Re: CD drive disappeared - can't see in "My Computer".

Similar Questions

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• Time Machine replacement drive but can not see the old backups

  Race X Server on 10.11.2 with 5.0.15

  My Time Machine hard disk became full and I replaced it with a new, larger, in the car. I copied everything (using the Finder) from the old to the new drive and set it as the destination of Time Machine for a couple of Mac network.

  I now have a 'new' backup, I don't see one of my old files when entering TM. I can't see my old backups that I copied the disk of TM "Daves Mac.sparsebundle" and alongside a new "Daves Mac 1.sparsebundle.

  How can I continue to use the old backup data?

  Thank you

  "Dave."

  On your Mac TimeMachine backup was severed with the sparsebundle backup on the server - which obviously you saw. If you run this command on one of your Mac you will see something like this (it's just for example).

  $ tmutil destinationinfo

  ====================================================

  Name: TimeMachine

  Type: network

  URL: afp://user@host._afpovertcp._tcp.local./TimeMachine

  Mount point: / Volumes/TimeMachine

  ID: 3167D1F3-9FE8-4369-B8CC-463B92F35438

  The key is that there is an ID associated to backup to the Time Machine backup of service on your OS X Server. This ID is what Time Machine use when working with backups.

  You need to 'reconnect', or 'reassociate', your client computer for backup sparsebundle. The page for command tmutil...

  "Machine directories sparsebundles belong to one computer at a time and are followed by unique identifiers rather than the computer name, host name or address ethernet. The verb inheritbackup reassigns the identity of the specified element, reconfiguring so that the current host, he acknowledges during backups. »

  I found a site for you who has detailed instructions for this. I can't confirm if these procedures work that I have not tested it me then please read the instructions carefully and proceed at your own risk! The author however looks like it includes the concepts involved.

  http://pondini.org/TM/B6.html

  Could bring you to everyone how it happened for you and if the operation is successful, mark it resolved in order to verify that the instructions on the site Internet has worked

• Mac Book Pro can't see the 7 computer from the window on the network

  I have a MAC Book Pro on my network which I am able to see it on my Windows 7 computer and access and send files, but I can't get my Mac to see my Windows 7 computer in all.

  I have set up the sharing in W - 7 and have identified the files to share.
  What Miss me

  Hi mjhar,

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you posted corresponds to Mac computers and would be better suited to the Apple community. Please visit the link below to find a community that will provide the support you want.

  Apple community Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I see if my computer do not have a virus

  Please I want to know how I can check these

  Avira provides free antivirus software for Mac. https://www.Avira.com/en/download/product/Avira-free-antivirus-for-Mac

• can I see when my computer has been accessed from the outside of my house?

  Suspect someone may be using my free wi - fi connection.

  Hi B1lz,

  Change your router password AND the password to the router by default if you think he has been compromised (and you need to change all of your computers that use it as well because otherwise they will not be recognized once you change the settings of the router).  If your router is not configured properly (or if it is, but you feel nervous anyway), this is the solution.

  Rather than trying to find out if this is the case - keep him and KNOW that it is not.

  If you want to check, then for more details (and further explanations as well as many related articles on the sides with additional information which, when combined, will make you an expert), start here: http://www.ehow.com/how_6974931_see-someone-logging-computer-router.html.

  Good luck!

• I installed a second hard drive and unpartittion after, now I can't see even if the computer is recognized.

  After I installed a second hard drive as a slave, he was installed susefully. I formatted but it was partittion. I don't like partittion hd, I unpartition it through computer management and management system and it worked. now, I don't see when I open the computer icon when I check the bios is there when I check through management system is there when I have trouble shooter from there he says works fine, but I can't see through the computer icon it shows not everything, but the second hd.

  How can I put the secondary hd icon in the main icon of the computer?

  Mr. GordonBP

  Thank you very much, it worked. you were right and I learned a lesson more.

  Yes, your answer was very helpful.

• How to configure a SATA hard drive to Manage to see using a disk enclosure?

