Re: 46TL968 crosstalk / ghosting

Hi guys! Had some problems of crosstalk/ghosting with my Toshiba TV in 3D SDS.
When my PC is the source of movies, I get crosstalk that annoyes me. Overscan on my PC is at 0%, my TV uses the crop "native" method and the photo mode is "PC."

The strange thing is, when you use a USB device and don't play movies from this source, there is no cross-all discussion!
Don't know where is the problem, the side of the PC, everything should be good.

Summary just for your question:

The effect of persistence, but also vertical lines appears only if you connect the PC to the TV and only if 3D is enabled.
These problems don't appear if you use the s Toshiba TV internal drive (using USB flash memory key) or if you connect another device (PS3).

Is this correct?

A number of questions:
Have you tested different HDMI ports?
The TV supports 4 HDMI ports. I recommend you all.

Have you checked the display resolution and Hz settings for external monitor in the settings of your computer?
I highly recommend doing that. Manual page 91 provides details on PC signals supported through the entrance to the PC!

The PC input on this TV only accepts signal formats that are compatible with VESA DMT.
Some input signals PCs is different from the resolution and described the frequency and so the phenomenon as incorrect display, detection of fake format, picture position down, blur, or jerks can occur.

Another fact:
The TV automatically switches to 3D mode when 3D signal is detected.
Check the TV s auto start mode (this mode control that makes the TV, when it detects a 3D signal for more details user manual page 28-32) otherwise, you can change the display mode by using the 3D button.

Finally, the format of the 3D signal can be together by side by side (SBS) or mode up and down (TB).
You will need to choose the right format if the TV can not it automatically detects see switching display mode or by selecting the 3D format.
http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/TL968-4046-English-specific.PDF

When it is not getting signal from 3D format, display mode is not passed to 3D and if the format and the appropriate mode are not selected, 3D image is not displayed correctly.

Tags: Toshiba

Similar Questions

  • 3D is cut in two and not focused on Toshiba 55L7453D crosstalk/ghosting

    3D is a little displaced, cut in two, not well centered.
    It is not comfortable, after 3-5 min. to watch, I have a headache.

    System No. 2014-052.
    Latest firmware 8.1.88.07.01.1. MBOOT worm 00813201.
    Reset after update. But the quality was the same with the old.

    I tried through TV Media player with USB 3.0 Flash memory, via DLNA, also via HDMI and PC server.
    I checked it with 42 L 7453 and 47 L 7453, same result.
    When I check with some LG TV, the result is clear and perfect, without eyestrain.

    Test The animation. Amazing.Spider.Man.2.2014.3D.1080p.BluRay.Half. SBS - HSK.mkv3D subtitles are doubled slightly on the background and the details of the photo are not as strong. Moving with the letters of the subtitles.

    All the settings for the 3D - verified.
    Internal 3D model is moved too.
    I see slightly double picture if I look with one eye, with the glasses, of course.

    -More than 2, 10 m distance.
    Front horizontal view.
    Terrible crosstalk with videos youtube 3D test too.

    I was impressed by your product, but now I am so disappointed in 3D.

    Thank you in advance!

    I don't have no workaround for you, but I recommend you to check the manual start of the user to page 26.
    http://www.Toshiba-OM.NET/PDF/manuals/LCDTV/English/Country_Specific/L7453-424755-English-specific.PDF

    There, you can find all the details on the 3D features.
    The TV supports different settings and you can adjust the and change the 3-d effect, but also the other options as the Test pattern 3D which makes sure the angle of vision.

    Depending on the content, affecting the 3D effect at a high level may result in blurred the contours of the image and the background.

  • Ghost of compressor trails:(aide!!)

    Help! I have a deadline next week

    The compressor is still weird... I'm compression 4 k stuff on dvd and it looks great so far, but only a little problem there is much movement in my film, it of a dance show and no matter what I do, there are Ghost trails on final dvd images other than those that looks very useful! I tried almost everything and so far nothing works... I did a lot of tests and he burned them to test on a DVD TV funny, it's 10 minutes of film with a lot of movement looks great after having been compressed on dvd... but the whole project 1 hour using the same setting a lot of ghosting trails my images is 24 fps or 23.976 something like that... Yes I tried to change the fps too... also tried the game ibbp and ibp

    What is the codec of the 4K source file?

