Re: Ethernet Port work is not on the P077TX Pavilion

Similar Questions

• Thunderbolt port works is not on the MacBook Pro 15 "mid-2015 retina

  First of all, my specs: mid-2015 MB Pro retina 15 "(11.5), i7 at 2.5 GHz, 16 GB RAM, 512 GB HD, Iris Intel & AMD Radeon R9 M370X graphics"

  A week ago, I noticed that the thunderbolt the closest port to the MagSafe port does not work, but the other port thunderbolt works as it should with all devices I'm trying. I already tried a SMC and PRAM reset without success and there is no update available software. I bought the new Apple computer in September, so I should be still under warranty. Any thoughts?

  Thank you!

  Chris M

  I noticed that the thunderbolt the closest port to the MagSafe port does not work

  How did you determine that?

• Recovery and system recovery disks don't work is not on the MS213 Pavilion (All in One)

  Hello

  I ordered the HP recovery discs as F11 will not work. I got 4 disks with one separated from the others. He said "use this first! The other 3 were combined, and they are marked the system recovery and disc 1 of 3, 2, 3 and so on. I restart the computer with the disk that says use this first. The disc starts to load and says loading files of Windows, or somehting like that. Then he said: Windows startup. I don't get the Recovery Manager menu. After a few seconds it ejects the disc, and there are 3 pictures on the screen, at the top left is like a circle with a check mark in it. With an arrow, it points to an ejected drive of a computer image on the disc tray. And it points to a picture of a computer with 3 drives. It seems that he tells me to put in the next disc. I put in one that is graduated from 1 to 3, the light on the drive flashes, and then nothing happens, regardless how long wait. If, instead of starting with the disk that says this first use, I start with the one who said that 1 of 3, after loading Windows files, it says something like "this disc is not for this computer.

  System information:

  HP Pavilion MS213 all-in-one

  Windows 7 64 bit

  Configuration of stock

  Background:

  It is a friend's computer. She was making a mistake "code purple" with the resumption of F11. She had someone watching and I don't know what they were doing, but when I got it, I was getting an error at startup. somehting like cannot find the Boot...

  I found a commercial version of Win 7 64 bit standalone disc and installed on the machine. It runs great, but it had to be for troubleshooting only, until I have the recovery disks.

  So, I'm stuck and would appreciate any help. I thought initially upgraded to Windows 8, but I thought that the recovery disks will be cheaper, and also the friend doesn't have to go through the inclination of windows 8.

  I will be happy to provide more information if necessary.

  If you can read the license key Microsoft Windows 7 of 25 characters related to the machine, you can download a Windows 7 ISO file to burn to a DVD. Remember, it is the version that is listed on the Microsoft COA sticker.

• microphones not working only not on the dv6751us Pavilion

  After a clean install of Windows 7 Professional (previously had Vista) on my Pavilion dv6751us, the built-in microphones do not work anymore.  I checked Device Manager and no microphone does appear in the list.  Connect an external mike on the plug works fine and I can play music etc, so the sound card seems in good condition.  Any help is appreciated.

  You are the very welcome, Fred.

  Try the new driver Vista support for your laptop and driver, page and see if it works.

  Paul

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• Search works is not in the people app

  When I search in the people App, I have 'no result '.  I tried to uninstall and reinstall the suite app people.  Is there any solution for this?  I should be able to search a person's name.

  Hi Jim,.

  Welcome to the Microsoft community where you can find all the answers related to Windows.
  
  According to the description, you are having problems with the search function doesn't work is not in the people App.
  Proceed as from the link below and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
   
  Answer to us if you are having problems with the people App or any other issue of Windows, and we would be happy to help you.
   
   
  Good day!
   
  Hope this information helps.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Ethernet doesn't work is not on the new laptop of Win8.

  Just bought a new laptop to run a FullSpectrum LAser cutting machine. I was running the laser with my 4gig RAM Dell Latitude E5400. It worked perfectly. Connected to the internet with my rounter wireless home and connected to the laser with short Ethernet cable. I needed one more big computer RAM won the Dell Inspiron 15 of WIn8. Redownloaded the pilot controller/Laser but the computer cannot connect to the laser. When I ping IP laser, the laptop can not see. In the section networking and sharing/change the adapter settings, ther is a big red X next to the Ethernet icon. Help, please!