  1. the motherboard of my computer was dead.

  2. I have buyed a new motherboard and installed it.

  3. prior to reformat, I need to transfer all the information from my HDD on an external hard drive with the help of other computers. For this, I have buyed a disk enclosure.

  4. I put my hard drive in the disk enclosure and connected and the external hard drive to another computer to transfer, but my hard drive and/or the casing of the drive can not see in my computer.

  5. I went to computer technology and it resolved to Manage hard disk configuration.

  6. now, I can see and transfer information.

  7. What do I want?

  I wan to know the process of this technical computer intended for the configuration of my SATA hard drive.

  Hello

  If I understand correctly you want to know how to install the hard disk on the Windows 7 computer.

  I suggest you check out the link below on how to install or remove a hard drive.

  Install or remove a hard drive

  http://Windows.Microsoft.com/en-us/Windows/install-remove-hard-disk-drive#1TC=Windows-7

  Hope this information is useful. Please let us know if you need help with Windows, we will be happy to help you.

• Can't see another computer for file sharing

  Hello
  I have 2 computers in my house, a PC running Windows 7 Home Premium x 64 and the other a XP Home Edition SP3 race, both connected to the Internet through a router TL-MR3420 and the adapter TP-LINK TL-WN822N. I have enabled the sharing of files on both computers and have no problem to display all of the files shared between each computer, so far.
  Whenever I try to view another computer via "Network" or "homegroup" menu on 7 (or my network places on XP), I can't see my other computer which is supposed to be there. So far, I've tried a few attempts to analyze and resolve:
  1 ping each other by IP - success.
  2 ping each other by the name of the computer - has failed.
  3. try to access to "- and " run - failed with error 0 x 80070035 - path not found network. ".
  4 run diagnose step above on Windows 7, she returned with a result: "the device or resource (my static IP XP) is not configured to accept connections on port 'The file sharing and printers (SMB)'."
  5 turn off the firewall on the computers and router.
  6. ensure that necessary services for file sharing are active.
  7. the reactivation of the wireless connection on both computers.
  8 change the name of the Working Group on both computers.
  9. run ipconfig/all on both computers.
  10 install this fix on my XP.
  Ipconfig, it seems my two computers showing the active DHCP on 'no', so I changed my network settings to "obtain an IP automatically" she turns to the 'yes' later. And "NetBIOS over TCP/IP", showing the different statutes on 7 that it is activated on XP it is disabled, even though I put it activated via the WINS tab on the XP network settings. Still do not solve the problem.
  I don't know if it means something, but I share also some folders on my 7 to my Tablet ES File Explorer app, it works as it should (as long as I use static IP address), but if I try to connect my tablet to shared folders on XP, it always shows error message on either:
  WiFi is turned off (it is)
  SMB server is out of reach of the network
  The ip address is not valid
  Blocked by the firewall
  SMB service is disabled
  I guess that Wifi, IP and firewall are not the problem, and I don't know about SMB, it's stands for Samba / file Printer Sharing? He has already checked on computer network settings.
  Any help would be greatly appreciated. Thank you.

  I solved this.

  I opened my XP, run these commands via cmd:
  netsh int ip reset resetlog.txt

  netsh winsock reset
  Restart the computer and then change my connection of cable wireless lan then back to wireless again.

• I can't find my old emails that is to say the last 4 years e-mails have disappeared. I can't see in the 'archives' folder list and also in my list of "local" files

  I can't find my old emails that is to say the last 4 years e-mails have disappeared. I can't see in the 'archives' folder list and also in my list of "local" files
  I recently formatted my system. It causes this problem? Is there anyway to recover my emails?

  Assuming that really format you your hard drive.
  Can erase you every single entry to a file, message, photo, program, document, etc. When you select format you get warnings on this subject.
  The format is the last thing you want to do without going through a backup of your personal and important files.

  Local folders is automatically created when you installed Tbird.
  And it is empty until you move something over there.
  (Your former local folder with all its files and messages has been removed under format).

