Re: models. Why images appear as gray boxes?

Similar Questions

• Why my edited images appear as gray squares in the Organizer?

  No matter how to save an edited picture, it appears as a grey square with a tear or a square with a lock on the subject in the Organizer. What I have to do something in addition to recording?

  Use the file > Close or Cmd + W to get the picture of the location.

• Google Image Search shows only one page of results, then the gray boxes

  Since several months ago, google search for images watch gray boxes instead of the thumbnails after a random number of thumbnails correctly indicated.

  I've seen several posts on the web and several suggestions, but none solved the problem for me (FF 20.0.1, Windows Vista and Windows 7).

  Finally, I tracked down the source of the problem and found a workaround:

  Looking at the traffic on my firewall (iptables nat) I found this during the loading of an image search result:
  192.168.168.159 - > 74.125.234.226 TLSv1 alert (level: Fatal, Description: unexpected Message)

  So, I realized that since there is a time firefox uses https whenever we use google.

  The solution is after loading the image (with the gray boxes) search result, just replace the https to http protocol in the browser's address bar. Which loads the remaining without problem images when you scroll to the bottom of the page.

  IE does not have the problem because it does not have this redirect. If you load a 'good' search results in Internet Explorer, then replace http with https in the address bar, the same problem occurs in Internet Explorer.

  (so, apologize for posting this here, because it's not really a matter of "firefox", but given that most people are complaining that it is, I though it would be a good place for the available information)

  Thanks, but as I said, that is done the same if forced to https. I can boot to linux, and FF is the same, like chrome.

  So it's not anything related to the cache, cookies, or plugins or even FF FF. It's probably something in the firewall. I just posted it here because other people have been blaming FF for this problem (it is more likely to be seen in FF, because it was google redirect to https for 14.0.1).

  BR,

  Joao S Veiga

• dsloginitemhelper appears in the gray box at the start

  Can someone tell me why a gray box appears at the start of my who has 'dsloginitemhelper' in the title of the box and then disappears?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• Why 3 images appear in the quick launch instead of one?

  I installed Firefox 14.0.1 and when I click on the first time on the quick launch icon and Firefox loads correctly, immediately 3 layers of the icon images appear on the quick launch. and when I 'RED X' out and go back in I get a half of the screen of my favorites in gray!

  You have several tabs open and 'Show previews tab in the Windows task bar' selected in Options > tabs?

• BlackBerry Smartphones gray box instead of the image in a MMS text

  Hello-

  I have a problem receiving the images in a MMS text. Rather than the image appears, I often get a grey or blue box. This doesn't happen with each image, which makes me very confused.

  Does it have the same problem or know how I can solve this?

  I just wanted to say that I use have the same problem, but when I updated my software to the new version that I don't have more i's had people send me photos that I never could do before, so try that

• I recently installed on a new PC for Windows 10.  A lot of PDF images appear as solid gray fields.

  I recently installed on a new PC for Windows 10.  A lot of PDF images appear as solid gray fields.

  Hi John,.

  Please come on in Edition > Preferences > Page Display

  Check the option display large Images

  Click OK

  Let me know the result.

  Thank you

  Abhishek

• Why my image appears to the top

  I am at a loss here.

  Pond of prayer - "interactive prayer Journal.

  Why hell isn't the image appear? If I copy and paste the source of the image on the bar of the browser, it shows the picture so I know that there is a right way. But it will simply not appear. :-/ I'm pulling my hair out here.

  Anyone know?

  The add_style and the CSS lower_menu aren't there.  Either way, you might want to change anything to Add or a banner in his name to something else.  Often, these file names will send up red flags for advertising that allows you to block content blockers.

  Nancy O.

• How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 in. image

  How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 image open at the same time to work on. I e I can't pass a layer on the image to the other.

  OK - I got out my trusty Photoshop Elements 10 - The Missing Manual and figured it out. What I was trying to describe, it was how to make images with 'tab' images 'floating '? This has somehow reset without my knowledge. What you need to do to get your images 'Floating' back is to click on "EDIT" in your editor - at the bottom of the drop-down list hover your cursor to "GÉNÉRAL" and click on - at the bottom of the drop-down list, click in the bottom left box 'ALLOW FLOATING DOCUMENTS IN FULL EDIT MODE' - and then click OK.

  That solved my problem!

• Help place the images - why they appear to 150% and a bad image?

  Hello

  Relative newbie here.

  I have my display performace in InDesign too high. If I "place" an image or just simply slip it on the page, and little matter which image file format I use (tif, png, jpg, whatever), when placed, the images appear about 50% bigger than the source and low - ish quality. I have then to try to manually resize them so they look good on screen and when printed.

