Re: CreativeCloudSet - Up.exe still installs ONLY on the C: drive

Similar Questions

• CreativeCloudSet - Up.exe still installs ONLY on the C: drive

  Well, it is a very old problem! Why didn't this been fixed yet?

  In over 20 years, this is still the first and only application that I've heard of it does not where it should be installed.

  Like many people, my c: is a volume dedicated to system files. Because it's a SSD, space is expensive and limited. I don't want Adobe products on the C: drive as it should be unnecessary use and the waste of costly space.

  Is someone can you please tell me when is expected to get fixed?

  You throw the installer through a loop by duplicating the folder structure. This is probably a bug where the interanlly paths are treated as relative paths and due to the truncation of the trajectory of names it confuses things. Simply call your file D:\Adobe or something equally as simple. Run the creative cloud cleaning tool and try again. And as always: some components are still installed on the root of the system. There is no way around that.

  Mylenium

• Installation of a dual boot for XP on a Vista - XP installation computer forget the SATA drive after restart required #1

  Hello

  I'm trying to set up a dual-boot XPpro on my Vista machine.  I found the instructions detailed at various locations.  I prepared a score of 30G on my SATA drive and booted from my XPpro and XPpro (SP2) retail drives.  The score is quite small because I have only use for some applications.

  I have the following problem and I wonder if anyone can help.  The disk and partition is by my SP2 disc, but it's ok that BONE is not used on any other machine.

  I can choose the new partition as the location for the new installation of XP.

  Installation gets to the point where the first reboot is required, then at startup, I'm stuck on the option 'press any key to boot from the CD-ROM.  I assume that the reader is not detected.  If I try to start from scratch, I get the warning that the new partition already has an operating system on it, but I can reformat and move forward, then arrive at the startup problem re.

  There is no XP drivers for my Board, but I can not install them because they are on CD and the only option to load the specific drivers in the first part of install required has a diskette is in the drive, and of course I don't have a floppy drive.

  I then use the Startup Repair in Vista I can't move to the stage where XP is installed in fact correctly.

  Any help very welcome!

  Paul

  Hello

  I made a disc of slipstream with nLite as suggested, my sata drivers included but still could not circumvent this problem.  Installation kept insisting that they had to come from A:

  Rather than taking the box to bits I read from the link posted by Michael Murphy, once again and found the answer of Taydius on 250/1 posts.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-26-1946.html

  Problem solved by installing EasyBCD in Vista, it points to the new partition with the inaccessible XP and reboot and selection, installation on board as usual.

  Dual boot now works fine.

  Thanks for the help!

  Concerning

• TS4.1 WinXP SP3, IDE slow response * only * if the mapped drive open in teststand... file?

  I have a strange situation here. First of all, I must describe the system:

  • 2 machines both with TS4.1 IDEs installed Win XP SP3,
  
  
  • Machine 1 has logical file of common sequence, which is shared with the two machines via a drive mapped "T": sequence files are in 'T:\Logic '.
  
  
  • Both machines have paths of research with the root t: as the last path in the search list.

  Mounting on machine 1 is fine - seq files can be opened in teststand, sailed around, etc. without any problems.

  However, on machine 2, the IDE behaves normally ONLY if you drag the following files to change or double-click to edit. As soon as you open a movie file using the open a TestStand sequence file dialog box, click anywhere on the IDE creates a large volume of network traffic and the IDE "hangs" for a few seconds (I've seen as long as 5) and is completely insensitive (there is a direct correlation between the 'pic' termination of network traffic and the TS IDE becomes sensitive).

  I did a netstat - ano queries and I don't see new ports opened upwards, so all this is paid by the regular windows file sharing link. If I open directly from the w: drive, it is also the...

  -This problem is not continuous: he has been fine for several weeks and came back yesterday. I was lucky enough to find the "do not open any files from within teststand" workaround and continue working normally.

  If you have opened a file in the application, then you exit TS and restart it and all is well again.

  Any ideas? It is UNBELIEVABLY BORING.

  This is probably the problem. Subdirs, especially on a network drive to the research should generally be avoided.

  I would recommend against using the options "search subdirectories", even in the case not connected to the network, since then, not only can it lead to performance problems, it can make unintentionally using the incorrect module because the module where you want to say, if you come to specify the name of the file and rely on the recursive search could be ambiguous and have several possible matches. It is best to use a fixed search with a partial if possible relative path directory. For example, if your search directory is c:\mc-tas and you want to refer to a module in GIP\LLB, you can simply specify GIP\LLB\Mymodule.llb for the path in your steps and you would then not need to c:\mc-tas a recursively searched subdir.

  Hope this helps,

  -Doug

• A new XP installation will wipe the hard drive first? (currently linex os)

  Little girl had PC at College «friend installed Linex.» I now PC New Testament new XP install first remove the hard drive? (desired)

  Yes.

  Do you need help to make the installation and the subsequent update?  What type of installation media?

• What is the current size of the download for Firefox package? I have a dial-up connection and clicking on the "latest version" link s look as you get an exe file which only manages the installation, so there must be more.

  The download starts with Firefox Setup 6.0.2.exe, but I still struggle with "setup" programs that seem to be of reasonable size (it is estimated that 45 minutes to download), but once launched, starts a download of ten hours.

  This should be easily accessible information about the site... What is the size of total download if the current Firefox installation package?

  Yes, nothing else is necessary.

