HP C4580 not scan to PC. I need help to configure my Netgear router please :)

Similar Questions

• HP psc 1210 all-in-one: after installing Windows 10 my hp psc 1210 does not scan, I get a "need WIA driver" (but it prints)

  Hello

  I installed Windows 10 about 3 days ago. The printer will print but when I try to scan I get the following error. Thanks in advance. print but when I click on Scan

  Hi @gregmalnickhp,

  I see you found the error "required WIA driver. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  The WIA drivers are part of the Windows operating system.

  Download and try to fix the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

  Back up the registry first.

  How to back up and restore the registry in Windows.

  Restore default startup for Windows Image Acquisition (WIA) Type.

  If you're still having problems, I would say to uninstall and reinstall the printer software.

  Temporarily, run Antivirus software and try to scan the image.

  If there is anything else I can help you, let me know. Thank you.

• WMI does not work correctly. I need help fixing mine

  I have a program that has access to my WMI to keep my access key activated and it does not work.  I have windows 7 64 bit and need help please.

  Hi Youtoo54,

  ·         What is the name of the program that you are facing this problem with?

  ·         You receive an error message or error code?

  ·         You did changes to the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: You try to perform the following troubleshooting steps and check if it helps:

  Check the State of the WMI service start-up

  1. click on start, type "services.msc" (without the quotes) in the search box and press ENTER.

  2. double-click on the service "Windows Management Infrastructure.

  3. make sure that the startup type was set to "Automatic" and the service status is "started", otherwise, if it please change start type and click on the Start button to activate this service.

  Method 3: If the problem persists, let us register the WMI components.

  Save the WMI components

  a. click the Start button, and then in the "Search" box, type CMD.

  b. in the list above, under 'Programs', then right-click on CMD which appears above and choose 'run as administrator' and click 'continue'.

  c. in the open window, type the following commands one by one and press enter after each command:

  CD /d %windir%\system32\wbem

  for %i in (*.dll) do RegSvr32 %I s

  for %i in (*.exe) do %i/regserver

  Note: The WMI Tester window may appear, it is normal, and we can move forward to close.

  d. restart the computer and check if you receive errors.

  Let us know if that helps.

• Fs9 not opening - identified problem but need help repair

  I want to thank you in advance for your time. I am trying to install and play flight sim 2004 on windows 7 - a x 64 sys - and when I open fs9.exe splash screen or anything really fails to display.

  I think that is the problem, is that there is no record of FS9, under the %appdata%\Windows\ that basically, I need help trying to solve. Is there anything I can download to replace this file? Or am I just looking in the wrong place.

  Also, I installed it in a different directory, not the directory Program Files (x 86) but rather just C:\FlightSim\

  Hi Jordan,.

  The game does not appear to be installed according to the description of your problem.

  I suggest you log in as administrator or right click on fs9.exe file and run as administrator.

  I think that this is precisely the reason why the FS9 folder does not appear in c:\users\explore \appdata\local\Microsoft\windows\game.

  If this does not work, I suggest that you look into other aspects as well. Follow the steps below.

  Method 1:

  Update display drivers . The flash on the screen could also be because the display drivers are not updated. I would recommend you visit the manufacturer, download and install the latest display drivers for windows 7.

  Method 2:

  I suggest to disable UAC and then try to install the game.

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

  Method 3:

  Temporarily disable all security software and try to install.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, then I suggest that you post the question in the Microsoft Flight Simulator Games Forum for further assistance.

  http://www.fsinsider.com/

  FOR INFO:

  Flight Simulator 2004: Known video issues
  http://support.Microsoft.com/kb/823628

  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Maintenance can not activate Photoshop CS3 key need help disabling.

  Our Organization has a photoshop CC3 2 pcs license. On a PC all installed and activated and that the license is not installed on the second PC, said that it is necessary to deactivate the license on the old computer, if there is no license. You must disable the license key on all of our Maintenance parts the cat cannot help.

  If you have a volume license then you will need to continue this through the volume license media.

  http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

  Volume License Activation number: https://forums.adobe.com/thread/1526938

  If it is a single-user license, you must go through the normal customer using cat.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• My first does not work... NEED HELP PLEASE!

  Hey!

  I really need help!

  I downloaded the cloud adobe creative pro adobe 2015 first cc and when I start it upward

  error "Adobe Premiere Pro could not find capable video game modules

  Please update your video display drivers and repeat"appears.

  
  

  I don't know what to do...

  
  

  my graphics card is the Strix OC ASUS GTX 970

  and my processor is the intel core i7 6700 K 4.0 Ghz

  
  

  I checked my graphics card drivers and they was up to date.

  I tried many things, but none of them works!

  My operating system is Windows 10 Pro 64-bit

  P.S adobe software all work in my computer perfectly fine... only the first dosen't work...

  
  

  hope you will reply quickly...

  It's important!