    Russ

  • I have emails ghosts

    AS you can see from the photos below, I have emails ghosts in one of my email accounts that started when I updated to 9.3.5. I would go to the email and it showed 1 unread email, but there was no e-mail. Now it is showing 3 unread emails and there is no emails. I tried everything to get rid of it but it does not work. Can someone give an overview of what's going on? I registered on my account where my email is and there is no email. I deleted junk and trash and erased all uo, but it doesn't do a thing at the level of the mail app on my iPad. Any help would be greatly appreciated. Is showing 3 unread, but as you can see, there is nothing there.

    You could try to remove and re-add the e-mail account. Force quit the Mail app that could also help.

  • IPhone with Ghost touch issue - warranty claim

    I have an iphone 6, which was good for me, so I have no receipt. The phone was initially purchased in the United Kingdom. Recently, I noticed ghost touch which is almost what makes the phone unusable. Since I reside in Pakistan, I sent my iphone in Dubai to claim under the guarantee, but the Apple Store refused the claim on the unavailability of the purchase receipt (warranty is valid until March 2017). As far as I know if the warranty is valid Apple store should not refuse the request. Please suggest what I need to do.

    Warranty is not international and has never been. In your case,.

    the positive point is that since the iPhone has been

    bought in England, your warranty is valid in any country of the EU.

    You must be personally hold the Apple iPhone in an EU nation or

    Send to a friend/parent/co-worker in a nation EU for them to take

    Apple, then the friend/parent/co-worker can return. Apple

    do not accept international shipments of assessment or will Apple

    ship abroad after the repair or replacement.

  • My iMac display leaving 'ghosting. '

    I have a mid 2015 27 "iMac refurb and sometimes windows that I closed leave them a kind of"ghost image"of the left on the display window. He ends by goes, when I open a new window or a little more time. Is this normal or my screen need to be repaired? Does not seem normal.

    Avoiding persistence on Apple displays - Apple Support

  • uncontrollable iPhone - ghost key

    Hello

    Here you can see a video of my iphone 6 which is out of control. It's like a ghost touches!

    https://youtu.be/nhyjH38wA4g

    My phone have between 1 and 2 years, so Apple is ok to say that the phone is in excellent condition (no shock, as if it is new) but they tell me they can do anything for me! I'm really worried about it. The phone is for the second time to Service my operator Bouygues Telecom... During this time, I don't have my iphone and I am a professional photographer, it is really difficult and annoying to not have my email, my gps, my music, my contacts and so on.

    For me, it's really like planned obsolescence...

    I am a buyer excellent apple with my iphone, ipad air 2 and the imac 27 "...

    I think that the operator is not the good computer and information to make the right decision on my phone. Only Apple can do.

    Have you tried the basics of manual?

    reboot, reset, restore from backup, restore as new

  • Internal display flicker, ghosts, black flashing

    When you open the lid, the screen started "seers" black, I hear by then the screen will turn on and off, but when on, only show a black screen.  You can see what I mean here. When the internal display turns off, external displays for one second lag.

    Sometimes, the internal display will show what is actually on the screen, but it will flicker severely and superimpose a ghost of the screen on to halfway to the bottom of the screen, visible here.  External poster work very well, although they tear sometimes for a millisecond or two.  The computer works fine, I just can't see what I'm doing.  I am posting this from the computer using an external monitor.

    Steps than to attempt to resolve, I took:

    -J' test to see if it's a problem that the operating system sees or simply the screen by making an entry using Quicktime screen, and no problem in the recorded video.

    -Apple diagnostic test revealed no problems found (reference code: ADP000)

    -Reinstall OS X several times

    -Starts in Bootcamp, same problem with the internal display

    My thought is that it's a bad display cable, the screen inverter or any other Apple diagnostic Test does not cover.  Thanks for any help you can provide!