• Applications Windows XP Startup - Bug: the .exe file name only, not the full path

  Using Windows XP, run-msconfig-startup online online, only the name of the Executive file of the Applications that load and boot at startup are shown - this name sometimes not easily indicates he belongs as to which Application.
  Therefore, it becomes difficult to decide to uncheck (stop autoloading at startup) or not - unless the full path to its location is revealed. But this small window no poster not the full path - even if the mouse pointer is hovered over an entry in the list of applications.
  Third-party software (AnVir Task Manager Free) displayed the full path when the mouse pointer is moved to an entry.
  Microsoft should take the queue and improve this Service / installation / functionality, please.

  On my Windows XP, there is a 'Command' column / window for the start of the tab that displays the full path to the file.  If this column is not wide enough to show the entire path, place your cursor on the line that separates the column header in order for the column heading 'Image '.  The cursor turns into a line with arrows pointing to the left and right upright.  Click and hold the mouse button down and drag to the right.  The column will expand and a horizontal lift will open down to scroll all right.

  If this does not satisfy your needs, try the more technical version of msconfig Microsoft-"Autoruns".
  Autoruns:< http: technet.microsoft.com/en-us/sysinternals/bb963902="">
  HTH,
  -JW

• only downloaded the new driver still no sound

  I don't even have driver of system sounds, downloaded and updated, still no sound

  Hello

  1. What is the brand and model of the computer?

  2 has there been any changes made on the computer before the show?

  See the article and check if that helps:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• After installation cannot find the printer driver on my mac

  I downloaded hpprinterdriver3.1.dmg from the site web from apple and installed.  Installation was successful.

  However I can't find the driver on my computer.

  Is there something wrong?

  Thank you

  Owen

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

• Installation and upgrade the hard drive

  
  
  

• HP Envy 15t: 8.1 Windows Installer Clean in the hard drive model GPT without losing the RECOVERY partition

  Always I try to format my windows partition, I get the following error:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  So I'd like a clean install of Windows 8.1 without changing the style of hard drive or in bulk my RECOVERY partition.

  OBS.: I just can I perform boot after you disable UEFI and Secure Boot.

  @lucasc ,

  Hello and thanks for the display on the HP support forums.  You will not be able to do it without damaging the recovery partition.  If you want to do a fresh install on your system, use the system recovery.

  If this isn't the case, you will install the operating system of your choice.  So before you send that the laptop came with the operating system, and you supported drivers for the operating system you want to install.

  If this isn't the case, you will not be able to find in driver support and you end up with hardware problems.  The drivers are built for laptop based on the OS that it was released with and they are owners.

  I hope this helps.  Thanks again for posting and have a great day.

• MPMiniSigStub.exe has just appeared in the E: drive - do not know how or why

  Hello

  I just noticed a new folder in my E: drive I don't create, called 14442a029a6ced39ab27dda8ac.  In this folder is an application called MPMiniSigStub.

  I had a glance around this forum and others on the web, and I understand that it is something to do with the Microsoft security updates, etc.  Most of the places mentioned that she has to do with Microsoft Security Essentials.  However, I have not installed (I use Avast 5.0).

  My laptop is Vista 32 bit SP2.  I use Windows Defender and Windows Firewall.  I also Avast Anti-virus duration and Prevx 3.0 (limited, free version).

  I would like to know if there is any reason to worry about this new folder, and demand would it not wise or foolish to delete?

  I would like to know if there is any reason to worry about this new folder, and demand would it not wise or foolish to delete?

  It may be a virus masquerading as the real program, but on the other hand, it might not. There will be NO problems if remove you it.

• Can I use my secondary drive with operating system installed only on the primary drive?

  I want to install simulator FSX on my secondary drive, I heard that it will pick up the pace. I install Win 7 on my secondary drive in order to make it work?

  Primary-Seagate Barracuda 1 TB Win7

  Secondary-WD VelociRaptor 10000 RPM

  Thank you

  Noobie

  I run my sim card on a Sharp 70 "Led 1920 X 1080 p, its so rude, but I like it. I recently got the GTX 590 to find FSX hate double GPUs.Another lesson learned the bad sense, lol. (soon gtx 680)  Also I saw FSX does not play well with the RAID. The sim card is dependent on almost all CPU but with mem cpu and mobo upgrades I should;(better!) See a significant difference. I see a drop in FPS on such a large screen, are there tips to improve?

  Thanks a lot for your answer.

  (24 gb 1866 mhz mem, Asus p6t7 Mobo, intel i7 975 happen soon.)

  Oh yes, I am running an i7 - 2600 K on an Asus P8Z68-V mainboard with memory 32 GB GSkill, Yes, I use a lot of memory, but my performance is excellent, no bottle no necks here. I read that my favors 1600 MHz cpu, with a card mother dual channel is to have triple or quadruple channel about the latency of memory and cache. I think you should run an i7 - 2600 k or even an i7 - 3770 k and at least a card mother with a Z68 or better (Z77) chipset, I also think that FSX could benefit from the technology of fast storage Intels. In addition, I think you should consider at least a 32nm, otherwise a 22nm CPU. Sandy Bridge or Ivy Bridge CPU are pretty hard to beat. I use my system for games, photo editing and a few VMs running via VMware 8.0 and I'm quite satisfied with the overall performace, with 32 GB of memory, I'm not even under a swap file. In any case, you need to re - consider your choice of material. I have always a way to upgrade with my CPU, hard drives and the GPU.

• Re-installation after reformatting the HARD drive

  Due to the infection by the Virus, I uninstalled my copy of Acrobat X Pro. After reformatting the HARD drive, I downloaded and re-installed the latest version of Acrobat Pro 10. When installing, I get the license number and it is accepted as correct. However, when I run the program it invites me to re-enter the license and then, States that no matching program is installed on my computer. Please help.

  Hi, Alvaro, we checked the details around the serial number you mentioned, Acrobat version 8 volume license serial number.

  Please Contact Customer Care to get this fixed number.

  Atul_Saini

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.