Mac Book Pro can't see the 7 computer from the window on the network

Similar Questions

• Can't see the network hpsetup on my Macbook Pro on a C4780

  Help - I'm trying to get working wirelessly on a C4780 connected to a new Macbook Pro with 10.6.2.  I am on a network of wireless-G linksys with WPA_PSK and when the HP configuration utility try to connect to my network, it goes into "the network... search. "forever.  So, I tried to connect manually by some of the other posts, but I can't find the network hpsetup even after resetting to the default printer.  The serial number of the printer is CN99SD12ZF.  Is that printers with factory default SSID settings incorrect?  If so, what I try next?

  Some sent C47xx factory printers have an incorrect default setting in their non-volatile memory that prevents the method of ad-hoc configuration.  There is nothing wrong with the printer HW or FW and you should still be able to set up the printer using the Setup program on the CD.

  If necessary, it is a manual method to get the printer on your network.  Here's how to printers wireless C47xx:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  • Press the Scan button to get the wireless settings
  • Select wireless Menu
  • Select wireless settings
  • Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks and then Showall the bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  In the Web page of the printer, click Networking , and then select Wireless (802.11().  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• I have a new mac book pro, I need to copy my stuff from my old mac pro book

  Hi all, I just splashed the money and got myself a new mac book pro, without the DVD player.

  Now I would like to transfer all my stuff from my old book of mac pro, the easiest way and fastest possible.

  while I was in the store to spend my money, the guy told me that I can do by connecting two computers together via Firewire/stroke of lightning and using Time Machine!

  I have an adapter Firewire/Thunderbolt and a Firewire cable :-)

  But I would like to have someone, somewhere to point me in the right direction so that I'm not kidding, I did it this way before, are there details step by step anywhere please, I don't can find any info anywhere else!

  Thanks for looking and if you can help/advise so much better :-)

  Tim

  The 'easier and faster way' is to boot your old MacBook Pro in target disk mode and follow the instructions to move your content to a new Mac - Apple Support.

  Instruction to start in disc Mode target-> share files between two computers with target - Apple Support disk mode

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• Mac book pro unable to 'see' networked HP printer wireless

  A broken HP wireless printer has been replaced by a new HP OfficeJet 6700 (printer, fax, photocopier).  Printer worked very well for my laptop HP (Windows7), but cannot make it work Macbook Pro (all software up-to-date on both machines).  The new printer is set for sharing and the old one (also HP) has worked on both computers.

  I removed the old Mac printer, downloaded and installed the latest driver for Mac OS from HP, but he could not "see" the printer.  The Mac can 'see' the part of the printer's Fax but not the printer.  I installed the printer manually on the Mac by adding the IP address.  The Mac printed successfully on a test page, but when you try to print a document or an e-mail, I get an error message "printer URI is incorrect or no longer exists.

  Ideas and suggestions are greatly appreciated.

  If you use OS X 10.6 or 10.7, download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Can't see the network PC MAC computer, unless I have use RUN in the start menu and type in the IP address.

  Original title: MAC to PC NETWORKING.

  I added my Mac to my PC network workgroup.  I can see the PC from my Mac, but not my Mac to the PC network puts unless I have use RUN in the start menu and type in the IP address. I am running XP Pro SP3.

  Hi markymo777,

  I suggest you to check if you can see the MAC computer with the UNC path - \\computername\sharename. Later, check to see if the problem persists.

  Hope the helps of information.
  Please post back and we do know.

• HDR Pro, can't see the buttons SAVE or quit SMOKING

  Photo files open and merge to HDR pro, but it seems resizes the window and I can't see SAVE or CANCEL buttons down, do FORCE QUIT to exit. I tried to resize the window, zooming, changing the Prefs system display resolutions. I took my old iMAC from 5 months to the Apple store and they think it's CS5. Any ideas?

  Do you mean cmd/opt/esc to force quit?

  No, I meant to leave the dialog in absence or the Cancel button inavailabilty; But if you followed the issue already you probably all of us who are already trying to anyway.

• Can't see the networks without wire in Dell Inspiron

  I have just moved house (previously in the United Kingdom, in Australia) and now I can't get my Dell Inspiron 1525 to find (Vista 31 bits operating system) wireless networks. Under network and sharing Center, if I click on connect to a network or setting up a connection or network, nothing happens. Similarly, under Manage Wireless Networks if I select add nothing happens. However, if I select the Dell Wireless WLAN Card Utility I see my network wireless on the Site tab. Also, I can see and connect to the network wirelessly to other devices (for example the iTouch).

  Hi dellUser_742

  Please refer to the below links and check if the steps to help you resolve the issue.

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  I hope this helps.

• Re-installed Windows XP and now I can't see the network connections and cannot get online.

  Our pc is down a few days ago, so we reinstalled xp.  The xp upgrade.  Now, we show no internet connection and can not get on the net.  Our Device Manager indicates a problem with the drivers being not downloaded on the network adapters.  Also the modem is not recognized when I try to connect. I tried to download the fix for me on microsoft for a flash player and it did not work.  Can you please help me reinstall it?  Thank you

  original title: reinstalling Windows XP

  Go to your computer manufacturer's support web site and search for the Windows XP drivers for your specific model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and install them all, starting with the card mother/chipset drivers, LAN, Audio, USB, SATA, etc, and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Created in Esxi virtual MACHINE can't see the network

  Hello

  I installed Esxi 5.5 and I have no problem to access and create a virtual machine.

  However, the virtual machine, which is 2012 Windows, does not begin with a network adapter.

  When I check the configuration of the VM, the network adapter is connected, turned on, E1000E but says directpath e/s is not supported. I don't have VMware tools installed in the virtual machine.

  I don't understand where the problem lies. I connect to Esxi ok. I can run the virtual machine in Esxi client ok, but the images says that there is no network.

  I created the VM Windows before 2012, outside of Esxi and the network built in card is detected ok.

  STOP PRESS - in computer management Windows, peripheral, the Ethernet controller is not recognized. So, how can I get the virtual machine to recognize when it is running in ESXI?

  Help?

  Thank you

  Jason

  Also can you check with adapter VMXNET or tru uninstalling and reinstalling VMware tools.

  -f10

  http://highoncloud.blogspot.in

  Virtualization VMware on NetApp

• Mac book pro logging out despite the system preferences settings

  If my computer is turned on for more than 20 minutes without me touching the mouse/keyboard, I am prompted with a request to save my work before disconnection.  If I get bored of the command prompt, I get disconnected.  All of this is that despite what is defined in the system preferences.

  In the menu bar, you select

   ▹ System Preferences... ▹ Security & Privacy

  If there is a padlock icon in the lower left corner of the preferences window, click on it and enter your login password when you are prompted.

  Click on the Advanced button and in the leaf that opens, uncheck the box marked

  Log out after... minutes of inactivity

• Can't see the network after 6.5.5 to 8.0 upgrade

  I have a couple of virtual machines that are running at the same time and talk to each other as well as with the host operating system.

  Since the upgrade to 8.0 I can no longer ping or join other machines or the host operating system.  I have not changed the settings since the upgrade.  Two virtual computers have IP addresses static of 192.168.0.123 and 124 respectively.   The gateway is 192.168.0.100.   No machine can ping each other, or the front door.

  Has anyone else seen elsewhere?   I'm completely dead in the water.

  See you soon

  Automatic bypass is not working properly, so select a specific host for VMnet0 NIC in the virtual network Editor.

• Can't see the network of cult film - game is saved.

  When I select 'The Cult Movie Network' and try to stream to my Bravia-3 from TV, I get "Please visit Web of Sony Essentials to associate your device with our service."

  My TV has been recorded for a long time and does not display ' Registration Code: device is registered.

  Catch-22.

  Help!

  Hello Dave,

  Welcome to the community of Sony.

  Please contact Sony support directly for further on troubleshooting this type of problem.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Kind regards

  Charlie

• VMKernel can not see the network...

  I have 4 NICs, 2 NICs service a vswitch with a service console and VMkernel a.   The service IP console works fine but I have no network connectivity for the VMkernel on the same vswitch with a static IP address.  If I set the VMkernel for DHCP, it gets an address of 169.x.  esxcfg-switch - l & esxcfg-NICS - l show no problem.

  Hello

  It seems the two network adapters that you use with that one VLAN configured on the pSwitch.

  • Try to configure vSwitch with a single NETWORK card, which saw Service Console PortGroup and confirm the S.C having connectivity

  • UN-Link the NIC of the vSwitch and add the second NETWORK card and confirm the S.C with connectivity.

  If you have a connectivity on both network adapters, and then in the pSwitch problem seems to be.

  • Troubleshooting above with VMKernel PortGroup and confirm - there is connectivity to the other host via the vmkping command.

  • If doesn't work then be sure to there is a circuit in the pSwitch or not.

  • If you have chutes, make sure the tag pSwitch Port.

  • Put the VLAN ID in the VMKernel PortGroup.

  • Put the VLAN ID in the Service Console PortGroup

  If you are not sure, connect two VMKernel network cards to a crossover cable and try the connectivity tests.

  Best regards

  Hussain Al Sayed

  If you find this information useful, please give points to "correct" or "useful".

• Load the Mac Book Pro

  I am able to charge my Mac Book Pro, in countries outside the United States without having to buy a converter?

  The only card you need would be one that changes only

  "fitness" - just the pins make contact...

  If any travel store or electronics store to have an adapter.

  There are no additional electronics in this type of adapter.

  There are several forms for different regions in Apple Travel Kit:

  • About the Apple - Support Apple world travel adapter Kit

  When traveling, you can use the Apple World Travel Adapter Kit

  to load your Apple products in different countries. This type of

  Kit does contain all the electronics, so it's a passive converter.