  Hi Ruth. Thanks for the help. I had the problem solved. In this case, if I disable the Wifi connection to the Internet, my computer connects to my laser properly cutting machine via the Ethernet port perfectly. I can then turn on wifi and the laser and the internet connection are functioning properly. Thanks again for the help online

  Gerry

• HP Laserjet 4200 works do not since the installation of wireless N300 router

  I set up a new computer with Windows 7 and connected to the existing router.  There was a HP LaserJet 4200 connected to the router as well.  This configuration worked.  I installed a new wireless router Netgear N300 connecting the computer and the printer to the router with a Cat5 cable.  I manage not to print (or ping) the HP LJ4200.

  I am able to get out to the internet through the router with cables Cat5 on 3 computers and wireless on 1 computer to the router works.

  Any ideas on what I'm doing wrong with the configuration of the printer?

  I set up a new computer with Windows 7 and connected to the existing router.  There was a HP LaserJet 4200 connected to the router as well.  This configuration worked.  I installed a new wireless router Netgear N300 connecting the computer and the printer to the router with a Cat5 cable.  I manage not to print (or ping) the HP LJ4200.

  I am able to get out to the internet through the router with cables Cat5 on 3 computers and wireless on 1 computer to the router works.

  Any ideas on what I'm doing wrong with the configuration of the printer?

  It's probably a mixup between the IP address or subnet assigned by your previous router and the new router.  Print a network configuration of controls on the front panel of the printer page to see how it is implemented.

  1. Press (select) to open the menus.
  2. Use (up arrow) or (down arrow) to scroll to INFORMATION and press on (select).
  3. Use (up arrow) or (down arrow) to access the PRINT SETUP, and then press on (select).

  Now take a look at the network configuration of your computers.

  Start > cmd (run as admin) > OK
  ipconfig/all {Enter}

  Your printer's IP address must be in the same subnet as your computer.  For most routers, this means that the first 3 octets must be identical.  The Netgear N300 use 192.168.1.xxx, so your printer's IP address MUST be 192.168.1.x, where x cannot be 1 (the address of the router itself) or a number assigned to a computer.  If you have the printer set to "obtain an IP address automatically", the router will choose an appropriate IP address.

  However, printers are often configured to use static IP addresses.  Even if it is better, if your printer has been configured to use a static IP address with the previous configuration of your network, it may not be compatible with your current network.

  You should also check to see what looking for computers.  My box of Windows 7 is not available at the moment, but I think that the procedure is similar to XP:

  Open Printers and faxes and right click on the printer in the network.  Select Properties.  Click the Ports tab.  The port of the printer should already be highlighted, click on Configure Port.  Look in the box "printer name or IP address."  If it shows an actual IP address, this means that the printer will only search the printer at this address.

  If the address has changed (see above), the computer will not find the printer.  If there is a 'printer name' in the box, the computer "should" find the printer... but maybe not able to do so for a variety of misconfiguration.  This is why it is best to use static IP addresses for printers... but be careful that the printer is set to an IP address that is appropriate for your network, and that the computer knows that he has to use this address to find the printer.

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• RA VPN doesn't work is not on the second external interface

  I've temporarily came from two Internet service providers in our ASA 5510.  Which works very well.  I tried to configure the VPN to our second outside interface (outside-XO) and who does not.  The first/original VPN works great.  Can someone look at the config and tell me if I did something wrong.  It is not a customer number, because it is able to connect fine on the first interface.  Thank you.

