Problems with printer Redirect/MS OneNote opens automatically to RDP/VPN

Similar Questions

• Problem with printing in format Adobe acrobat, DC

  Help

  I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC

  Since some day´s a can´t print my documents in Adobe DC.

  What I did:

  0 reinstall new driver for my printer

  1. New Installation of Adobe Acrobat DC

  2. Installation of the New Apple OS X el Capitan software.

  3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.

  4. all other software can use the printer on my system.

  Important: before that I had problems with printing works I didn t have had problems.

  What can I do?

  Thank you

  Neugebauer, Germany

  Hi frankn30090339 ,

  Sorry for the inconvenience.

  You can download the latest patch that contains the resolution of this problem.

  Please see this link: failed to print in Adobe Acrobat format

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.

• Problem with the redirection email Yahoo after installation of nine updates

  Original title: problem with transfer of emails after having installed new updates

  I installed the windows updates nine but a few days ago since then have had a problem with the redirection of emails coming into my inbox on my BT Yahoo mail account. When I get the Outbox until you find at least half of the time the "add recipients" does not work despite all the efforts, which means that I would put in manually email addresses (long and painful). My windows mail forwarding system seems to work OK. -Wood Marcus * address email is removed from the privacy *

  Hello

  1. What were the updates that have been installed on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  2. don't you configure e-mail account Yahoo BT in any e-mail client? Example: Outlook, Windows Mail.

  3. you use Internet Explorer to access BT Yahoo mail account?

  If you have configured the account BT Yahoo mail on the mail client, post of additional information to help you more away or well you could contact Yahoo Mail Support forums to help you best. Check out the following link.

  http://answers.Yahoo.com/dir/index?link=list&SID=396546091

• Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

  I recently tried to remove malware on my Vista based laptop Toshiba.

  
  

  I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

  I found that the best place to ask this type of question is here: -.

  http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

  There are some very good people out there who helped me (successfully) on 2 occasions.

  Good luck.

  I'll be interested to know how you go.

• Problem with power settings during the opening of Windows Media Player 12

  Original title: power options Windows Media Player Exchange

  WMP 12 of opening causes the power option for monitor turn-off time to return even if the time is 2 hours 15 minutes. Tried to reset the value, value save, all electrical energy plans by making the same, nothing is done.  Other set values, for example disk hard turn off (never set) will be defined and stay together.  Would have someone seen this kind of thing?   Operating system is Win7 Professional 32-bit.  All available updates have been installed.

  Hi Jim,.

  Please contact Microsoft Community. I understand that you have a problem with the power settings when opening Windows Media Player 12. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem only occurs when Windows Media Player is opened?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:
  1. incorrect power settings.
  2 conflict between third-party applications.

  I suggest you try the steps listed here and check if it helps:

  Method 1:
  Run Troubleshooter of power that will check if the basic power settings are set properly or not.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, restore to the default settings for power management. Check if it helps.

  Note: try the following steps only if you have not tried before.

  Step 1:

  To restore to the default settings power management, follow these steps:

  1. Click Start.
  2. In the search programs and files box, type cmd.
  3. Right click on CMDand then click run as administrator.
  4. At the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  5. At the command prompt, type exit to exit the command prompt.
  6. Restart the computer.

  Step 2:

  Once the plan of power reset by default, you can create a new power plan and the same customize according to your needs.

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Method 3:
  If the problem persists, set up the computer in a clean boot state, and check if that helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows:
  http://support.Microsoft.com/kb/929135/en-us

  Note:  After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Hello, I have problems with Adobe Creative cloud to open it in Windows 10

  
  

  Hello, I have problems with Adobe Creative cloud to open it in Windows 10

  Please try run as administrator. Is there any message you get at the launch of the cloud creative app?

• Having a problem with the Muse crashing when opening a Web site I designed in Muse.

  Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

  [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

  All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

  Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• HP Officejet Pro 8610: Error code problem with printer or ink system

  sent a fax Monday very well and now I'm going to use printer & fax to search for these words in the window:

  "There is a problem with the printer or ink system. Stop printer, then if the problem continues contact HP. »

  I had done this several times as well as other things that HP troubleshooting suggested.

  Hi @MrsQT,

  I see that you get an error on the printer or ink system and made the suggested troubleshooting already. I'd be happy to help and find a document for you to review to make sure that you have tried everything: HP OfficeJet Printers - resolve the error 'Problem with ink system'.

  If the problem persists, I suggest to call the hotline to see if you may be able to get a discount on a newer model, or replace your printer if it is under warranty still. HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  If however the recommended solutions solve the issue please click on accept as Solution on this post so that others can find what worked for you.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  I hope this helps.

• HP Envy 4507: Problems with printing wirelessly to my iMac

  The printer worked fine without thread when implemented since January 2015. But this week (early May) I can't print wireless. The printer is on my network. I can access it from the iMac using the ip address in the browser, and it seems OK. I uninstalled the HP utility software and it - redownloaded, but when automatic running connect it does not locate the printer. Printers and fax settings I have deleted the printer and tried to readd it. It locates the printer, but it does not automatically select the driver. I manually select and click Add and I tells me that it cannot connect to the printer. When I try and add it via the IP (even tried with a static IP address) I tells me that the printer is not on my network. As I said before this week, it was fine. I tried most of the things on the forums - even at zero complete remission of the printing system on the printer restore to the factory settings and the system prefs and resettign of the printer itself. My OS is 10.10.3 and I use a BT home Hub 5.

  Hi @DrChops,

  Welcome to the HP Forums, I'd love to help you with your envy 4507. We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If please remove and re-add the printer now and let me know if the feeding cycle solves the problem.

• HP 710 C WIN 7 64 BIT - problems with printing

  Hello

  I have win7 64 bit and problems with the installation deskjest hp 710 c. I've used drivers from microsoft windows update and still my printer stay calm. Now, I have no idea what to do... ?

  For example: I open the word document - press 'Print' - but memory printer is empty

  Any ideas?

  There is a patch that solves the problem available here.

• Problem with printer, exported to PDF

  Hello, I have a problem with my printer to work. I recently installed acrobat from adobe pro xi. And from a pc, we can use option of the printer to export PDFs, but on the other, we cannot. It reports a problem in the system. So I uninstalled the program and reinstalled after a while but the same problem bulging guard.

  It says this:

  

  I don't understand what is the exact problem because the installation was made in the same way to this computer than for others and that they do not appear this problem.

  What you think is the source of this problem and what can I do to fix this?

  Thank you very much for taking the time to read this also.

  Nevermind guys, I understand it. For all of you who have the same problem, the solution is:

  1 open my computer and navigate to: C:\Windows\system32\config\systemprofile (per-folder if it is easier for you) and check if there is the Desktop folder.

  2. If there is no such thing as the Desktop folder, and then create a new folder and rename it to desktop or copy it from C:\users\Default\Desktoplocation.

  Note: C:\Users\Default is hidden by default

  Hope that helped :D

• Problem with printer or ink system failure

  I have a HP Officejet 6600, and I get this message:

  "There is a problem with the printer or ink system.  Turn the printer off, then on.  If the problem persists, contact HP. »

  Well, I did it.  I have also run the hardware diagnostic tool, which had me unplug the printer and turn it back on, and I did it a couple of times.  I always get the error message.  I also took printhead of the printer and put back them in.  Does anyone have a solution that might be able to share with me for this problem?

  Thank you

  Melinda

  My problem was solved by the link in the first reaction after my post. I tried power downs and plug the tire, but following this post EXACTLY... worked. The method of pulling on the power cord of the printer with it cleared the error message and everything has worked perfectly since