  Have a nice day ():
  

  try to disable linkscanner and shield online because they block adobe a reason any. You can also try adding exclusion lists.

• LabVIEW USB-6366 sample 2 AI and encoder value triggered with X 1-Encoder (not with the sample clock) - need help, please

  Hello world

  After 10 years of LabVIEW experience I'm totally lost.

  It's my first project with DAQmx and I do not know how to handle.

  My configuration: Windows7. LabVIEW 2012 DevSuite; X Series USB-6366

  My goal: trigger value encoder and 2 inputs analog

  I would get a result for the value of the encoder and each of the two analog inputs for each change of the value of the encoder (not more! I do not want to sort a huge amount of data afterwards)

  I was able to configure it with the measurement and Automation Explorer, but have no idea how to do that in a LabVIEW configuration.

  Read all of the examples I could find the analog inputs and the encoder with SampleClock. This isn't what I'm looking for.

  I would be very happy if someone could guide me to my solution.

  I have attached the confiuration exported from the measurement and Automation Explorer.

  Thanks in advance, best regards,.

  Balze

  P.S.: Sorry I got COMPRESS the *.nce file, because NEITHER allows you to attach files *.nce

  You'll get there, but yes, the first exhibition to DAQmx is probably a little overwhelming.  A few other tips based on your screenshot (I'm on LV2010 & can't open the code).

  1. "allow buffer overwrites" is that a functional but description is not text.  It lies under the Read DAQmx property node and must be configured before starting the task.  Here is an excerpt:

  

  2. it is usually (but not always) an available timing system to be used for all HAVE channels in a task just by the material.  As a result, all channels to HAVE should be included in a single task.   You can do this easily in chaining your call 'DAQmx create Virtual Channel' twice the job output and input/output error.  Because the second call will receive a task refnum as input, it will configure the 2nd channel of AI to be part of the same task.

  (It is possible to specify just several channels in a single call, but separate calls gives you the ability to configure different setting on the scale or range of entry).

  3. the 'random', which IA task gave you the error is due to the lack of sequencing in your attempts to start tasks.  The question which is the fortunate success that happens to run first can (and does) vary from run to run.  By combining the two channels to HAVE in a single task, this problem will disappear, but you want to be sure that the tasks of the AI and the counter are started * before * any clock signals come to PFI8.

  4. "change detection" will be available for digital input assignments, not tasks of meter.  And it is also generally supported only for a digital port a-bit value.  Other ports then that support data acq clocked by the software on demand.  I guess one of these questions is the source of your error.

  On the boards of the M series that I used, change detection has been supported only on port 0 - I think that the same thing will be true for the X-series cards.  The following took place without error for me using a simulated X series device.  By selecting another port gave an error.

  

• Hello, I was wondering why my adobe first pro ((when I try to open it)) say that "the application could not start correctly 0xc000007b" I need help as soon as POSSIBLE. Im trying to work on a film, but I can't until I have correct this problem. Help?

  Hello. I need help as soon as POSSIBLE, when click on my first adobe, it says "the application is unable to start correctly 0xc000007b" I need major help as soon as POSSIBLE - does anyone know how to solve this?

  ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

• Need help with a Windows update it please...

  03/15/13, we had a storm, and when well even I had a surge protector for a reason, he put my date one (1) year until 15/03/14 which I didn't notice at the time, so when I started my pc, he had a update installtion, which was the following: good security for Windows Vista (KB2807986) update less say , my pc was a bit confusing, because until what I changed the actual date in the BIOS?  She had always installed this update for 2014, so my pc and the browsers would not work correctly until I changed the date.  But in the meantime, the correct installation of the certain this update was never made...  So, I need help on what to do.  How to remove this update? Or should I leave and just manually install the update correct?  According to what it is, I need help on how to do it and where to find the correct update?  Can someone help me please?  and thank you!  I have Windows Vista Ultimate 2007 ServicePack2 32bitOS

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. what exactly is the problem that you are facing as a result of this update?
  2. do you get an error message?
   
  I suggest you to install this update manually and check:
  Reference:
  Update security for Windows Vista (KB2807986)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=36915
   
  See also:
  Remove an update
  http://Windows.Microsoft.com/is-is/Windows-Vista/remove-an-update
   
  I hope this helps.

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• Debugging - need help with configuration

  I also posted this in advanced by accident...

  I need help to my local development for CFBuilder debugging machine configuration. Developing CF applications is configured correctly, but I have problems configuring settings for debugging for CFBuilder/Eclipse. CFBuilder is installed and connected to RDS, and CF administrator is configured to debug level line. I'm running Windows 7 x 64 with ColdFusion 9 (using IIS).

