Re: help to recreate the model and tie it to site

Similar Questions

• Where the model and view in BPM ADF UI

  Hello
  
  I need to find the model and the view of the project of the ADF. It may seem silly, but I create ADF UI by human task BPM "Form Wizard". In this case, I'm not able to determine which section is my role model and that is my controller.
  
  Could someone help me with my problem.
  
  Kind regards...

  A perfect answer is here for reference - model and discovers in BPM 11 g ADF project
  Please mark this thread as closed.

• Determine the MAC address of the LAN knowing that the model and serial number

  Laptop Toshiba SN 96592614 G

  Is it possible to determine the MAC address of the network card, knowing that the model and the serial number of your laptop?

  How to enter the Toshiba addicts.

  I saw you using Toshiba unit details page with the serial posted Qosmio F30-113 offered in Russia.

  Your laptop is stolen or what?

• HP laptop: find the model and serial number

  I'm trying to place the model and the serial number I can order some new keys as the letters are worn.  I looked everywhere in the machine, including removing the battery. Doesn't seem to give enough information, according to the order made multiple provider page parts and I need to know what type of shock absorber rubber is key to know what type I have, that involves to burst off the coast of keys and in the past that broke the existing key and makes them unusable.

  Hello

  Here are a few options.

  1. hold down fn and Press esc - this should display model No. / Nr but will work only if the HP System event utility is always installed.

  2 close the laptop by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot. Tap away at the esc you key start Notepad to open the Start Menu.  Select the Menu of the Bios ( f10 ).  Both the model and Nr number must appear on the first tab.

  Kind regards

  DP - K

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• Re-installed HP Support Assistant, now doesn't show the model and S/N. A permissions problem?

  After you have reinstalled HP Support Assistant, I now show "loading"at the bottom of the screen HP Support Assistant, where would be the model and S/N. ".  They appeared properly before, but not on the re - install.  I deleted a file by accident, to be or there is a problem with Windows 7 permissions.  What is the reference for this?  I checked and numbers are available at the command prompt, so that they are in the system.

  Download and install the latest version of support assistant from this page.

  http://h18021.www1.HP.com/helpandsupport/HpSA.html

  .

• What is the difference between the model and its clone in VMware?

  What is the difference between the model and its clone in VMware?

  Clone

  A clone is a copy of the virtual machine.

  You can't convert back the cloned Virtual Machine.

  A Clone of a Virtual Machine can be created when the Virtual Machine is running

  Cloning can be done in two ways: Clone full and linked Clone.

  A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation. Continuous operation of a full clone is entirely separate from the parent virtual machine.

  A linked clone is a copy of a virtual machine that shares virtual disks with the virtual machine of parent on a regular basis. This preserves disk space and allows multiple virtual machines to use the same software installation.

  Cloning of a virtual machine can save time if you are deploying several similar virtual machines. You can create, configure, install the software on a single VM and then clone several times, rather than the creation and configuration of each virtual machine individually.

  Model

  A model is an original copy or a reference image of a virtual machine that can be used to create many clones.

  Models can be turned on or edited and are harder to change than usual of virtual machine.

  You can convert the model to the Virtual Machine update model base with the latest released patches and updates and to install or upgrade any software and still convert to template to use for the future deployment of Virtual Machines with the latest patches.

  Convert virtual machine model cannot be performed, when the virtual machine is running.  Only the Clone to the model can be performed when the Virtual Machine is running.

  A model offers a safer way to preserve a virtual machine configuration that you want to deploy several times.

  When you clone a virtual machine or deploy a virtual machine from a template, the cloned virtual machine resulting is independent of the virtual machine or the original model.

• Help - profile change Service models and policies without changing the existing MAC or WWN vNIC and vHBAs

  Hello

  I would like to know if there is a way to preserve existing vNIC MACs and WWN vHBA if I change the model of a Service profile?

  To clarify, our Service profiles have been created since an initial model, and now we'd like as these Service profiles to point to a - model - update to simplify management.

  Initial-template originally provided manually created vNIC and vHBAs and used no LAN or SAN connectivity political, but the new updated model made.

  VNIC names and vHBA names, as well as the MAC and WWN used in connectivity pools policies update-model are the same as those currently used by the Service profiles.

  To rephrase the question:
  Is it possible to change initial-model a Service profile to a template update with essentially the same everything, without changing the UUID currently in use MACs of the profile Service, WWN and perhaps?
  If the answer is that they are not the same when this happens, then someone know of any workaround?

  Thanks for your help!

  RR

  Hi RR

  With respect to the Central of the UCS and sequential allocation:

  https://supportforums.Cisco.com/discussion/12006286/UCS-Central-sequenti...

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/release/notes...
  New features in version 1.1(2a)
   
  Allocation of ID sequential for pools, such as addresses MAC, WWN, IP and UUID

  The procedure I would use:

  -Create the update model

  -remove the link 1. Initial model EP

  -delete this 1. SP (this helps to release all the values in the pool)

  -create new MS to model update (it will inherit above pool values)

  -Repeat for all AOCS

  I did this several times without problem (for example, no need to change the zoning of FC). Of course it is disruptive, by blade and SP.