  Only messages that are still on your server (stbeehive.oracle.com) can be recovered.

• Can't see BIOS UEFI more Windows 8 after formatting hard drive

  After formatting my hard drive, I don't see the opportunity to get into the BIOS/UEFI firmware anymore. It has disappeared from the troubleshooting Windows 8.1. It happened because I had to reinstall Windows because I wanted to put Windows on the SSD drive, that I adapted. Firstly tried to transfer files to Windows from the HARD drive that went successfully but my problem was trying to get the HP BIOS so he can start, he had no option as I saw in the other BIOS, select the name of the SSD drive and turn it on just for 1 St boot, (the SSD has been installed properly so she did state in the BIOS on other things and in the windows to) the only thing that he had in this BIOS is a command to start menu I dragged the SSD to the first boot. Windows restarted and it wouldn't boot from SSD yet, so I put it in legacy mode that came to the top with my SSD info to start first, but when I saved these settings and rebooted Windows it says has no disc or can't find windows. So that's how I got where I am now and had to reinstall Windows to get it working again. Can't find away to get the BIOS/UEFI on windows 8 Troubleshooting menu option more?

  Hello

  The way most simple and easiest way to solve your dilemma to use the HP recovery media to build on the SSD system use the same SATA port that is used by the original Windows 8 boot drive. I know that this procedure works, at least on the PC that I used.

  I'm not a fan of 'cloning' of hard disks to boot HP UEFI active.  There are simply too many problems. Using the HP with a SSD recovery holder sized to accept all the original HP recovery system. This includes not user data. Then use your original hard drive as a device of emergency start and space remaining for the storage of data.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• How can I see external drives on the sierra?

  How can I see external drives in sierra?

  Menu Finder Preferences... > General

• my default calendar on IPhone and IPad has disappeared. I can't see it either on ICloud and do not save on my Mac Book. How can I get it back? Is it possible to return to a previous update in ICloud?

  My default calendar on the IPhone (and IPad) disappeared. I can't see it either on ICloud and make the back not my calendars on my Mac Book. How can I get it back? Is it possible to return to a previous update in ICloud and find?

  Go to iCloud.com using a computer, then settings. When loading this page, look down at left under Advanced and see if you can restore from there.

• I can't see e-mail messages about my local folder on the drive location. Paranoid.

  I am moving pop, IMAP and in the process try to archive many messages in not-very-active topics/folders to my local files. All this seems to work _great_. My messages are archived just where I expect to be, and I can see _in Thunderbird_.

  But, when I go to the location of records them attest to 'Browse' in the account settings for local folders, I can only see .sbd files. These sometimes have subfolders for _some_ subfolders in my local folder structure (but not all). I see no message. In some cases properties indicate that the folder has a size large.

  BUT I want to be able to leave with my e-mail address if something goes wrong. Where are my emails? How can I configure T-bird so that I can be comfortable that they will survive the disappearance of the T-bird, or some other misfortune (assuming I have back up.)

  Thanks in advance.

  Re: try to check many messages in not-very-active topics/folders to my local files.

  So you are not checking them in the sense of using the archive feature. you just create folders in the "Local folders" account and penetrating the files out of the emails Pop e-mail account.

  Please provide the following information.

  First check that you have this set:
  View > folders > all the
  or
  Icon of the menu > folders > all the

  • Then after a picture of the folders pane, so that we can see your "Local folder" and all the files in that account.

  Can make folders and hidden files visible:

  • http://KB.mozillazine.org/Show_hidden_files_and_folders
  • Help > troubleshooting information
  • Click on "view the file.
  • Click the folder "mail".
  • Click on "records the.
  • Post a picture of the Local content folder.

  If you have created files in a folder (subfolders), it creates a file with a .sbd extension.
  Thus, for example, if the Inbox subfolders, then you will see an Inbox.sbd folder.

  • Click the *.sbd folder.
  • Please post image in the folder *.sbd, display the contents of the folder.

  If you have more than one + .sbd file, please post images to display the content.