  All my projects are in my "C:\Dev" folder, and each project contains a folder "www", which is the root of the web project. So, I have my projects organized like this:

  C:\Dev

  TestSite

  design

  docs

  www <-web root folder

  , I have created a ColdFusion project and he mapped directly to the folder root 'www '. In IIS, the web root folder is mapped via a virtual directory under the web site default and is accessible from "http://127.0.0.1/testsite"" "

  I have configured my RDS server that works correctly, so I can see the databases on the server. Nice. I also set up a server in the list of servers in the perspective of coldfusion and imported directly from my RDS server settings. It has the same name as my RDS Server, which is 'Server RDS Local.' I also added a URL prefix for "testsite" which is mapped to the local path: (C:\Dev\TestSite\www) and "http://127.0.0.1 \testsite. And finally, in Debug maps (preferences window), I said 'Server RDS Local.'

  Everything seems to be installed, but I can not debug. Here's what happens:

  Of the ColdFusion perspective, I click with the right button on index.cfm and select "Debug-> ColdFusion Application" the first time I do it, it switches on the ColdFusion debugging Perspective and loads of " " http://Homepage/ 'and then nothing seems to work. On the debugging tab, it shows me that he has created a new launch for my project as follows:

  TestSite

  Local RDS Server

  Model of ColdFusion

  I see my breakpoint in my breakpoints tab. But I can't seem to get any further. I can't find a way to run at my breakpoint. The home page for the current debugging session is "http://homepage/" which is something I don't understand. How CFBuilder go to the correct home page for the debug session? Maybe that's the key of.

  Hello

  Please right click on the project, and you will see an option "set the URL prefix. Allows to set the URL of your project.

  Thank you!

  Bhakti

• I need help for configuring security for my wireless again.

  Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.

  original title: Wi - Fi Protected Access

  Hi dmcangus,

  See the Microsoft articles below for more information on WPA wireless security.

  Configure Security Wireless WPA for home networks

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security

  Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP

  http://support.Microsoft.com/kb/815485

• RE: router wrt310n - need help for configuring wireless security

  I can get wireless if the router is not secure, but cannot configure wpa and wireless security.  Instructions followed on linksys tutorial but still connect wirelessly if I select wpa security.   In addition, I can't find a way to change the ssid, the pages of router do not match documentation.  The version of my router is v1.  Is this obsolete, I know that there is a v2.  Any help will be appreciated.

  Please follow these steps to configure the wireless settings and try to connect to the wireless network.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  IF YOU ARE NOT ABLE TO CONNECT TO THE RADIO

• I can't delete the properties of the proxy server on my HP G60 Windows Vista laptop. Need help to access my wireless router.

  I'd appreciate any help or information that may help me set my Internet Options on my IE LAN settings. The configuration that I need to adjust consists of set the network settings on Auto instead of the designated inputs.

  Hi JoseGarza,

  You can follow these links to configure the wireless router & check if it helps.

  Set up a wireless router

  Setting up a wireless network

  Hope the helps of information.
  Please post back and we do know.

• Need help with as2 as3 conversion. Please, I beg you.

  Could someone help me to convert as2 as3, please?

  Source code:

  _root.magnet = 500;
  _root.magic = 10;

  and

  onClipEvent (load)
  {
      homex = this._x;
      homey = this._y;
      forcex = 1;
      forcey = 1;
  }
  onClipEvent (enterFrame)
  {
      x0 = this._x;
      y0 = this._y;
      x1 = this._xmouse;
      y1 = this._ymouse;
      distancex = x1 - x0;
      distancey = y1 - y0;
      distance = Math.sqrt(distancex * distancex + distancey * distancey);
      powerx = this._x - distancex / distance * _root.magnet / distance;
      powery = this._y - distancey / distance * _root.magnet / distance;
      forcex = (forcex + (homex - x0) / 2) / _root.magic;
      forcey = (forcey + (homey - y0) / 2) / _root.magic;
      this._x = powerx + forcex;
      this._y = powery + forcey;
  }

  I am a newbie in flash so if anyone can help with this would be great.

  I really need to be done please help me.

  MovieClip(root).magnet = 500;MovieClip(root).magic = 10;
  

  and

  var homex:Number = yourmc.x;var homey:Number = yourmc.y;var forcex:Number = 1;var forcey:Number = 1;
  
  yourmc.addEventListener(Event.ENTER_FRAME, loopF);
  
  function loopF(e:Event){    var x0:Number = e.currentTarget.x;    var y0:Number = e.currentTarget.y;    var x1:Number = e.currentTarget.mouseX;    var y1:Number = e.currentTarget.mouseY;    var distancex:Number = x1 - x0;    var distancey:Number = y1 - y0;    var distance:Number = Math.sqrt(distancex * distancex + distancey * distancey);    var powerx:Number = e.currentTarget.x - distancex / distance * MovieClip(root).magnet/distance;    var powery:Number = e.currentTarget.y - distancey / distance * MovieClip(root).magnet/distance;    forcex = (forcex + (homex - x0) / 2) /MovieClip(root).magic;    forcey = (forcey + (homey - y0) / 2) / MovieClip(root).magic;    e.currentTarget.x = powerx + forcex;    e.currentTarget.y = powery + forcey;}