Re: My new C50 of Satellite does not work / blue screen

Similar Questions

• New Modem - like get a new modem my printer does not work

  Since obtaining a new modem, my printer does not work. The printer is a HP 4500 wireless all-in-one. What should I do?

  Hi reillydebra,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?
  3. what operating system do you use?

  If you use Windows 7, try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Additional information:
  Check if you need to open ports in the modem.
  http://h20563.www2.HP.com/p/_wireless/troubleshooting.html
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=59455&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3919449

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Z10 ATT BBZ10 10.3.2.440 blackBerry software does not work well: screen distorted, keyboard. How downgrade?

  ATT sent a software relaease 10.3.2.440 which was downloaded on my BBZ10 and does not work well: screen distorted, difficult of keys and numbers located on the edges of the keyboard, etc, etc. How downgrade to previous realease of software which worked very well? Thaks for specific support on the issue and BBZ10.

  FDR wrote:

  ATT sent a software relaease 10.3.2.440 which was downloaded on my BBZ10 and does not work well: screen distorted, difficult of keys and numbers located on the edges of the keyboard, etc, etc. How downgrade to previous realease of software which worked very well? Thaks for specific support on the issue and BBZ10.

  Switch magnifying glass Mode OFF in settings - accessibility.

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• New mini optical mouse does not work

  Hi all:

  I used a mini mouse optical for a few years now without a single problem. I just plugged into the USB port, and that's all. Yesterday it died on me, so I bought a new.

  The mouse does not work and the cursor stays frozen at least that I move it using the touchpad on the laptop.

  OS is Vista
  Satellite P100 series

  More information:

  -the little wheel on the mouse will allow me to scroll the page to the bottom, but it's just what works
  -the drivers are all up to date
  -restore the computer to an earlier date
  -run a full virus/malware scan, nothing came
  -USB are good; I tried all ports, including the ports where something else that works has been connected
  -After I restore and connect my mouse in I saw the computer install the latest drivers

  The only thing I can think is that the new mouse is defective but I doubt that. However, it is possible I suppose.

  Can anyone else think of any other possible explanation and how I can solve this problem. Could something changed in the BIOS? Is there a setting that has changed I have to look?

  Thanks for sharing this with us!

• My original opening on a new Mac Mini installation does not work. I have the series or available

  Opening 1 and implemented to date are installed on a MAC Pro: 2 x Dual-Core Intel Xeon 2.66 GHz. memory 5 GB

  Software: MAC OS X Lion 10.7.5.

  Now, I would like to install Aperture on a new Mac Mini: 2.6 GHz Intel Core i5. OS X: El Capitan.

  All the series nor are available.

  But the Mac Mini can't find software to install, even if the disk is in the drive.

  Need your help to tackle this problem.

  Thanks in advance

  Opening 1 does not work on El Capitan. You need minimum Aperture 3 and which is no longer sold. Time for a new plan.

• C850-A797 - Bluetooth driver satellite does not work after upgrade to win 10

  My laptop Satellite C850-A797 upgraded to windows 10 last week and Bluetooth driver not working since upgrade,

  I installed the battery Bluetooth for windows ver.9 but it also does not work.

  can someone help me with this please?

  C850 satellite is not listed as a book of 10 Windows compatible.
  This means that Win 10 drivers are not available for this unit.

  In any case, I recommend you to go to Device Manager and remove / remove Bluetooth all the partners of the devices and entries.
  In the view of mark tab also the option Show hidden devices in order to get the big picture complete.

  Now after reboot, win 10 must search for removed devices and drivers missing.

  I hope this could solve your problem of BT.

• Brand new Dell 2808 router does not work.

  1. the 2808 is not connected to the internet.

  2. when it is received, the 2808 under tension with the disabled DHCP server and port active routing. It is the default setting. Not good to use normal, but worked as advertised. The DHCP server is usually needed in a small switch. I needed an active DHCP service.

  3. I've changed managed and connected fashion. A "saved to restore configuration screen" appeared. Horrible thing. Trashed the router. There is no saved configuration, the 2808 restarts. 2808 completely stopped working after that.

  4. after resetting 2808, the 2808 seemed no longer routing packets, so nothing works now with the exception of the web client, which does not seem to do anything for the networking.

  5 I did activate the DHCP client and configure the IP pool. However, no routed packets, nothing works. Port au port data routing does not work. The DHCP server is not required to allocate IP addresses.

  6. I paid 80 dollars to a so-called "Dell Customer Service" held to solve the problem. They have failed. It turns out that they did not know how to work the 2808.

  7 I have not understood how to contact customer service the Dell directly for the 2808. Not good. I bought a T7810 workstation in 2015 with 5 years of service from Dell, and I don't know how to contact Dell support technical support. I use the 2808 with the T7810. Both should be covered if the customer service could be found.

  8. bottom line, I bought the 2808 on July 27, 2016, and many hours later my effort and more hours of a consultant, I am frustrated trying to run home mode: a router 8-port 1000-baseTpacket with a DHCP Server enabled. I'm about to box 2808 router back to Amazon because it does not work and cannot be implemented.

  Any ideas?

  Thanks in advance to 1 million.