  Don't know if this unbind / bind procedure works without reserves.

  See you soon

  Walter.

• Help on the model and aggregation

  Hi Experts,
  
  I use models to calculate the value of Member individuals (at the leaf level) of a size. The expression is like that
  A = B - C where: A is at the leaf level and B and C are at the second level from the top. The values are precalculated for thisdimension so B and C are available after the charge itself. After running the model value happens correctly for A. The cube is precalculated for all dimensions. All dimensions are had set to base hierarchies except time.
  
  Now, I want to consolidate this value to all the ancestors of A and for this reason I am running after an order:-
  
  -> aggregation PRTTOPVAR using < default aggmap >
  
  When I do this, data calculated for A also disappears and shows 0.
  
  My questions are:-
  
  1. what should I do to aggregate the data calculated at the level of all?
  2. why I m losing any data that is calculated after the execution of the aggmap default?
  3. as A, B and C belongs to the same dimension, I don't use other dimensions in the type clause of the dimension. Is this good? If Yes, then how the values will be calculated for a different combination of dimensions?
  
  Any help would be much appreciated.
  
  DB: 10.2.0.4
  MN: 10.2.0.3A
  OLAP applied patch.
  
  Thank you
  Brijesh
  
  Published by: BGaur on October 10, 2008 20:29

  Yes you are right; without naskip2 the value 'Yes' all NA value in your calc will return NA as the result, even if other cells of the aggregation containing no data.

• I could not find my model of laptop. I need help to download the utilities and drivers windows 7

  My laptop

  Name of product: notebook PC HP Pavilion g6

  Product number: B1N54EA #ABV

  Can someone please tell me my notebooks model number or a link to the page to download the drivers for my laptop?

  Hello

  The model of your laptop is (you can see B1N54EA is the number of the product):

  http://support.HP.com/us-en/document/c03263476

  and drivers page:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5251336

  Kind regards.

• Need help to recreate this model of arrow

  Hello

  I need essentially to recreate the profile of arrow shown in the banner below zigzag.  I'm not an expert in photoshop and have spent the last two hours of messing around with it and by using Google, but could not create a similar size of the arrowhead.  I don't know exactly how correct the size of the arrow head and width separately.  I used the online tool and created this way arrowhead.  Then I would try and adjust the width, height and weight on the top of the paved, but was unable to get a ratio similar to that below.  The body of the arrow was too thin, or when I tried to thicken, it caused great become arrowhead.  Also, if you could help explain how to recreate the other lines throughout the banner that would be great.  A friend has created this banner below for me, but I need to change the color of the arrow and the text.

  Can someone help me with this please?  Thanks in advance!

  

  I repeat what has already been said, the best option for you is to recreate probably just head of arrow as a distinct form. Because the shape is very simple, it is a quick and easy solution

  Here's an illustration of what above mentioned Charles quick:

  1. Select the Polygon tool (if you can not see, click and hold the Rectangle tool to access the context menu)
  2. Change the number of side 3
  3. Select your fill color
  4. Then click and drag to create your form

  

  In addition, a note - if you have access, Illustrator is probably a tool best suited to the creation of this chart type. It allows you to refine the lines and heads of arrow for one more great extent then Photoshop.

  See you soon!

  Kendall

• Need to recreate the model files

  Hello

  I begin barely using Dreamweaver 8 and began to edit this site from a previous developer. A little knowledge of web design. Finally, I understood how the navigation menu bar / can be inserted into the template .dwt files.

  However, the previous developer provided no model files (the entire folder is missing). I didn't know that the Web site could keep functioning without these .dwt files. I guess the code gets somehow spread to all these sections greyed out in the php files.

  But now I need to make some changes in the navigation bar. Currently, the only option for me seems to be to edit each file is grayed out in section outside of dreamweaver. Guess I can also toggle the codeOutsideHTMLIsLocked parameter to create an editable (?) section, but it would be better if I have recreated models and work from there.

