Re: AP_ACCOUNTING_EVENTS_ALL with not data for the invoice in R12

Similar Questions

• I am trying to download my software elearning in my account and it shows no download available, even if I paid for it and the data of the invoice is there. any help?

  I am trying to download my software on e-learning in my account and it shows no download available, even if I paid for this and the data of the invoice is there. any help?

  Oh, Yes, well, if you're talking about e-learning 2.0 Suite... it's several years old... I don't know if Adobe has no download access user around holding method for that long... or even until the next version of the product is released... especially these days with the preference of creative cloud.

  Always take the downloads, you have access to and store their future use yourself

  You can try this (which came in another post on this forum):

  Download the free trial version Adobe Elearning Suite | Adobe Elearning Suite 6.1

  But it is for the latest version of eLS, not v.2.0. It can be a real challenge to find the installer for v2...

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• Problems with sound and Audio - realtek hd audio is not compatible for the audio device

  I use Windows XPand receives my sound and audio to work, I got a lot of response to this problem, but not the right answers, I got my sound set correctly but my audio does not work. In my default audio device is defined as realtek hd audio that is not compatible for the audio device, I tried to remove it without any success because I don't know what else can be done to solve this problem. I did an update can also be found a update driver for my sound card in windows. I also run microsoft fixi it and said that my default audio device is wrong, I tried to change, but nothing seems to work. Before that my computer was working fine and now all of a sudden nothing works. Everthing is up-to-date on my computer except the I'm having problems. all I ask you, how can I removed realtek hd audio since I graduated from the audio device by default.

  Thanks for a quick reply.

  Hello

  You will remember to do recent changes to the computer before the show?

  I suggest you to download and install the latest driver audio realtek for Windows XP from the link and check if the problem occurs:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• T610 with Windows Embedded 7 - the system does not license for the operating system image

  Hello community,

  I bought a refurbished computer ThinClient T610 that is running a Windows 7 Embedded English. The label on the package says, that the computer ThinClient is allowed with W7E. When I now run Easy Tools installed on the computer ThinClient hp to create a USB Image with the German language, everything works fine: the image is downloaded from the web and put on the stick.

  But after you start the stick, the installation program tells me: "the system does not license for the operating system image. What I am doing wrong? The BIOS is already the latest.

  Or y at - it another way to transform the operating system in German? There should be an option to download additional languages, but this particual window has no other options. And I have not found any manual way to download other languages.

  Concerning

  Michael

  Sometimes it can be so easy... ;-)

  So here's my solution:

  1. go on the Web for hp Support site

  2. go in the software and driver download

  3. set the language of driver on the language of your choice (in fact: it was the main problem)

  4. download an operating system image

  5. run the configuration tool and copy the image of an operating system on a flash drive

  6. restart the workstation and install the os

  7. take advantage of your computer ThinClient in the language of your choice

  I don't know, why the hp Easy Tools downloaded the image of evil, but with this solution, that I find myself at the same point, as if they did.

• model from 2012 to 2015 date for the meeting?

  Has anyone heard of an old model of Macbook Pro with a date of the current Assembly?

  Not one, but two of my colleagues recently bought Macbook Pro of the Best Buy Web site, thinking they were getting a good deal. But when they complained to me about the slow performance, I told them that the Macbook Pro have been 2012, not 2015! The bodies of these laptops are certainly the 2012 models - they have internal SuperDrive and same port configuration. And yet when we ran the serial numbers, they have all two current AppleCare. No place on the Web from Best Buy site he mentioned that they have been renovated, either.

  I went to www.powerbookmedic.com and it was even more detailed information:

  Model number:

  	A1278
  Number of sales:	MD101LL/A
  Machine number:	MacBookPro9, 2
  Dimensions:	12.78 in x in x 0.95 in 8,94
  Weight:	4.5 lb
  Production:	June 11, 2012 - present

  Based on your serial number, your device is a model of Mid 2012 and was assembled on:

  Year of production:	2015
  Week of production:	46 (November)
  Production number:	700

  Anyone seen this before? How can a body 2012 have been assembled in 2015? This means that they are refurbished? Why is the date of production always open for this model?

  Any help is greatly appreciated!

  This model has been in continuous production since its introduction. I see it as a credit to the value and reliability of this model. Apple uses dates to indicate when changes have been made, not the time period. If you buy Apple, you get a new unit. I can't say that about Best Buy.

  This isn't like cars where something changes every year. It is rather old Winchester rifles. The Winchester Model 1894 is still in production with only a minor change in the name of model 94.

  I believe that this model has been in continuous production longer than any other Apple product. You can always a "built to order":

  http://www.Apple.com/shop/buy-Mac/MacBook-Pro?product=MD101LL/A & step = config

  I have this model in the "basic configuration" purchased directly from Apple as a refurb in 2013 and it is not slow. It came with OS OS10.8.5 Mountain Lion and today runs the latest OS version 10.11 without complaining. I hope that Best Buy have not previously installed some unnecessary anti-virus or the operating system on the computers of your friends.

  It is always better to buy a Mac directly from Apple rather than through the limited number of dealers, they use.

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• Why the date of the INVOICE is different from the date of the ORDER?

  Something weird is happening... I get notifications of workflow of the Business Catalyst for invoices, but sometimes the date of the order is the eve of the invoice. Causing havoc on the side shipping because when I print the invoice, good delivery and export order files, they do not correspond to the top and sometimes customers are duds.

  No idea why the date of the invoice would be different from the order date and how do I do to make them the same?

  Thanks in advance!

  Hey there,

  An invoice is not an order. It's an important thing to know.

  An order is generated by a few ways but especially as soon as a product is added to a basket - this order exists and that date. An invoice is a purchase and comes from an order.

  You create an order in the admin and save it but add no invoice number. You can see that you have just made an order and you'll see the button to generate the invoice.

  API may make an order and no invoice, a person can add items to the basket and finish the next day if they have their session open that long... Many reasons why these dates may differ.

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• Process to get Performance data for the managed entity c#

  Could someone please describe the process for pulling data from the API performance?  The documentation seems a bit muddled.

  Qustions:

  Should you create a custom interval perf or you can use the default settings?

  If I have a performanceManager MOR and a hostSystem MOR what methods should I call on the PerformanceManger object to retrieve the performance counters on the managed entity? I'm trying to get ready time % of a host.  Looks like I need to use the QueryAvailablePerfMetric method to draw the MetricID and then use the QueryPerf to shoot the actual static...

  Any help is appreciated.

  VirtualFisk

  You can use available perfIntervals to extract data.

  You have reason to extract performance data, you must first call QueryAvailablePerfMetric to get metricIds and then pass them in the appeal of QueryPerf.

  Also to check whether or not real-time data are available on the entity you must first call QueryPerfProviderSummary on entity and check the PerfProviderSummary currentSupported property. If she defined as true, real-time data are available and you can pass PerfProviderSummary refreshRate as intervalID in your QueryAvailablePerfMetric call and still pass this refreshRate as intervalID PerfQuerySpec for QueryPerf appeal.

  Please see following code snippet to retrieve data for the managed entity HostSystem (hostMoRef), you can replace it with a managed object of an entity reference

  
  
  
  
  
  
       int counterID;
  
  
              int key;
  
  
              String group;
  
  
              String name;
  
  
              String rollup;
  
              ManagedObjectReference pmRef = _sic.perfManager;
  
  
              PerfCounterInfo[] cInfo = (PerfCounterInfo[])getObjectProperty(pmRef, "perfCounter");
  
              Hashtable PerfByID = new Hashtable();
  
  
              for (int i = 0; i < cInfo.Length; i++)
  
  
              {
  
  
                  key = cInfo[i].key;
  
  
                  group = cInfo[i].groupInfo.key;
  
  
                  name = cInfo[i].nameInfo.key;
  
  
                  rollup = cInfo[i].rollupType.ToString();
  
  
                  Console.WriteLine("ID: " + key + "    group:  " + group + "." + name + "." + rollup);
  
  
                  PerfByID.Add(key, group + "." + name + "." + rollup);
  
  
              }
  
  
  
  
  
  
  
  
        Console.WriteLine("\n---------------------------------------------");
  
  
                      Console.WriteLine("Entity: " + hostMoRef.Value);
  
  
                      PerfProviderSummary perfSum = _service.QueryPerfProviderSummary(pmRef, hostMoRef);
  
  
                      Console.WriteLine("Refresh Rate" + perfSum.refreshRate + "\nCurrentSupported :"
  
  
                                        + perfSum.currentSupported + "\nisSummarySupported :" + perfSum.summarySupported);
  
                      Console.WriteLine("Fetching Perf Metric Ids");
  
                      DateTime curTime = _service.CurrentTime(_svcRef);
  
  
                      DateTime beginTime = curTime.Subtract(new TimeSpan(1, 0, 0));
  
  
                      DateTime endTime = curTime;
  
  
                      int intervalID;
  
  
  
  
  
                      if (perfSum.refreshRate < 0) {
  
  
                          intervalID = 300;
  
  
                      } else {
  
  
                          intervalID = perfSum.refreshRate;
  
  
                      }
  
  
                      intervalID = 300;
  
  
                      PerfMetricId[] Ids = _service.QueryAvailablePerfMetric(pmRef, hostMoRef, beginTime, false, endTime, false, intervalID, true);
  
                      if (Ids != null && Ids.Length > 0)
  
  
                      {
  
  
                          Console.WriteLine("Ids fetched from QueryAvailablePerfMetric API are:");
  
  
                          for (int k = 0; k < Ids.Length; k++) {
  
  
                              Console.WriteLine("ID is: " + Ids[k].counterId + " Instance is: " + Ids[k].instance + "Name is: " + PerfByID[Ids[http://k].counterId|http://k].counterId]);
  
  
                          }
  
                          PerfQuerySpec qSpec = new PerfQuerySpec();
  
  
                          qSpec.entity = hostMoRef;
  
  
                          qSpec.metricId = Ids;
  
  
                          qSpec.format = "csv";
  
  
                          qSpec.intervalId = intervalID;
  
  
                          qSpec.startTime = beginTime;
  
  
                          qSpec.startTimeSpecified = true;
  
  
                          qSpec.endTime = endTime;
  
  
                          qSpec.endTimeSpecified = true;
  
  
                          qSpec.maxSample = 1;
  
  
                          qSpec.maxSampleSpecified = true;
  
                          PerfQuerySpec[] qSpecs = new PerfQuerySpec[] { qSpec };
  
  
                          if (hostMoRef != null)
  
  
                          {
  
  
                              PerfEntityMetricBase[] perfEntity = null;
  
  
                              perfEntity = _service.QueryPerf(pmRef, qSpecs);
  
                              if (perfEntity != null && perfEntity.Length > 0)
  
  
                              {
  
  
                                  for (int i = 0; i < perfEntity.Length; i++)
  
  
                                  {
  
  
                                      PerfEntityMetricCSV pms = (PerfEntityMetricCSV)perfEntity[i];
  
  
                                      PerfMetricSeriesCSV[] vals = pms.value;
  
  
                                      if (vals != null)
  
  
                                      {
  
  
                                          Console.WriteLine("Perf Counters fetched");
  
  
                                          for (int vi = 0; vi < vals.Length; vi++)
  
  
                                          {
  
  
                                              PerfMetricSeriesCSV pmCSV = vals[vi];
  
  
                                              if (PerfByID[vals[http://vi].id.counterId|http://vi].id.counterId].ToString().StartsWith("mem.vmmemctl")) {
  
