Can't see another computer for file sharing

Similar Questions

• Not visible XP computer for file sharing

  I used to have an old netgear router that allowed me to file sharing between computers quite freely, but slowly. so I've updated now, I have much more quick netgear WNR3500 filled with firewalls. However the use of this seems to block the visibility of my etherneted xp machine. which means that when I open the computers folder in network in a new vista machine, it shows everything but the xp machine. I have tried disabling firewalls, routers and disabling the ethernet on the xp machine and using a card wireless instead, but it became not yet visible.the router itself responds to the pings and other computers connected wirelessly are but the xp machine won't. I think it's a problem with one of the multiple firewalls, this computer has collected over the years. could someone tell me please how to clear data from the previous network so that I can start a new one. and the ports to open.

  
  

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• save an image in an image file and reloaded on another computer for the image processing

  Hello

  Can I save the image to an image file and then reload the file on another computer for the image processing? What type of image format should I save for it? Is there any loss of image if I do this? The machine with the camera sits in our lab, and I want to test the software on my own computer image processing. So can someone give some good ideas on this. Thank you

  Jane

  I assume you have the module development VDM and vision acquisition software going TO on your computer.

  So just use playback IMAQ and IMAQ save functions. BMP, png are good for losless save unlike jpg and jpeg2000.

  Hope this helps

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  Original title: Windows 8

  The game, February 6, 2014 21:06:21 + 0000, giebeman wrote:

  If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  Lol just a license, not two.

  In addition, even if you had two licenses, you couldn't do that. You can
  not upgraded from Vista to Windows 8. You can do a cleaning
  installation.

• Hi, back back can check files you opened with "recent files"? With my current setup, I can only see the last 10 files. Can I change the setting to display the last 20 files for example? Thank you

  Hi, back back can check files you opened with "recent files"? With my current setup, I can only see the last 10 files. Can I change the setting to display the last 20 files for example? Thank you

  File management preferences is where you can change the number. I don't know the maximum.

• A computer is visible on the network, but I can't find another computer on the home network.

  Networking troubleshooting maxed out. Need help

  2 running XP Pro Machines on the same network home. At the Working Group under the same name. Check the properties of LAN connection sharing to share. My firewall except for sharing/printer. PING was successful at both. A computer is visible on the network, BUT I can't find another computer on the home network. Any help would be appreciated.

  Hello

  Check if you are able to access the computer.

  (a) press the Windows key + R.

  (b) type the name of the other computer in the open: box in this format:

  \\computer

  (c) press on enter

  You can also try the steps of troubleshooting provided in the link below.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  See also;

  Network map doesn't display your Windows XP computers

  http://TechNet.Microsoft.com/en-us/library/cc754938 (WS.10) .aspx

• How to remotely wake up Vista for file sharing?

  I need help to wake up my Vista PC mode standby for file sharing application. The PC is connected to a router and I can wake him from sleep mode by pressing a key on the keyboard. In addition, I can wake up the PC for the Logitech Media Server application. I have the Logitech Media Server running on this computer. As soon as I turn on the player (carrier or SB3), the PC wakes up fashion 'sleep'. If the "sleep mode" works well for Logitech Media Server.

  Now, I want to make this PC a NAS. So I need to reactivate it for file sharing applications. I have laptop and a Media Player for a Western Digital that need to access the files on the Vista PC. Please advise on how I can wake the PC for this application.

  Thanks in advance.

  Hello

  I suggest you enable wake up LAN in the BIOS and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-wake-on-LAN-capabilities

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I need to use another computer for 1 month.

  I need to use another computer for 1 month, I can install CC with the same account, or I need to uninstall it before the original one?

  Moved to this discussion in the creative forum cloud download & install.

  Andrey Over for more information about how to install applications Adobe Creative included with your subscription please see install and update the apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.  You can install and use the software on two computers.  You can find additional details using Activation & deactivation - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

• Why when I open my email on another computer for example, in Outlook Express or the site of Telstra all my e-mail messages get deleted from the full mail?