  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="../Templates/Admin.dwt.php" codeOutsideHTMLIsLocked="false" -->
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
  <!-- InstanceBeginEditable name="doctitle" -->
  <title>RSM: Realwork Management System</title>
  <!-- InstanceEndEditable -->
  <!-- InstanceBeginEditable name="head" -->
  <!-- InstanceEndEditable -->
  <link href="../style.css" rel="stylesheet" type="text/css" />
  <link href="../rsm.css" rel="stylesheet" type="text/css" />
  </head>
  <body>
  <table width="900" border="0" cellspacing="0" cellpadding="0">
    <tr>
      <td><img name="" src="" width="150" height="0" alt="" /></td>
      <td><img name="" src="" width="750" height="0" alt="" /></td>
    </tr>
    <tr>
      <td colspan="2"><img src="../header_background.jpg" alt="Header" width="900" height="91" /></td>
    </tr>
    <tr>
      <td> </td>
      <td> </td>
    </tr>
    <tr>
      <td width="150" valign="top">
   <div id="navBar">
   <div id="navBarLinks">
   <h3>Main Menu</h3>
   <ul>
   <li><a href="manage_workers.php">Manage Workers</a></li>
  <?php
   if ($_SESSION['is_topadmin']) {
  ?>
   <li><a href="manage_admins.php">Manage Admins</a></li>
  <?php
  }
  ?>
   <li><a href="expire.php">To expire...</a></li>
   <li><a href="account.php">Account</a></li>
   <li><a href="logout.php">Logout</a></li>
   </ul>
   </div></td>
      <td width="750" valign="top">
   <div id="adminContent">
   <h1><!-- InstanceBeginEditable name="Page Title" -->Add Document<!-- InstanceEndEditable --></h1>
   <!-- InstanceBeginEditable name="Content" -->
  

  So in the example above, shot one of the php (add_document.php) files, Miss me Admin.dwt.php records. So, if someone can tell me how my Admin.dwt.php file should look like (what I have to insert the names of the php files where code is copied to etc.) then it would be great

  If you save your new template, make sure that you do not remove the folder of models it is sitting in, or you get to start all over again...

  "I still wonder why have we published these model code on each of the files." Would it not easy to directly reference the model files.

  What you are descibing are the files Server Side Include, which in my opinion is the best way to have your navigation.  Think of it as a painting on several pages, when you put a picture on a web page, the server finds the photo and renders it to the screen.  If you need to change the image, all the pages would reflect the new pic update.

  One of the drawbacks of the models is to download all the pages that update, so if you have 50 pages, you must download 50 pages with all the changes.  With SSI, you change a file, a download file, all pages are updated.

  Gary

• Documents concerning the MODEL and CONNECT.

  Hello
  
  I want to read "MODEL" and "CONNECT BY" Clause.
  
  Where can I find good material with examples of elustrative for the same thing?
  
  Thanks in advance,
  
  Mathurin Shetty

  -private clause type link
  Re: help again for the SQL statement

  -connect by...
  http://www.Oracle.com/technology/oramag/Oracle/05-may/o35asktom.html

  http://psoug.org/reference/connectby.html

  http://www.sqlsnippets.com/en/topic-11735.html

  Re: How I can to prevent ==> ORA-01436: CONNECT BY a loop in the user data

• Impose a factor of scale between the model and FPGA

  Hi all

  I have a VS project configuration that unfolds on a real-time system. The project has an FPGA and a model. Some of the output of the cards of the OD of the FPGA model. In addition, some of the AI of the FPGA cards at the entrances to the model. Here's my problem. The AI FPGA gives me a measure of voltage, but the model takes only a pressure (bar) as input. This means that I need to convert my blood pressure using a table or a formula. How to make that happen?

  Also, I want to use the same lvbitx FPGA and the same model of dll on various physical parameters. The only difference between these physical configurations is the forumla/table (for example, a different pressure sensor is used). Is a convinient way to say VS use different table games?

  

  Hi oeua.uoeuau,

  If you have a formula to convert the voltage in pressure, you can use a calculated string to implement. You just point to the computed in your Channel FPGA output and the inport of your model to the computed string. If you need a table of choice, you can create a model of LabVIEW that takes blood and uses a lookup table to get the pressure reading and the outport of LabVIEW model port in the inport else your model.

  To switch between the different scallings, you can simply use a procedure to set a variable to be an entry or another.

  See you soon,.

  < brian="" a="" |="" national="" instruments="" |="" applications="" engineering="">

• Need help, connect to the wifi and Panel set to work.

  Let me start by saying that I recently downloaded malware bytes and microsoft security essentials. Malware found 4 corrupted files. I deleted the and also received a warning that the files needed to restore. I restarted the computer and then I realized that the computer wouldn't connect to the Internet wirelessly. There is no any wifi connection possible. I tried to access the firewall via the Control Panel, but I received a message saying that something is misspelled, and I needed to check my spelling and try again. I can't access anything in the control panel. I then returned to malicious software and restored the files and I don't know if it restored. Again, I have no wireless connections and cannot use Control Panel. I did a restore there when I knew that nothing was wrong with her, but he says that there is no change for a week about a week ago. I need help!

  What are the 'properties' can you get not to?

  If you were not able to see something like this picture--> http://www.askdavetaylor.com/4-blog-pics/windows-system-properties.jpg

  or you have to this Properties dialog box, but the part of the circle includes all mention of the Service Pack,

  Then, it's probably time for you to go to a good independent store (place of type no BigBoxStoreUSA or geeksquad) computer repair.  If they think they can reinstall Windows, ask them to back up your data (files, photos, music) first.  Ask them to tell you the consequences of reinstalling Windows before they do.