Problems with sound and Audio - realtek hd audio is not compatible for the audio device

Similar Questions

• Satellite P30-145: is not an audio device in 'sounds and Audio devices '.

  Hi guys,.

  I've just corrected a problem with the help of a member of fantastic, but now I have another!
  My speakers suddenly decide to not work! I checked the volume etc. and alll was fine, but when I went to control panel > sounds and audio devices, it says I have no audio device!

  It worked fine this morning and I have nothing done havn't who could have done this.
  These problems I encounter are just spontaneous, I don't know what is happening!

  Anyone know how I can fix it and if nobody suspects the virus activity? (I did a scan that says that I don't have)

  I use a P30 145
  Thank you very much

  Hello

  Have you checked the Device Manager? The sound card appears correctly in the Device Manager or yellow exclamation marks appear?

  Have you tried reinstalling the audio driver? If this isn't the case, please try it.
  Of course, I recommend also updating the anti antivirus applications and scan the system for viruses and malware

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• Server 2K 8 Remote Desktop no despite its "don't bring to the local computer" active, impossible to find sounds and Audio devices?

  I'm running Vista 64 to connect to a remote computer that has Windows Server 2008. When the remote desktop connection via, under the options for sound local computer that I "Make to this computer" activated. However I still get all the sounds, and the volume in the lower right corner icon has a red x on it. Under the heading reading devices, it says "no audio device is installed". In Device Manager, I don't see anything for sound and audio devices.

  I found an article that mentioned the sounds and Audio devices in Control Panel, however I have only 'His' option - which opens the same as right click on the volume with mute icon and choosing of reading devices. I don't see anything on the RDP Audio Driver settings.

  Here's a screenshot of my desktop remotely, with the Control Panel, Device Manager, and open windows of his:

  http://img27.imageshack.us/img27/959/screenshotxqp.jpg

  How to activate the sound remote desktop?

  Hi Tsaton,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is linked to the issue in Windows Server 2008 machine. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  jasonf18090788 wrote:

  I saw on the Adobe site that the video card is compatible with AE Pr, but not work.

  Where have you seen that? It is not on the list of the AE: system requirements | After Effects

  Keep in mind that After Effects uses only the GPU for one, outdated thing. GPU very little matter for AE. See this: features GPU (CUDA, OpenGL) After Effects CS6 and after effects CC

• Problem with Bluetooth and audio playback

  Dear Sir

  I have laptop Dell latitude E5430 with windows 8.1 installed I successfully add the device LG HBS 730 Bluetooth headset all drivers are installed correctly but the sound playback in from not headphone the sound is still come from speakers computer, and sound reproduction apparatus, it has speakers / headphones and headset communication options. Here are a few shots that I join you for a better understanding.

  I'm waiting to hear about the problem

  Thank you

  

  Hello Ahmad,

  I would like to know some information about the problem so that we can help you better.

  Have you tried to connect another Bluetooth device? If so, it worked properly?

  Thank you for details on the question and your efforts to resolve.

  I also realize the inconvenience that you are experiencing due to problem of Bluetooth. I will definitely help you.

  This problem can occur because corrupt driver Bluetooth and settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please run this Microsoft fixit and check.
  See this link:
  http://aka.Ms/diag_device

  If this does not help, use method 2.

  Method 2:
  Please Update Bluetooth and audio drivers from the following link and check the number.
  Reference:
  http://www.Dell.com/support/home/us/en/04/product-support/product/latitude-E5430/drivers/Advanced?OS=w764

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• bottleneck of apparent control "sounds and audio device properties | audio tab | sound

  Lately, this becomes a little more than one gene, to the point where it seems there are already some solution out there : I often want to spend (internet radio or mp3s) music that I send now based Creative Media USB "broadcasting" (home use - audio send anywhere where I could want him in my house)-for a random downloaded video programming.  Video noise must never be sent to the speakers of my monitor-entertainment (although I wouldn't mind if that sound signal should also go through the creative system to other points in the House.)  But it's scary, sometimes I have to play music, to turn on the monitor and sauté with the music of great volume until I can mute or mute the volume.  But it is never necessary for my music be routed to the monitor.