  • Why when I place images not appear 100%?
  • Is it possible to resize images other than striking handles resize and hoping for the best?

  Thank you very much.

  OK, if the balance indicates 100% with the direct Selection tool, that's what you have. Note that using the regular selection tool (the black arrow) will ALWAYS show 100% in the areas of scaling unless you have set your preferences to 'adjust scaling percentage', this is why you use the direct Selection tool to check. You can also select the image with the tool and look at the Info Palette. the real and effective ppi listed will be the same at 100%. What resolution is currently in the range of information?

  I asked vs click, click and drag because in CS4 when you drag an image is still growing the image to fit. That's not true in CS3.

  Screenshots are generally 72 ppi to size, they are captured. 72 DPI is low for most of the printed work, but no one expects very much in terms of quality for screenshots. You really place, right, is not dragging from Photoshop in ID, which is the equivalent of collage? Paste a picture gives you only the preview screen in CS3. I'm not sure you will see a difference with a screenshot, however, since the preview will be also 72 dpi.

  If the image is really too large on the page you can evolve in ID now the Ctrl + Shift keys while dragging a handle. You must press the keys before you click the mouse in Windows because there is a bug. You can also use the scale tool, or enter a new value of the scale in the areas of scaling. You can use actual dimensions in these areas if you include units, incidentally.

  In Photoshop, you can adapt the image using Image > Image size... If you uncheck the 'resample image' the resolutiuon will change inversely proportional to size, in order to reduce the size will increase the resolution, but there will be no difference in quality during the scaling in ID.

• Why iphoto and facetime video images appear dark?

  Hi all!

  I have the Macbook Pro 15 inch, late 2013, OS X 10.9.4 retina. My iphoto images appear dark that they normally used to look like on my Macbook. Even when I do facetime, video seems to be dark. I first thought that there could be some problems of substantive lighthing. I tried to adjust the camera in every possible angle. If, by chance, the facetime video seems to be normal after adjustments, it will disappear in a few seconds and the video will get darker still.

  Anyone know how to fix this? Your help would be very appreciated.

  Thank you very much!

  General representation is dark as well?

  The brightness keys are easy to handle 'accidentally '.

  

• Why does my image appear black?

  I just loaded CS4, open a previous file in Photoshop, the image appears in black, it looks fine in the browser, and when I drag the screen he appears, as soon as I let go he turns on the black for again. The file seems fine in Bridge. I have Windows Vista and updated for CS3 where the image seems in good condition when opened in Photoshop.

  ... also make sure that you have updated PS version 11.0.1 and, if the problem persists, turn off OpenGL in Preferences > Performance.

• Previous slide images appear on the next slide...

  In Captivate, when I add a new slide, the previous slide boxes and images appear on the new slide.

  They are not clickable and I am unable to remove them, but when I preview the blade in a browser, images etc. are not there. What is a graphics problem? I use a retina 13 '' MacBook Pro.

  Thank you.

  I also use a retina display, do not think it is related to that.  There are some possible causes. Maybe, but you have these timed elements "rest of project" don't check off the option "Always we top", which could explain why they do not appear when published if they are covered with normal objects on a slide. Less likely: objects on the slide used or main slide?

• set a background image for a text box or label?

  Hey gang,

  I would like to put a background image for a text box or label.

  is there a way to do this?

  also if I put the bottom level of the container root and do the rest orders slightly transparent (opacity: 0.8 or something), the background appear through?

  Thank you

  J

  for your text box, define backgroundVisible: false & and/or upgrade the opacity to the low enough that you can see through it and place your background image behind the text box. (I belive opacity changes will affect the text as well).

  for labels, I used the method of the container as you described.

• My start ORB, replaced by a square gray box when right click on it.

  My start ORB, replaced by a square gray box when right click on it. This grey area also attach with a word of 'start '. How can I solve this problem?

  My start ORB, replaced by a square gray box when right click on it. This grey area also attach with a word of 'start '. How can I solve this problem?

  Hello

  It seems that your office has been changed to the classic theme.

  What just happened when you started the computer? You have a selected Aero theme before this happened?

  First, right-click on the desktop and select Personalize. Try to select one of the Aero themes to see if this solves the problem.

  If this does not work, try to run the Aero troubleshooter.

  Run the Aero convenience store.

  Open Control Panel and type Troubleshooting in the Search box.

  Select Search and solve problems.

  Under appearance and personalization, select display Aero desktop effects.

  In the Troubleshooting Utility dialog box, click the Advanced Options link and place a check mark in the apply repairs automatically option.

  Click Next to start the troubleshooter.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP