Re: NB 200 could not start, the screen remains blank!
Hello
I bought my NB200 Aug 2009, it works fine for me until about 2 weeks ago.
One day, I turned it normally, second day morning, I tried to trun, I see that power light, plugin light, light to the top of the battery, the drive HARD light flashed once for maybe 2-3 seconds, then fade. And the screan remains off all the way.
I tried to remove the battery, unplug, wait up to 3 hours, put it all back, still does not start.
I also tried with different RAM, but the result remains the same.
And the situation get worse and worse. About 2 weeks ago, when he started, after about 10 tries, I could get it early. This morning, I had to try more than one hour and finally got lucky once.
So, is anyone having the same problem? Any suggestions?
Please help me!
Hello
Akuma is right, you should contact the service center to fix it. It was purchased in August 2009 and he is still guaranteed, they will repair it for free.
Welcome them
Tags: Toshiba
Similar Questions
-
Re: Satellite A135-S2276 - does not start, the screen is blank
I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.
Can someone help me with the answer? Thank you
Dennis
It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...
-
Could not start the screen saver
original title; Windows 7
I can't get the screensaver to start I went to the heart Control Panel and set up to start in 5 minutes but it does'nt
Hi Johnqk,
Usually, this means that some type of input is detected which keeps the timer reset. In general, I see that in wireless mice (mice?) who transmit their position even when no movement has occurred.If you have a wireless mouse, try these instructions from the How-to Geek :If that does not apply, please let me know. -
I tried to reset and tried a new stick of memory without result. I think it's the graphics chip together, but not sure. The next step is replace the motherboard (rather than try to replace the graphic chipset) but I would like to know if the
Flashing LED on the SHIFT key is tell me anything. It flashes 5 times, pauses and blinks 5 times and it repeatedly. Anyone knows what this means, or have any other suggestions?
Thanx
R.J.
Hi @rje77,
Welcome to the HP Forums!
I read your post on your laptop HP Pavilion g6 and issues with flashing lights. Beep codes to listed here.
Have you tried to reload the factory-installed BIOS configuration settings. http://ow.ly/Jsqq302g0dj.
Let me know.
If you want to say thanks for my efforts to help, click on the thumb to to give me a Kudos.
Thank you.
-
Original title: HELPPPPP
My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/
Hey ChelseaHarris,
Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
Could not start the Windows Security Center service.If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
Microsoft safety scannerHope that helps.
-
I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.
Code 80246008
Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;
Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect
Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help
Try this:
To change or restart the Service (BITS) Background Intelligent Transfer
Open administrative tools by clicking the start
, clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.Double-click Services.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.Right click on the service of Intelligent Transfer (BITS) background and then click Properties.
Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.
Next to Service status, check whether the service is started. If not, click Start.
-
NAC AD SSO error: could not start the SSO service. Please check the configuration.
Hi, can someone please help me with a problem of SSO?
I'm trying to start the SINGLE sign-on service, but when I try to update I get the error message: "error: could not start the SSO service.» Please check the configuration. »
The announcement is a Windows 2008 Server Standard R2 (64-bit) running at a 2003 domain functional level. (several servers) with the deployment of the OOB
I was unable to ping the advertising server CASE CLI, so I created a static route to the announcement on the server of the ANC, and after that I successfully of the NAC Server ping IP address of the AD. The nac_server.log when I try to start the SSO:
[[email protected]/ * / _primary_ag ~] # ping 10.200.0.3
PING 10.200.0.3 (10.200.0.3) 56 (84) bytes of data.
64 bytes from 10.200.0.3: icmp_seq = 1 ttl = 128 time = 0,247 ms
64 bytes from 10.200.0.3: icmp_seq = 2 ttl = 128 time = 0,232 ms
-ping - 10.200.0.3 statistics
2 packets transmitted, 2 received, 0% packet loss, time 999ms
RTT min/avg/max/leg = 0.232/0.239/0.247/0.017 ms
[[email protected]/ * / _primary_ag ~] # tail-f /perfigo/access/tomcat/logs/nac_server.log
2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1
2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1:DURATION = 0
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser:DURATION = 0
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br:DURATION = 0
2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR
2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR:DURATION = 0
2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save
2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 0
2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer
2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION = 0
2012-07-27 17:20:58.605-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
[2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 173d72d [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=11093,localport=1099]]
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]
2012-07-27 17:21:18.610-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:21:38.615-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:21:41.794-0300 DEBUG Thread-246 com.perfigo.wlan.common.HttpClientResource - go to url https://10.200.48.100:443 / wlan/gss/GSSNotificationServlet ...
[2012-07-27 17:21:41.813-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: added the socket: 1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]
2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1
[2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]
2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus
2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus:DURATION = 0
2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:44.106 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 1
2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:21:58.619-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:04.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 1
2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:14.117 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1
2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:17.017-0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 2
[[2012-07-27 17:22:17.017 - 0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]]
[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: socket: 59725 c added [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]
2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 3
[[[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]
2012-07-27 17:22:18.624-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]
2012-07-27 17:22:32.022-0300 com.perfigo.wlan.ssl.SSLLog RMI Scheduler (0) DEBUG - RMISocketFactory:CACHED_SOCKETS_SIZE = 2
[[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]
[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: moved socket: 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]
2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection
[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]
2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection
[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]
2012-07-27 17:22:34.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 1
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
[[email protected]/ * / _primary_ag ~] #.
Thank you
Moises,
I wanted to know if you have followed these steps:
Thank you
Tarik Admani
* Please note the useful messages *. -
Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:
Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.
original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion
Hello
Remember to make changes to the computer before the show?
