Windows not start displays the following error message

Similar Questions

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• When I try to use the Windows updates to and the following error message: Windows update cannot currently check updates, because the service is not running

  have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer

  Original title: update windows

  Solution 1:

  Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  Solution 2:

  You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:

  net stop wuauserv
  regsvr32 %windir%\system32\wups2.dll
  net start wuauserv

  If this does not help, try Microsoft Fix It service to reset your Windows Update components:

  http://support.Microsoft.com/kb/971058/en-us

  I hope this helps.

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• VC die randomly and the windows event viewer will display the following error message

  Hello

  in the last time we are experience a lot of vc crashes and the windows event viewer shows the following error:

  ORA-01483: invalid length for the DATE or NUMBER variable binding

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  ORA] ORA-12899: value too large for column 'VPXADMIN '. "" "" VPX_VM '. "" IP_ADDRESS"(real: 40, maximum: 16)

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  There is no update or modify the software to vmware esx/vc or oracle.

  Anyone has the same problem or have a solution/fix for this problem?

  Environment:

  Oracle 10.2.0.3 DB

  Virtual Center 2.5 U3

  VMware ESX cluster

  Vmware ESX 3.5 Server Patchlevel 1 x 143128

  3 x Vmware ESX 3.5 Server Patchlevel 123630

  This is a known bug in oracle - 10.2.0.3. Upgrade to 10.2.0.4 or install the Oracle patches 6085625 and 6452485 (as far as I remember you just one of them, but for the moment, I can't say that one)

  --

  There are 10 types of people. Those who understand binary and the rest. And those who understand the gray code.

• Assistants ' compatibility, troubleshooting or diagnostic "hang on display the following error message: error __An occurred when troubleshooting -"an unexpected error has occurred. The Troubleshooting Wizard can not continue. »

  I have Windows 7 RC OS installed on my PC. Sometimeback, I ran Windows 7 Manager (one click Cleaner) on my other partition where Windows 7 Ultimate is installed to clean all junk files. However, after removing these junk files my McAfee Virus Scan Plus ceased to work and simultaneously all my assistants troubleshooting and diagnosis also became disabled/inadmissible (statement of the error messages as mentioned above). Somehow after visiting the site of McAfee, I could eventually make my functional McAfee Anti Virus but this problem has not been resolved so far despite my trying all work related arounds suggested by various members of the forum of MSDN & TechNet Web sites.

  Error details:
  Package ID - PCWDiagnostic
  Path - C:\Windows\diagnostics\system\PCW
  Error code: 0 x 80131700
  Source - engine
  User - alok-companion\acees
  Context - high

  Hi ALOK CHANDRA SINGH,.

  Thanks for posting your question on the Microsoft answers forums!

  Error code 0 x 80131700 is generally relevant to the old version of the .NET Framework installed on your system. By default, the integrated Microsoft .NET Framework version is 3.5.1. You can reinstall Microsoft .NET Framework 3.5 Service Pack 1.

  Please follow the steps mentioned by Dale Qiao, see link below
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/2e8d4b54-b7d7-47BC-83cf-d9db907b037b

  If the problem persists,

  I suggest you try the following steps:

  Step 1: Start the computer in safe mode and check if the problem persists

  To use a boot option, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  c. when the boot menu appears again, the words "Safe Mode" appear in the bottom, select the installation that you want to start and then press ENTER.

  If you are able to work without any problem in safe mode then you can deduce that some third-party software is causing the problem

  Step 2: The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  Step 3: Run a scan online for any threat and try to fix them (in normal mode)
  http://OneCare.live.com/site/en-us/Center/cleanup.htm  

  See the link below: 

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  You can install version Windows 7 RTM (released to manufacturing) as many bugs and compatibility problem has been resolved.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The console of Windows Server Update Services (WSUS) falls down when you search for updates and displays the following error message:

  An unexpected error has occurred.
  Click the node server reset to try to connect to the server again

  Event type: error
  Event source: Windows Server Update Services
  Event category: no
  Event ID: 7053
  Date:
  Time:
  User: n/a
  Computer:
  Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
  Cause
  This can happen if the application cache is damaged.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Why am I see sitting "Homegroup journal" could not start with the following error: 0xC0000035

  repeated error seen in the event viewer.  How should a windows xp pro pc and a win 7 pro 64-bit laptop or network?  I have the laptop as a member of the task force of the older XP.  It is a peer to peer home network

  Hi mgmombo_726,

  ·         He has already worked?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow the steps in the article.

  Networking of computers running different versions of Windows

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• When my wife read his emails, the following error message is displayed before that windows live mail stops. Failed assertion. Program: c: Program Files | Windows Live\Mail\wlmail.exe

  When my wife read his emails, the following error message is displayed before that windows live mail stops. Failed assertion. Program: c: Program Files | Windows Live\Mail\wlmail.exe File:C\boost_1_36_0\boost/shared_ptr.hpp line 419 Expression: px! = 0 someone at - it ideas?

  original title: failure of the Assertion in windows Live Mail

  All Windows Mail issues belong to http://windowslivehelp.com/product.aspx?productid=15