RE: router wrt310n - need help for configuring wireless security

Similar Questions

• I need help for configuring security for my wireless again.

  Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.

  original title: Wi - Fi Protected Access

  Hi dmcangus,

  See the Microsoft articles below for more information on WPA wireless security.

  Configure Security Wireless WPA for home networks

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security

  Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP

  http://support.Microsoft.com/kb/815485

• Need help for reading in parallel on the same interface and writing XNET

  Hello. I need help to configure CAN interface to write and read from the same interface.

  I use NI PXI-8513/2. I use CAN1 as interface.

  My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

  So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

  I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

  What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

  I think I would get errors that interface is already in use.

  Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

  I opened to suggestions of how best to implement the interface.

  I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

  Thank you

  Hi Rus,

  The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

  Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• What services do need me for a wireless network running?

  Original title: wireless network.

  What services do need me for a wireless network running? Or is completely managed by the modem provided from my ISP?

  Assuming that you have manually stopped no Windows services, your PC is in good condition, and is equipped with a wireless transmitter/receiver, other than to locate your modem in the list of available wireless signals and by entering the password, you have nothing to do... :-)

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• Hello, I need help for cancel the payment on my adobe account.

  Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...

  Cancel your membership creative cloud

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• I need help, I forgot my security answers and Email not send to my Email of relief.

  I need help, I forgot my security answers and Email not send to my Email of relief.

  Unless it is in a spam filter, you have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (137175)

• HP C4580 not scan to PC. I need help to configure my Netgear router please :)

  Hello

  I've read here, the threads that talk about this printer prints only not to or from a PC - my problem is that the C4580 go scan from my PC, but will not scan to PC.

  I found an answer from someone who has had the same problem earlier this year, but I do not understand what to do.

  Here's the answer:

  "I have ordered mine entering the settings from my router (Netgear) page and setting the built-in firewall rules. "The internal firewall was blocking the printer, I could print, scan using the computer, just could not scan from the printer to the computer.

  Also, I have a Netgear router, but could do with help on how to do the same thing as the person above.

  Thanks in advance for any help!

  Sorry, I don't need help after all

  It was not the router requires a configuration, it is the firewall that was a block that should be changed to "allow".

  My "all-in-one" now does everything it is supposed to do

• need help setting up mocrosoft send my friend uses netgear wireless rural upstate ny need help for incoming, outgoing server POP3 etc info...

  try to set up my microsoft email in my pc. I need to respond to the need help sbout incomeing craiglist.i and out going.

  I have no idea to find my server address. I use connect netgear wireless.

  Hello

  Looks like you need configure Windows Mail

  you need to configure your e-mail account windows mail with your ISP internet service provider

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• need help for the start up programs etc too of > > > >

  I am currently using Ccleaner as my msconfig works not what me hae questioned here in any case there are 3 categories of start they are; Windows, internet explore and scheduled tasks, can someone tell me which ones I can disable

  Windows.
  Yes HKCU:Run CTFMON. EXE C:\windows\system32\ctfmon.exe
  Yes HKLM:Run Adobe ARM "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe"
  Yes HKLM:Run ArcSoft Connection Service C:\Program Files\Common ArcSoft Service\Bin\ACDaemon.exe
  Yes HKLM:Run CTSVolFE.exe "C:\Program Files\Creative\Mixer\CTSVolFE.exe" / r
  Yes HKLM:Run Dell QuickSet C:\Program Files\Dell\QuickSet\quickset.exe
  Yes HKLM:Run ehTray C:\WINDOWS\ehome\ehtray.exe
  Yes HKLM:Run HotKeysCmds C:\WINDOWS\system32\hkcmd.exe
  Yes HKLM:Run IgfxTray C:\WINDOWS\system32\igfxtray.exe
  Yes HKLM:Run IntelWireless "C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe" /tf Intel PROSet/Wireless
  Yes HKLM:Run IntelZeroConfig "C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe".
  Yes HKLM:Run MSC "c:\Program Files\Microsoft Security Client\msseces.exe" - hide - runkey
  Yes HKLM:Run persistence C:\WINDOWS\system32\igfxpers.exe
  Yes HKLM:Run SigmatelSysTrayApp %ProgramFiles%\SigmaTel\C-Major Audio\WDM\stsystra.exe
  Yes HKLM:Run "C:\Program Files\Common Java Update\jusched.exe" SunJavaUpdateSched
  Yes start common digital line Detect.lnk C:\Program Files line Detect\DLG.exe