  ASA Version 7.1 (2)
  !
  hostname FW01
  dot.com domain name
  activate the password * encrypted
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP address *.229.200 255.255.255.192
  !
  interface Ethernet0/1
  Speed 100
  full duplex
  nameif inside
  security-level 100
  IP 192.168.2.3 address 255.255.255.0
  !
  interface Ethernet0/2
  nameif outside-XO
  security-level 0
  IP address *.157.100 255.255.255.192
  !
  interface Management0/0
  nameif management
  security-level 100
  IP 192.168.14.254 255.255.255.0
  management only
  !
  passwd * encrypted
  banner login attention is a private network. Unauthorized intruders will BE prosecuted to the extent of the ACT!
  boot system Disk0: / asa712 - k8.bin
  passive FTP mode
  clock timezone PST - 8
  clock summer-time recurring PDT 2 Sun Mar 2:00 1 Sun Nov 02:00
  DNS server-group DefaultDNS
  dot.com domain name
  permit same-security-traffic intra-interface
  object-group service tcp Server
  HTTPS and www description
  EQ object of the https port
  port-object eq www
  object-group service tcp Mail
  SMTP POP3 access description
  EQ Port pop3 object
  EQ smtp port object
  port-object eq 32000
  non-standard tcp service object-group
  Port Description 1429 and 1431
  port-object eq 1431
  port-object eq 1429
  object-group service DNS tcp - udp
  Description to allow outside DNS resolution
  area of port-object eq
  object-group service FTP tcp
  FTP description
  port-object eq ftp
  SMTPMail tcp service object-group
  Description SMTP only access
  EQ smtp port object
  IQWebServer tcp service object-group
  Www and port 8082 description access
  port-object eq www
  EQ object Port 8082
  EQ object of the https port
  port-object eq 8999
  SFTP tcp service object-group
  Description SFTP_SSH
  EQ port ssh object
  outside_access_in list extended access permit tcp any host *. *.229.201 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.229.202 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.229.203 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.204 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.205 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.208 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.101 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.157.102 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.157.103 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.104 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.105 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.108 - a group of Web server objects
  access-list 150 extended permit tcp any any eq smtp
  access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 10.1.1.0 255.255.255.0
  access-list sheep extended permits all ip 10.1.1.0 255.255.255.240
  Splt_tnl list standard access allowed 192.168.0.0 255.255.0.0
  Splt_tnl list standard access allowed 10.1.1.0 255.255.255.0
  access-list extended webcap permit tcp any host *. * eq.164.210 smtp
  access-list extended webcap permit tcp host * smtp eq.164.210 all
  pager lines 24
  Enable logging
  logging asdm-buffer-size 200
  buffered logging critical
  exploitation forest asdm errors
  Outside 1500 MTU
  Within 1500 MTU
  management of MTU 1500
  outside-XO MTU 1500
  mask 10.1.1.1 - 10.1.1.15 255.255.255.0 IP local pool VPNpool
  mask 192.168.14.244 - 192.168.14.253 255.255.255.0 IP local pool VPNCisco
  ICMP allow any inside
  ASDM image disk0: / asdm512.bin
  enable ASDM history
  ARP timeout 14400
  Global (outside) 1 *. *.229.194
  Global (outside-XO) 1 *. *. 157.66
  NAT (inside) 0 access-list sheep
  NAT (inside) 1 192.168.0.0 255.255.0.0
  public static tcp (indoor, outdoor) * domaine.229.202 192.168.14.166 netmask 255.255.255.255 area
  public static tcp (indoor, outdoor) *.229.202 www 192.168.14.2 www netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  public static tcp (indoor, outdoor) *.229.202 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.6.229.203 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.28.229.204 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.205.229.205 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.29.229.208 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.3.229.201 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. * domaine.157.102 192.168.14.166 netmask 255.255.255.255 area
  TCP static (inside, outside-XO) *. *.157.102 www 192.168.14.2 www netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  TCP static (inside, outside-XO) *. *.157.102 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.3.157.101 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.6.157.103 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.28.157.104 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.205.157.105 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.29.157.108 netmask 255.255.255.255