    Data sheet:

    El Capitan 10.11.6 (15G 31)

    MacBook Pro (retina, 15 inch, mid-2015)

    2.5 GHz Intel Core i7

    16 GB 1600 MHz DDR3

    512 GB SSD

    AMD Radeon R9 M370X

    Hello CAWeissen,

    Thank you for using communities of Apple Support.

    I understand your message that your MacBook Pro screen flashes only a black screen, but you can use external screens without problem. I know how much I use my Mac and using an external display is nice, but I do not always want to use a. You did a lot of great troubleshooting so far! An extra step that I would recommend would be to reset the NVRAM.

    This article includes the steps to reset the NVRAM:

    How to reset the NVRAM on your Mac.

    Reset the NVRAM

    1. Stop your Mac.
    2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
    3. Turn on your Mac.
    4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
    5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
    6. Release the keys.

    Also, just in case it turns out to be a hardware problem, we want to ensure that there is a current backup of your computer information.  For more information and creating a backup, check out this article here:

    Use Time Machine to back up or restore your Mac

    Best regards

  • Multiple tabs open when I clik a link to a new tab. Then, do not open or even appear when I try to close with "close all tabs"... they are like "ghost tabs.

    It spent last few days... the tabs are displayed on the tab bar, but do not open upward or close when I try to close... when I tried "close all tabs", who says so "you try to close the 2 tabs", they are not counted as being open... the only way I can get rid of them is Firefox is completely closed and then it starts again. Ghost tabs!

    I solved the problem, but not using the "safe mode".
    After going into safe mode and close and open FF again;
    I then had to dl the latest version of FFox... 33.0 (I had 32.0) online, a friend told me there was an update for it... found 33.0.1.i and dl who had, then restarted my computer.
    I found that the new version had removed many of my fave on my 'personal bar '... icons I have them back by going to this:
    'Classic theme restaurateur' found in 'modules '.
    I didn't add "colorful tabs" again...

    In addition, an easy solution... my mousepad has been 'sticky'... by removing just, my mouse works much better on my desk...

    now, everything is back to normal... no pop up several tabs, even in typing emails is better now as well.

  • Parts of low Ghost in my track?

    This got me really puzzled.

    I deleted my audio file of my bass track by mistake and saved the project so I couldn't get it back.

    Rather than do all the lower part again, I copied and pasted a different saved version of the project that I had. No problem. However, in the middle of the song my stuck low part plays very well, but I hear some low playing under the main track low but, when I solo all titles including the bass gtr track, there is no part low ghost to be heard! I tried to remove the glued lower part and the lower part of the Ghost is still there.

    Helllllllllp! Please, I beg you.

    You can attach a link with your project?

    WeTransfer.com (send to yourself then paste link for us to download)

    or use everything you know...

  • Ghost in the dialog icon

    After you have reinstalled El Capitan 10.11.5 on an SSD using the migration wizard, the trash - which was old placed in the sidebar - became a useless ghost folder pointing to nothing.

    Attempt to remove reboot and 'com.apple.finder.plist' and 'com.apple.sidebarlists.plist' prefs had no effect on this icon.

    No idea how to remove it?

    Remove the sidebar folder and then add it again.

    Under go in the menu bar, select go to folder enter > ~ /. Trash

    Trash in the Finder window, select the gray.

    Under file in the Menu bar, select Add to the sidebar

    You may need to reboot for the changes to take effect.

  • Cannot remove the ghost folder. Error message: there is no such mailbox

    When I configure Thunderbird to connect to my Alpine Webmail, I had to rearrange my folders. Cannot remove a folder titled "mail" because according to TB "there is no such mailbox" but still shows on the tab my folders. I read through the previous discussions and have tried to unsubscribe the ghost folder, but that did not work or the other. I have a Mac OSX if this affects what it is. Please let me know if you have any suggestions. Thank you.