  Internet Explorer
  Yes the Blog Extension this C:\Program Files\Windows Live\Writer\WriterBrowserExtension.dll
  Yes Extension diagnose connection problems... %windir%\Network Diagnostic\xpnetdiag.exe
  Yes expansion Messenger C:\Program Files\Messenger\msmsgs.exe
  Yes search Extension C:\PROGRA~1\MICROS~2\OFFICE11\REFIEBAR. DLL
  No Skype Extension click to call C:\Program Skype skypeieplugin.dll
  Yes Helper AC - Pro C:\Documents and Settings Settings\doug\Application Data\Complitly\AutocompletePro.dll
  Yes to support Adobe PDF link Helper-C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll
  Yes to support Google Toolbar Helper-C:\Program Files\Google\Google GoogleToolbar_32.dll
  Yes to support Google Toolbar notify BHO-C:\Program Files\Google\GoogleToolbarNotifier\5.7.7227.1100\swg.dll
  Yes Helper Java (TM)-plug-in 2 SSV Helper-C:\Program Files\Java\jre6\bin\jp2ssv.dll
  Yes Helper Java (TM)-plug-in SSV Helper-C:\Program Files\Java\jre6\bin\ssv.dll
  Yes Helper Class JQSIEStartDetectorImpl-C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
  No Skype Browser Helper C:\Program Skype skypeieplugin.dll assistance
  Yes to support Windows Live Sign - in Helper C:\Program Files\Common Files\Microsoft Shared Windows Live WindowsLiveLogin.dll
  Yes the toolbar Google Toolbar C:\Program Files\Google\Google GoogleToolbar_32.dll

  Scheduled tasks
  Yes the task FacebookUpdateTaskUserS-1-5-21-1220945662-573735546-839522115-1003Core C:\Documents and Settings\doug\Local Settings\Application Data\Facebook\Update\FacebookUpdate.exe/nocrashserver/c
  Yes the task FacebookUpdateTaskUserS-1-5-21-1220945662-573735546-839522115-1003UA C:\Documents and Settings\doug\Local Settings\Application Data\Facebook\Update\FacebookUpdate.exe /ua /installsource scheduler
  Yes the task GoogleUpdateTaskMachineCore C:\Program Files\Google\Update\GoogleUpdate.exe/c
  Yes GoogleUpdateTaskMachineUA C:\Program Files\Google\Update\GoogleUpdate.exe /ua /installsource Task Scheduler
  Yes the task antimalware software of Microsoft scheduled scan c:\Program Files\Microsoft Security Scan of Client\MpCmdRun.exe - ScheduleJob - RestrictPrivileges
  Yes the task MpIdleTask c:\Program Files\Microsoft Security Client\MpCmdRun.exe - IdleTask TaskName - MpIdleTask
  Yes the task photopadShakeIcon C:\Program NCH Software\PhotoPad\photopad.exe - shakeicon

  Please let me know if I can disable some and what I can disable without is doing something important... Thanks for your help.

  Yes HKLM:Run Adobe ARM "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe"
  Yes HKLM:Run ArcSoft Connection Service C:\Program Files\Common ArcSoft Service\Bin\ACDaemon.exe
  Yes HKLM:Run CTSVolFE.exe "C:\Program Files\Creative\Mixer\CTSVolFE.exe" / r
  Yes HKLM:Run Dell QuickSet C:\Program Files\Dell\QuickSet\quickset.exe
  Yes HKLM:Run ehTray C:\WINDOWS\ehome\ehtray.exe

  Yes HKLM:Run SigmatelSysTrayApp %ProgramFiles%\SigmaTel\C-Major Audio\WDM\stsystra.exe
  Yes HKLM:Run "C:\Program Files\Common Java Update\jusched.exe" SunJavaUpdateSched

  Yes the task GoogleUpdateTaskMachineCore C:\Program Files\Google\Update\GoogleUpdate.exe/c
  Yes GoogleUpdateTaskMachineUA C:\Program Files\Google\Update\GoogleUpdate.exe /ua /installsource Task Scheduler
  Yes the task photopadShakeIcon C:\Program NCH Software\PhotoPad\photopad.exe - shakeicon

  I would disable them. but you have to download Autoruns:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  More info comes from Stanley S. and it should help you before you decide who to disable.

  Only startup items that I run are elements of microsoft.

  To demand the same tasks.

  Solutions Explorer, it seems that you have too many toolbars for me, but you should get each of them to see if you want it to run as an add-on, you could also disaable each addon one at the time and the surf for a while and if all is ok, leave this option unchecked.

• I need help with the wireless system. One of my computers doesn't seem to get signal

  Hello, I installed Belkin F5D8235-4 router and im get the signal on one of my computers. On the other computer, it seems that im getting the signal, but it says unidentified network. When I try to open the internet it says is Interenet Explorer cannot display Web page. Do you think this could have to do with the card in my computer is not not compatible. I have an Atheros AR5007 802. 11 b / g WiFi adapt. IM thinking that if I buy a D-Link wireless G USB adapter, USB wireless adapter Compact of Linksys or a Belkin 54 G Wireless USB Adapter my computer may be able to get the signal. What can I do? Help please

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? With the help of WPA/WPA2 security? You put on the G and N or N
  only? A to G for this adapter connect the send.

  Your Atheros should be consistent - could be drivers.

  Actually try updating your driver and disabling the network logon. (To do this, use a wired connection or)
  Download drivers on another machine and transfer on removable media).

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.