  Keith

  The simplest method to contact support is to enter the serial number on our support site.
  http://Dell.to/20VqlwQ The site will then list the various methods to contact support for this range of products.

  The 2808 PowerConnect doesn't have a console port, so recovery is somewhat limited. If the switch is on firmware version 1.0.0.38 or earlier, then a factory reset can be done by simply changing the transition from managed to not managed and then again. If the switch is on more recent firmware, however, this process does not reset the switch to factory default.

  Being a new switch, it should be under warranty. If the switch is not recoverable, support should be able to get a replacement sent to you.

• The new facebook blackBerry smartphones does not work on my blackberry 8520

  I downloaded the new version of fb 1.9 and now my phone is freeze someone at - it a link to version 1.8 I tried the link in the forums, but it does not work

  The instructions I provided in another topic are you referring? The link seems functional for me.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Curve-BlackBerry-8500/curve-freezes-when-used-face...

• Why my new 6s iPhone Bluetooth does not work?

  Hello! I recently bought an iPhone 6s and when I turn on the Bluetooth it is looking and looking and never find my other phone, it never finds any device.

  What can I do to fix this?

  Look at bluetooth can find other iphones, but if you it does not work, try to find my iphone

• CHK DSK/r & CHK DSK/p does not solve blue screen UNMOUNTABLE BOOT VOLUME... any suggestions?

  Hi, need help please. After an update of windows, there was a couple of error message on my computer, and then one day, he came with a blue screen at the beginning by saying "UNMOUNTABLE BOOT VOLUME". OK, I googled and he said everywhere to have an installation CD (which I have) and then perform the CHK DSK/r, CHK DSK/p or CHK DSK/r/p that I did all 3. Then I typed in FIXBOOT c:... ok, well... seemed so I typed in the output. Blue screen again! He tried again and again without success. I would NOT be this format... we have a lot of customer files on this computer... ANYTHING else out there to try? I can't find any other information. Any help would be GREATLY appreciated. Thank you...!

  Hello - there was only 1 partition, and I think I know what it was. It was see the external hard drive - which I NOT formatted and works very well - and now that I have disconnected, he says "hard drive not found '. Now, I can not format the main computer! Should I rehook it? I just don't want this external hard drive to be formatted. How to format my computer (since CHK DSK does not work) with the CD? I just get the message 'cannot see the hard drive. Thanks for your help.

  N ° not re - hang. In fact, you must disconnect all devices from the computer except for your keyboard and your mouse. This includes, but is not limited to, your printer, card readers or other devices other than your cd rom of course media.

  The error you receive is probably due to your SATA controller driver is not being installed. Restart the computer and enter the bios. See if you can find the option to disable the AHCI or RAID and IDE SATA (SATA/PATA) emulation mode. Windows should detect your hard drive.

  Finally, if you are unable to find the option to turn off the AHCI/RAID mode, provide me the full brand and the model number of your computer.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Satellite Pro C50 - A - BT does not work on a machine virtual Windows XP Home edition

  Hi people,
  We bought a C50 - A Pro of the Satellite with windows 7 installed to run a specific industry software that will work on win xp. We are running xp on a virtual machine that is installed.

  The problem we have will connect to a specific device by Bluetooth. While we are not very tech savvy, we are able to connect this device to other computers running windows xp, 7 & 8 use Bluetooth Assistant.

  The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

  We have v9.10.11 (t) of installed Toshiba Bluetooth stack. We were in the guide-utility Toshiba Bluetooth and checked for the updated driver but are always blocked.

  Can anyone tell if there is something specific to the Toshiba we have not been able to identify? Assistance would be greatly appreciated.

  Best regards, evil.

  > The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

  Any news? Have you found a workaround?

  I don t use the virtual machine and to be honest I m not very well why you can not connect to the other BT device but in my opinion the question isn't associated with the battery of Toshiba BT from the stack seems to work correctly because the BT device is recognized properly.

• C50-A0113 satellite does not start in windows

  Hello.

  I have a toshiba satellite laptop C50-A0113 8 64-bit windows running.

  Ive had exactly two years a few days ago I restarted and then when it starts up, it stops at the screen "Toshiba leading innovation" and then he said: scanning and repair drive C, while on this screen it starts the process and then stops at 34%.

  It was two days ago now it just gets stuck on the "screen toshiba innovation leader" and then after a few minutes, it says preparation auto repair.

  Then he leaves the screen and goes to a screen black for a few minutes then flashes the blue screen written "your computer has encountered a problem" then restarts.

  I tried to create a bootable windows disc 8 in order to repair, but it does not start even in the usb port.
  I restart and press f12 to select the media to begin. It checks the media goes to the toshiba screen, then everything goes black for a few minutes until what it restarts.

  Can I please know what is the problem and how can I possibly fix it because the problem is clearly not my hard drive.

  I have removed and put into another laptop and it was fine

  Hello

  If you want to start Notepad using external media (such as a CD or USB flash memory key) you must disable the secure in the BIOS boot option.

  If you want to install Win 7, you must also pass the CSM mode UEFI Boot Mode.

  For me it of not quite clear if you created the recovery media (flash memory stick or disk)

  If you created one in the past, you could use this recovery media to put the laptop back to factory settings.

  In the case where this is not possible, some of the material (perhaps HDD) could be affected.

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.