  When I opened my email on another computer for example, in Outlook Express or on the Telstra site do all my emails in my inbox deleted completely from complete Mail. This happens with two email addresses different set up on two different computers. I wish that my e-mail messages to stay in complete Mail unless it is deleted from there. Thank you

  Your question is not clear. Is this something that happens, or something you're worried might happen?

  Whatever it is, the answer depends on what you do and how your email clients are set up.

  If you use POP in Outlook Express (really? "It's a very old program!) so he can delete messages from the server. You should be able to leave messages on the server, or you can switch using IMAP.

  Just looking for messages in your Web browser will not erase all messages, but if you delete a message there, again whether or not it is also deleted on any of your computers depends on whether these computers using POP or IMAP.

  I am aware that I have you confused probably further.

  My preference, as I want to be able to work with my email on multiple devices different, is that you use IMAP only, but others can, for various reasons, choose to use pop. There is no good or evil, what suits you best, but in both cases, we must understand a little the operation of the service.

  http://www.MakeUseOf.com/tag/pop-vs-IMAP/

• VCAC 6 can't see vSphere computing resources in my group of fabric

  Hi all

  I hope there, can someone help me. I don't know why I can't see vSphere compute resources in my group of fabric.

  After installation and connection to VCAC successfully, I discovered that there is a default tenant called vsphere.local that I used to create a new store of identity in which I used the Active Directory configuration, the next step was to store information to identify the user for endpoints in this case, my endpoint is only vCenter so I created and configured a new endpoint for a my vCenter. point the address I used was "' https:// IP address/sdk" (I don't know whether to put sdk or not at the end in some blogs say it is necessary to include "sdk", I tried with and without good) then I tried to create a new group of fabric and when I click on 'New tissue group' the guest window doesn't show any computing resource of vSphere. " I found that one possible reason that would prevent me from not see compute resources could be because vmware services do not run on the VACA-IaaS machine that was not my case.

  Are there clues? or if I jumped a step when configuring tenant, of competence and of endpoint, can you please tell me.

  Thank you

  Carlos

  Hello!

  New endpoint must have the same name as the proxy agent (by default - vCenter). If you don't remember, you can check the name in Add/Remove Programs (name of the proxy agent).

  Coordinates of the VC in endpoint - https://FQDN/sdk

  And watch newspapers - Infrastructure - > monitor - > Journal.

• Seagate drive in the BIOS but can't see it in the file manager

  Earlier this week, I installed a Solid State Drive as my boot drive. It works very well. I want to use 2 TB Seagate that came with my Inspiron 3847 as backup devices (slave) and I also want to take 10 Windows out of it. I can see the drive in device (drive 1) Manager and in the BIOS (SATA 2), but I can't see it in the file manager so I can reformat the drive. This particular model (ST2000DM001-1ER64) has no jumpers to set it as a slave drive. Seagate said it is automatic. I am stuck as to how I solve this problem. Any help is appreciated. Thank you!

  Hi ssd user,.

  Happy new year!

  There is no such thing as master or slave with SATA drives. Try to go to disk management, search your drive and check if a drive letter has been attributed to it. I suspect that you must select a drive letter, then it should appear in the file Explorer.

• I can only see an icon for my photos Windows Photo Viewer, but now no picture.

  I can only see an icon for my photos - no picture at all.  This worked well at the time, but not now.  I can always open the pictures individually. What have I changed?

  I can only see an icon for my photos - no picture at all.  This worked well at the time, but not now.  I can always open the pictures individually. What have I changed?

  =========================================
  The following article might be worth a visit:

  Windows 7 - How to enable or disable
  Thumbnails in the Explorer of Windows 7
  http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html
  (Scroll down to: an Option)

• Where can I see my receipts for my payment at Adobe?

  Where can I see my receipts for my payment at Adobe?

  Hi stephaniewiese,

  Please see this:print a received payment or invoice. Cloud Creative

  Kind regards

  Florence