  I drive the monitor via a HDMI cable and adapters changed just after the last of them went wrong, so the new audio software NVIDIA can get complicated this unduly now.  But it seems that the only way for me to join the audio track from any video source given the monitor is to go through the tedious process to navigate to the audio tab and then change the default devices of the Creative device to the NVIDIA device.  If I have already started the video until I realize that I am still set up for music, I have to leave the VCR and the restart before it will route the audio through the HDMI.

  Then of course if I want to stop watching the video source and go back to something with music as a background, I must reverse this procedure as a whole.

  More complicated still is the panic that can ensue when I receive a Skype call - it can be quite EXPLOSION on the monitor speakers.  These levels seem to chronically inadequate because I assume that they share the same slider control as something else (it's still too low volume without be turned up to 11) and are not put to level automatically, or something like that...

  Certainly I'm not the only one annoyed by these audio problems.  What are the solutions are there for these problems?  I would like to be able to choose speakers, based on sources: mp3s and other audio-only stuff would be default to the Creative device, while avi and other video stuff would be only of course exit by default for the NVIDIA card.  Seems kind of obvious... but it does not work like that?

  Hi 808pants,

  You can try to change the settings for the audio mixer Panel to help relieve this problem:

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  In addition, most programs can be configured to use a specific audio adapter. In the case of Skype, you can check the following link to set up Skype:

  http://www.Skype.com/help/guides/soundsetup_vista.HTML#4

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Unless the program is designed to specify the audio adapter, the only way that you can choose where will the audio is by setting the audio adapter by default.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound. Sounds and audio device properties; Volume tab had all the options greyed out. Fresh Windows XP install on existing volume. Many fixes tried and failed.

  I did a fresh install of XP Pro on my intention to use it to my new drive primary secondary drive. After that run all windows updates, SP3, install all of the current drivers, everything works but the sound.

  I'm fairly certain I've found the source of this problem, and I provided a screenshot. As you can see the volume slider is turned down, and all options are grayed out (inactive).

  http://i51.Tinypic.com/2l9mujt.jpg

  Things I've already tried and various Info:

  -Uninstalled/Reinstalled drivers

  -Checked the Audio Windows Service has been activated

  -Launch the antivirus and registry cleaning software

  -several reboots

  -some other stuff I forget

  Thanks in advance!

  Apparently, w/e registry cleaner that I used did not do a very good job, or is just unable to solve this problem.

  I manually deleted all entries containing the word 'creation' in my registry, reboot, installed the current driver, the reboot, I HAVE HER Marie SYLVIE!

  Hope this helps someone else!

• Problem with Avnex Virtual Audio Device

  My sound has stopped working, the computer indicates that the sound plays but Avnex Virtual Audio Device says Windows cannot load the device of this material. The driver may be corrupted or missing (Code 39). I pressed, check for solutions, but nothing, how to fix this?

  Hello

  ·         You have made no changes to the computer until the problem occurred?

  I suggest to visit the link below and follow the steps provided:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  You can also check:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• I reinstalled windows xp.sound and audio devices say there is no audio devices installed.

  Device Manager displays multimedia audio controller, sm bus controller and video controller with yellow? and under properties all say device not configured properly.i I'd appreciate any help, thank you

  Hello clarksdad,

  It seems that you have not installed all the drivers after your new installation.

  Try to install the drivers for chipsets motherboard from the CD driver provided by the manufacturer/supplier of your PC.

  And then you continue with the installation of drivers VGA and Audio.

  For the most part, all these drivers come packaged with the CD provided by the manufacturer/supplier of your PC.

  Thank you and best regards.
  Roger

• Problems with Mechwarrior 4: Vengeance on Vista. Will not play past the launch command

  I loaded Mechwarrior 4: Vengeance on my laptop. I have Vista Home Premium, 32-bit system. The game installs fine, and it will start well so. The question is when I hit the Start button to start the game. The loading screen appears for a split second, and then the program quits and I get the following error message:

  STOP: Invalid Allocation, 0 bytes
  all ideas can be what is the problem? Thank you

  Chaos37,
  OK, I did some research and found that this can be caused by several different things.  Here will be a list of questions to information that can help us diagnose your problem.  Then, I will list some things to try.

