is part of serial company Cisco devices now supports. Try going to this link for other devices of the series business and the site where you can get your hands on Cisco for support:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=switches&message.ID=4273&query.id=27...

• Problem of RDP that RdP does not connect

  Hello

  I have a problem in my network. After installing win 7 in all
  be in my network, systesm disconnect from the network, I mean RdP is
  do not connect not not after awhile, if I toggle power settings in the control panel never & never system are
  RDP connection. If do forever & ever power settings, one of the motherboard gives
  problem. How to solve this problem. If I put never & ever power options is a hard drive problem / motherboard?

  Pls fast response...

  Anil Kumar

  Hi Anil,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• I have problems with the remote (RDP) desktop sessions, I can't get the session to go full screen after being reduced to a minimum.

  I can't get the session go full screen after be kept to a minimum.

  I did the following things to make this work:

  1. Updated the operating system
  2. Check my RDP options to make sure that it is set to mode full screen
  3. I tried 3 different computers that it happens on both of them have every two Windows 7 Professional and both are 64-bit (XP Machines have that happen)

  Details:

  I connect to my company TS servers and application servers (all running 2003 OS). When I reduce the view full screen, via the connection bar, I go back to enlarge the window and I get a window view not a view full-screen. I've only been able to reproduce this on two machines and tested a total of 5 machines Windows 7 Pro. I also tested on a XP Machine and impossible to duplicate. The XP and 2 of 7 machines (who both question) are on a connection, the others are all on separate connections in separate locations. Is this a bug in the program or is their environment I'm missing? Still, full screen has been selected in the display area.

  Thank you

  "There is a kind of"bug"with some resolution which could refuse to full screen.
  the only way to force full-screen mode is by pressing Ctrl + Alt + break.

  Remote Desktop does not return to full screen
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/48d6cb3a-C743-404F-8411-6cedbb858c2c

  http://www.Google.com.au/search?q=remote+desktop+fullscreen+%22windows+7%22&SourceID=IE7&RLS=com.Microsoft:-to the: IE-address & ie = & oe = & redir_esc = & ei = oFmCTYufNIeKvQO-nNjHCA

  See if your problem is also related to video drivers?  He has other suggestions in the links, the first is XP, but the last one is Windows 7.

  "Hey Alshrim I thank you for your help. I've just updated my video driver and the remote connection started working: Dstrange and interesting! "Thank the people who helped me.

  Remote Desktop is not connecting
  http://www.Tek-Tips.com/viewthread.cfm?QID=1591106

  Issue RDP
  http://www.Tek-Tips.com/viewthread.cfm?QID=1593827

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• How can I solve the RDP and SQL problems after cloning of a paralytic?

  I got a job Server 2008 R2 system running SQL Server Enterprise 2012 all on an 8 G/4CPU VM and did a ' copy to ' VAPP Cloner.

  The new VAPP has been on one VLAN separated. During the copy process, customizing of comments was shortlisted, and I gave the new virtual machine, a new name for the machine. I can access both VLAN via my WIndows 7 x 64 desktop client OpenVPN.

  So far so good, I could use the vDC to log on the new machine of vApp using my previous administrator credentials.

  I found myself with two problems though...

  (1) none of my previous connections will work with SQL Server, when I try to launch SQL Server Management Studio. I get a message saying "Connection failed for user 'newmachine\user'" so maybe the MSN usr for duplicate users are not the same as the original sid user? I think that he could not tell the difference, if everything has been cloned and the machine name has changed.

  (2) my RDP 7 Windows client does not connect unless I have configure the new server to allow "a MOP" instead of just "Network Level Authentication" that has been configured on the original server that I cloned from. When I activate "all RDP" I can RDP into the cloned fine system.

  The cloned machine had the new name of the machine and a new SID assigned by the cloning process. The original and clone are on VLAN isolated and cannot see. Both not use areas and working groups.

  If I leave the cloned server THAT RDP "NLA" value only as the original server, my Windows 7 client gets a message complaining that RDP does not support the NLA for the cloned machine. RDP works fine connecting to the original server that still has not specified NLA. The RDP instance that says I need enabled NLA, watch NLA is activated in the about box.

  Someone at - he saw either of these issues? Any suggestions?

  Thanks, Dave

  Hi, my understanding is that sysprep does much more than simply by changing the SID of the box, it will also use the SID to regenerate the local MSN accounts system which is problably the origin of the problem, you're experiency. This is done for the security reasosns avoid guests who have accounts with the same sid on different machines. There is a tool called newsid that changes the SID of the server and let the system SID accounts because they were, but it has been known to have other issues but allow him to achieve what you want? I thiknk MS have retired it now, but you can always download on the net.

  If you need get SQL running sysprep and want to automate the process to set up your DB and users following post useful:

  http://msdn.Microsoft.com/en-us/library/ee210754.aspx

• ProBook 430 G1: Problem hp Client Security 8.3.14.2018 and RDP Windows

  Hello

  Yesterday, I upgraded Hp Client Security to version 8.3.14.2018

  Since then, the OFFICE remote connections to computers do not work W2008 or higher. Validation request but then remains connected.

  A W2003 connects directly.

  If I uninstall the HP Client Security returns to normal operation.

  With the previous version moved not for me.

  Thank you

  Julien-Garrigue says:
  

  It runs from Windows 7 to Windows 10 (8 is included )

  Hello

  New version 8.3.16.2035 solved my problem.

  Thank you!

• Firefox is very slow when you use RDP

  Firefox is fast when you use Windows directly. But when you use RDP it is very slow. For example, empty new tab takes about 6 seconds to open. The RDP connection is fast and another response programs immediately (for example the same page navigation in IE is fast).
  What is the problem with Firefox?

  Could it be the graphics hardware acceleration?

  You will need to probably restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.). On the remote system:

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  Then restart Firefox. Does make a difference?