You can follow the below methods:
Method 1: Restart Windows and try to start the Security Center service.
If you still receive the same error, make sure that the WMI service is launched and running:
(a) click Start, run , and then type Services.msc
(b) double-click Windows Management Instrumentation
(c) set its startup type to Automatic
(d) click Start to start the service, and then click OK
(e) restart Windows.
Method 2: Restart the service
Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.
To restart the IKE and AuthIP IPsec Keying Modules service:
To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.
(a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:
· Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.
· Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.
(b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.
(c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.
Note:
You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.
You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx
Method 3: Run a scan of the System File Checker.
http://support.Microsoft.com/kb/929833
It will be useful.
-
Satellite Pro L300-21F does not start and the screen remains blank
L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.
So my questions are:
1. He's probably right?
2. is it a common problem with an easy solution?
3. what else can do before shelling out for a new Board of Directors?
4. is there a link where I can find how to disassemble the case?Any help appreciated
Hello
> 1. He's probably right?
Yes, it looks like motherboard failure
> 2. Is this a common problem with an easy solution?
If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...
> 3. What else can do before shelling out for a new Board of Directors?
I don't think you can do anything with fried mobo
> 4. Is there a link where I can find how to disassemble the case?
Take a look at the site called irisvista.com
-
I have error #1053 windows could not start the printer spooler. Help
Windows could not start the printer spooler. I received the error #1053.
whatever it is sent to the printer never finished loading and crashes to the top
my computer, so I have to re - start.This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions. Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.
-
Could not start the time service windows on the local computer 2 error
Cannot update the system clock of time Internet.After double click to display the time in the taskbar, the Date and time properties window appears.
Then I time tab-click Internet, and then click Update now - this produces the following message..."Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".Then I clicked on start > Control Panel > Administrative Services > Services > time WindowsI click Start the service and get the following message..."Could not start the time service windows on local computer.""error 2: the system cannot find the file specified."Help! What now?Hello
Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.
-
Update CPU which proved later to be bad. Replaced by original CPU. Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2. Integrated Service Pack 3 which I got from the MS. site Everything works well except for Windows Update. The setting seem to be correct in Administrative Tools/Services. The status of the Service is "stopped". When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer» Used the range of anti-virus and malware and found nothing. Currently using Avast 7.0.1426. I also used various tools of Fix - It MS nothing helps. Any help would be greatly appreciated. Thank you.
Hello
1. what application or antivirus security suite is installed and your current subscription?
2 Norton (another) or a McAfee application ever installed on this machine?
3. What are the fix applications that you used so far to try to fix this problem?
Try the next method and check if that helps you with the question of the 127 error you receive.
Method 1: Rdding the DLL file by doing the following:
1. Click Start and click Run, in the search box type CMD and press to enter.
2. right click on CMD in the list and click "Run as Administrator".
3. type the following command and press ENTER. Regsvr32 msvcp71.dll
4. close the command prompt window.Method 2: run the file system (CFS) Checker:
(Note: you need an XP installation disk to start the System File Checker search.)
The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.
1. click on start, and in the box to start, search type CMD
2. right click on CMD in the list and click "Run as Administrator"
3. type the following command and press ENTER. Sfc/scannow
4. close the command prompt window.For more information on scan SFC (System File Checker), please look in the link mentioned below.
http://support.Microsoft.com/kb/310747
I hope this helps.
-
Could not start the Security Center Service
I clicked on Windows security alerts, it showed "The Security Center Service is disabled". Then I clicked "Activate now", came a "Could not start the Security Center Service" message. Please tell me what I need to do.
Thank you very much!!!
Longpo
See if these are useful:
http://support.Microsoft.com/kb/2519899
OR
-
Could not start the Windows Vista firewall
Hi all
I can't start the Windows Firewall service in anyway.I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.As it seems, I can not start it this way or the other.I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »Therefore, it does not. The service is set to automatic.I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »Still, I can't find a way to fix the problem. In addition, the service is set to automatic.So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means?EDIT:The base filtering engineIKE and AuthIPsec Keying ModulesInternet Connection Sharing (ICS)IPsec policy agentRouting and remote accessWindows event collectorWindows FirewallAll of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.EDIT:I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».EDIT:Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.
-
error message
Windows could not start the Bonjour service on local computer
Error 5 access is deniedI have Vista Home.
This prevents me to update I have tunes.
Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.
Maybe you are looking for
-
HP Pavilion b123es-15 Sleekboo: windows 7 Desktop Mobile windows 8
Hello I have hp pavilion 15-b123es Sleekbook, and in the site, it has drivers ONLY for windows 8 and above, I can install windows 7 on this laptop and I will have problems with drivers? Thank you!
-
Error 0x800CCC90 send or receive e-mail in Outlook Express
original title: receives the following error message when you try to send or receive mail with outlook express. Blind (younger than success) when trying to access the messages. Error message The server responds with an error. Account: 'Jon Swain', se
-
I read where WMA audio books work best on the fuse when played podcast. In my Windows Media Player11 Sansa Fuse section, I'm not able to change the podcast genre, because it does not appear as an option. Podcasts appear on the player itself, but I ca
-
Hibernation and standby disappear after replacing hard drive
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: recently replaced a hard drive to 120 GB (IDE) with a 1 TB drive (SATA) on an E-Machines T-3516 under Windows XP SP3. Lost my hibernatio
-
microsoft WPD file code 10 port of System Volume #0004 driver #0008
Driver does not, will not be at level or take the repair made by fixit