  
                                              Console.WriteLine("CounterId: " + vals[vi].id.counterId + " Name: " + PerfByID[vals[http://vi].id.counterId|http://vi].id.counterId] + " Instance: " + vals[vi].id.instance + " ----- ");
  
  
                                              counterID = vals[vi].id.counterId;
  
  
                                              //Console.WriteLine("Value in Map: " + PerfByID.get(counterID));
  
  
                                              Console.WriteLine("-------- Value : " + pmCSV.value);
  
  
                                              }
  
  
                                          }
  
  
                                      }
  
  
                                  }
  
  
                              }
  
  
                              else
  
  
                              {
  
  
                                  Console.WriteLine("Performance statistics not available for this entity!");
  
  
                              }
  
  
                          }
  
  
                      }
  
  
                      else
  
  
                      {
  
  
                          Console.WriteLine("Perf Metrics not fetched");
  
  
                      }
  
  
  

• iPad Pro will not charge for the update of iOS10

  I just finished the upgrade and now when I plug in the power cord, I get a message that says: "This accessory is not supported" and it stops to load.  What the *?  I got everything with Apple.  For the price of the iPad, you'd like to think he would hold a charge longer, and now it won't load at all.  It's only 8 months!  Given zero has no effect.

  Hello. You use the Apple charger and cable? Reported other configurations does not. See the iPad is cool the computer after an upgrade to iOS 10.

• Recently downloaded version 9.0.1 and the url is not valid for the default home page. The default home page is still supported?

  I currently have www.google.com set as my homepage, but Firefox says that the url is not valid for the default home page.

  The problem is now solved with the current version of Firefox 10.0. Thanks for the help ccbrunt and SafeBrowser.

• Tried to use iTunes to restore iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the mode of recovery, apple server and the internet. Help?

  I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?

  Error 17 refers to network problems. Take a look at these articles and try the suggestions:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Release date for the RE7000 in Europe?

  Hello

  Quick question, no release date for the RE7000?

  http://www.Linksys.com/us/p/P-RE7000/

  Already register when available

  Thanks for your time,

  Hello. We do not yet have an official release date. We will post updates on our Web sites.

• From what I read, if I buy a commercial version full of windows 7, I am not eligible for the upgrade of $14.95 to windows 8 in about 6 months.

  I'm about to buy a computer with 16 GB of memory. I'll of course need a 64 bit OS, it looks like a good time to switch to windows 7, XP. But windows 7 seems to have a very short life span. The OEM version is eligible for a special download offer upgrade $ 14.95 to windows 8 that seems due Q1 2013, but it seems that the retail version is not eligible for this offer? Like many people I do not upgrade OS every time is out. But why would I pay for an OS which is replaced in 6 months?

  Huh?

  14.99 reduction is a limited offer in time when you buy a new computer between June 2, 2012 and on January 31, 2013, with Windows 7. By October 26, 2012, the PC of all major manufacturers will come preloaded with Windows 8. The thing, it is likely to be the inventory on the market with Windows 7 for a while of OEM brand. If a consumer buys one of them, they should have the eligibility for the upgrade of Windows 8.

  Of course, you can buy the new computer with Windows 7 pre-loaded, acquire the Windows 8 upgrade what becomes availalable and install it at your leisure and activate it whenever you're ready.

  Yes, the retail version of Windows 7 is not eligible for the upgrade 14.99 discount, but you can get an updated copy of Windows 8 Pro for 39.99 beginning October 26, 2012 and ending on January 31, 2013.

  Offers upgrade Windows 8:

  http://Windows.Microsoft.com/en-us/Windows/upgrade-offer

  Windows 8 Pro 39.99 Upgrade Windows XP, Vista and Windows 7 existing users:

  http://windowsteamblog.com/Windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-Windows-8-Pro-for-39-99.aspx