  This game has never run on this PC?
  What are the specifications of your system (brand, model, CPU, RAM, etc...)?
  What kind of mouse you use (wireless, wired, touchpad integrated, etc...)?
  Have you updated any drivers lately?

  Things to try:
  Update your driver to map his and your video card driver.
  If you are able to access the game options, turn off any hardware acceleration for the sound.
  If you use a wireless mouse or you have any type of attached block, then unplug it and test it with a wired mouse.

  Tell us the requested information and the results of these steps.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with my laptop LG KP500 after that PC has agreed for the first time.

  my pc has accepted my lg kp500 mobile so that I could save the photos, but this time, when I insert the USB it won't accept more can help you please thank you

  original title: problem with my cell phone after accepted pc it first time

  If you connect the phone to your PC via USB cable and go...
  Start / my computer... is the phone recognized with a drive letter?

  If_Yes_you may be able to copy and paste the pictures from there to
  a folder on your hard drive.

• Problem with sound and video in AE

  Hello. I am a first time in the program of After Effects user and incurring a problem.

  I was editing a video, and at one point, the sound is completely cut. I have corrected a number of things, including

  Re-import the original video file in the program, and the checking of audio and wavelengths in this layer (i.e. flatlined).

  Can you help me please? Is there something else I can do?

  But is it really strong in the source file? Check in another tool of media player, editing or sound first. People sometimes do stupid things like turn off the microphones in the middle of shooting... Other that it could just be a memory problem where you run out of RAM to decode the audio integer and the waveform preview. Choose the format audio anotehr or split clips in another program might help, especially if your audio is embedded in a compressed format. Æ don't like al particulalrly MP3...

  Mylenium

• Sound and audio devices properties is empty and idle

  I think I have deleted the drivers.  I tried to roll back the previous driver, but there is no driver to restore.  Help, please!

  Go to Windows Update and run update of Custom and install all the updates and then reboot your PC.

  Also, try to run the tool:

  http://support.Microsoft.com/mats/AudioPlayback/

• Windows XP my sound recorder audio device is a DODEC Audio USB, the volume and advanced is grayed, how do he turned the back?

  I just installed a turntable to record albums. I installed everything simply by following the instructions. The volume of the sounds and advanced recorder is grey and everything I do doesn't change it. Can someone help me?

  Hello

  You can view these methods:
  Method 1

  Download & install the previous version of the drivers for the sound card and check if it solves this problem.

  1. type devmgmt.msc in the search box start and press ENTER.

  2. in Device Manager, expand the audio drivers listed in the list of devices.

  3. right click on the audio driver > click Surdesinstaller.

  4 restart the computer and install the downloaded software.

  Method 2
  
  In addition, if you use a recording program, update or reinstall the program registration.

  Method 3:

  Please follow these steps to enable the "Windows Audio" service:

  1. Open the control panel of Windows XP by (depends on your settings in Windows):
     By clicking on "start > settings > Control Panel.
     By clicking on "start > Control Panel.
  2. Open the "Administrative Tools" Panel by (depends on your settings in Windows):
     Double-click the control panel 'administrative tools '.
     Click on "Performance and Maintenance" and then "Administrative Tools".
  3. Go to 'Services' Control Panel by double-clicking it.
  4. Locate the "Windows Audio" service.
  5. Check the "Status" column to see if it is disabled.
  6. If it is disabled, click with the right button on the "Windows Audio" service and choose "Properties".
  7. On the general tab, change it "Startup Type:" drop-down on "manual".
  8. Restart your computer.
  9. Follow steps 1-6 to open the properties of the Audio service 'Windows'.
  10. Click on the 'Start' button to activate the Audio service 'Windows'.
  11. You will now be able to change the control panel 'sounds and Audio devices '.