    Hello world. I solved the problem... somehow. By removing the account of Treasury Board and put in place again, TB has been able to sync with the files that were on Alpine. The ghost folder still presented (despite not existing not not on the Alpine site), but by changing the directory to the IMAP server of "mail" to "mailbox" the ghost folder disappeared. I found myself with records who have been named oddly (most likely due to the change of the name of directory) so when I changed the IMAP server directory to "mail" it reset my files with the way they were, with the exception of the ghost folder, that was no longer there. I'm not entirely sure why it worked, but in case someone else has a similar problem, I recommend to give it a try.

    Thank you all for your comments and help.

  • Cannot open/close the tabs that are part of an open folder - as of ghosts

    When I opened a new tab, sometimes 2 or several tabs appear and cannot be closed and then this page is not able to be visited. They are as ghosts - they appear, but you cannot open/close them (they can be pinned, however, but still not able to be read). Thank you

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • Photos of Ghost in picture 1.1 with El Capitan

    Hi people.

    There is a curious problem happening with my Mac Air with pics 1.1 and el Capitan OSX: I have a long backup of photos upwards since 2002 up to today and always followed the improvements suggested Apple, including iPhoto migration into Photos some time ago.

    Now, I realized that a specific set of photos taken in 2014-2015, with an Iphone 5 and imported from a Canon EOS digital camera seems to be there, but is missisng. I mean, they appear in the photo files, have all visible metadata, but the placeholder for the image itself is empty. You can mark them as Favorites, see the metadata of each of them, include them in a slideshow, but they are single spaces. And if you try to export, Photo said that they are not there.

    There are a lot of precious moments of trips that won't again in these photos, and I'm struggling with the idea of losing it for always.  Anyone know the trick to get back them? I have TIme Machine backups since about 2013, but since I don't know when it happened, I can't go back all my stuff for 2014 just to retrieve those pictures. I use the machine to my daily work...

    Everything is ok, except for the missing images! Ghost photos!

    Help!

    Carlos Nobre, Brazil.

    You can update the pictures of the current 1.5 version.

    If you have enabled iCloud photo library, they could not synced to your computer. They sow upward when you double-click one of these images to see full resolution?

    You can also try to repair your library by pressing Option + command keys.

  • Why I can't delete what seems to be a 'ghost' bookmark in my bookmarks Menu?

    I have a very special input of bookmark in the bookmarks Menu which appears to be an entry of some kind of ghost. I see the entry, but it doesn't have an icon of a folder in front of him as do other bookmark entries. In addition, even after I point out this particular bookmark, I can't right click and go to the site, or remove this bookmark. Indeed, the name and Description Panel below bookmarks don't is not updated when I select this particular bookmark.

    How can I remove this bookmark "ghost"?

    I have a screenshot of this article 'ghost' and correct entries above and below if it would help, but I do not see how to attach an image in this post.

    Thank you.

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

Maybe you are looking for

  • All of a sudden my tab groups do not work with 16.0.1. That's happened?

    Before installing the 16.0.1 updated, I had a specific tab group open, among several that I maintain for different projects. (I could pass freely between tab groups in 15 FF.) After installation, the tab group button does not open the Panorama view w

  • Satellite A100 - 386 Bluetooth is compatible?

    HelloDoes laptop A100-386 a bluetooth facility? If so, how to enable it. If not, how have it installed.

  • Remove the banner of Conversation Windows "stay together".

    Good then Skype added this thing of banner advertisement (see screenshot) to the conversation window and it drives me crazy. It is not the ad itself, but the fact that it "seems" every time I restore a conversation window that has been reduced to a m

  • problem in the game 3d

    My motherboard comes with intel 82845 G graphics controller. I installed the latest graphics driver. When I start to play a 3D game after 5 minutes, it freezes up. and when he answers, it shows that a video driver named ialmrnt5.dll has stopped worki

  • as puedo hacer para solucionarlo

    Ideas: Programs are having problemas con Error messages Los cambios recent made in su equipo What is han intentado did el problema Means - This is a foro Público para no publicar nunca privada como el correo electronico o phone numbers information!