  Access-group outside_access_in in interface outside
  Access-group outside_access_in in interface outside-XO
  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route inside 192.168.0.0 255.255.0.0 192.168.2.1 1
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  attributes of Group Policy DfltGrpPolicy
  No banner
  WINS server no
  DNS server no
  DHCP-network-scope no
  VPN-access-hour no
  VPN - connections 3
  VPN-idle-timeout 480
  VPN-session-timeout no
  VPN-filter no
  Protocol-tunnel-VPN IPSec
  disable the password-storage
  disable the IP-comp
  Re-xauth disable
  Group-lock no
  disable the PFS
  IPSec-udp disable
  IPSec-udp-port 10000
  Split-tunnel-policy tunnelall
  Split-tunnel-network-list no
  by default no
  Split-dns no
  disable secure authentication unit
  disable authentication of the user
  user-authentication-idle-timeout 30
  disable the IP-phone-bypass
  disable the leap-bypass
  disable the NEM
  Dungeon-client-config backup servers
  the firewall client no
  rule of access-client-none
  WebVPN
  url-entry functions
  HTML-content-filter none
  Home page no
  4 Keep-alive-ignore
  gzip http-comp
  no filter
  list of URLS no
  value of customization DfltCustomization
  port - forward, no
  port-forward-name value access to applications
  SSO-Server no
  value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
  SVC no
  SVC Dungeon-Installer installed
  SVC keepalive no
  generate a new key SVC time no
  method to generate a new key of SVC no
  client of dpd-interval SVC no
  dpd-interval SVC bridge no
  deflate compression of SVC
  Cisco strategy of Group internal
  Cisco group policy attributes
  value of server WINS 192.168.14.4 192.168.14.11
  value of 192.168.14.4 DNS server 192.168.14.11
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Splt_tnl
  field default value *.com
  username * password * encrypted
  username * password * encrypted privilege 0
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted privilege 15
  username * password * encrypted privilege 15
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 outdoors
  http 192.168.0.0 255.255.0.0 inside
  http 192.168.1.0 255.255.255.0 management
  http 192.168.14.0 255.255.255.0 management
  http 0.0.0.0 0.0.0.0 outside-XO
  SNMP-server host within the public 192.168.14.27 of the community
  location of the SNMP server *.
  contact SNMP Network Admin Server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
  dynamic-map of crypto-XO_dyn_map 10 outside the value transform-set ESP-3DES-SHA
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  outside-XO_map 65535 ipsec-isakmp crypto map outside Dynamics-XO_dyn_map
  card crypto outside-XO_map interface outside-XO
  ISAKMP allows outside
  ISAKMP enable outside-XO
  part of pre authentication ISAKMP policy 10
  ISAKMP policy 10 3des encryption
  ISAKMP policy 10 sha hash
  10 2 ISAKMP policy group
  ISAKMP life duration strategy 10 86400
  ISAKMP nat-traversal 20
  IPSec-attributes tunnel-group DefaultL2LGroup
  ISAKMP keepalive retry threshold 600 10
  IPSec-attributes tunnel-group DefaultRAGroup
  ISAKMP keepalive retry threshold 600 10
  tunnel-group, type Cisco ipsec-ra
  attributes global-tunnel-group Cisco
  address pool VPNpool
  Group Policy - by default-Cisco
  tunnel-group Cisco ipsec-attributes
  pre-shared-key *.
  ISAKMP keepalive retry threshold 600 10
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet 192.168.14.109 255.255.255.255 inside
  Telnet 192.168.14.36 255.255.255.255 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 10
  management-access inside
  dhcpd lease 3600
  dhcpd ping_timeout 50
  !
  INSPECT class-map
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  Policy-map global_policy
  class INSPECT
  inspect the dns
  inspect the http
  inspect the icmp
  inspect the tftp
  inspect the ftp
  inspect the h323 ras
  inspect h323 h225
  inspect the snmp
  inspect the sip
  inspect esmtp
  class inspection_default
  inspect the ftp
  !
  global service-policy global_policy
  TFTP server inside 192.168.14.21 TFTP-root /.
  192.168.14.2 SMTP server
  Cryptochecksum:5eedeb06395378ed1c308a70d253c1b6
  : end

  Hello

  Should work.

  What I think is the routes:

  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65

  If the first interface is ok, the ASA does not go to route packets via the second interface, so VPN will be not through this interface.

  On the client, can you PING the two IPs outside of ASA or only the first?

  Try to add a static route on the SAA to secondary education outside interface pointing to the address of the customer and try to connect via VPN and see if it works.

  Orders:

  HS cry isa his

  HS cry ips its

  Will be a big help as well, when the VPN connection attempt failed.

  Federico.