Re: Satellite A505-S6040 - strange problem after installation of the NVIDIA driver

Similar Questions

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.

• Strange problem after moving from the virtual computer to a new data store

  I am migrating our VM existing (8 in total) a 'problem' RAID to a new table on a new controller and am having a strange problem. Here are the steps I took (host OS is Ubuntu 8.0.4 LTS x 64):

  (1) off the power the virtual computer from the Web interface

  (2) the directories created for each virtual on the new RAID array computer (in this case a RAID 10 array on LSI 9750-8i controller)

  (3) rSync used to copy the data from RAID1 to be RAID2

  4) has created a new data store on the new RAID through the Web Server of VMWare user interface.

  (5) removed VM of the inventory through the Web, their return, added user interface then choose files .vmx on new data store on RAID2

  They have all power save fine... but three of them are not accessible on the network. I can open a console in the Web Server of VMWare user interface and they all run normally... but I can't their ping or access the respective virtual machine Web GUI. It seems quite arbitrary that those who work and those who are not. In this case... the VM that don't work is a license Autodesk, a Squid proxy server and a VM of cactus. All three of these virtual machines are 32-bit Ubuntu Server VM (two 8.0.4 and a 10.0.4)... and are the only Ubuntu VM on this host. It must be signifigant but I'm not see how.

  If I delete these three virtual machines of the inventory again and add to their original location (on the RAID1) they light up AND work normally. A consultant that we were working seemed surprised, as he had also done this experiment with some of the older VMWare products. I don't see how it would be the physical location of the files of the virtual machine. Any ideas?

  We rely on the migration to ESXi soon but in the meantime, we get these a few VM out of this RAID array problem. I'm stuck.

  Depending on the application, it may be enough to reconfigure the IP parameters (they are very probably on DHCP now) for the newly detected virtual NIC.

  André

• Problem after installation of the uniblue registry booster

  After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?

  Hello

  Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
  UnIBlue support for uninstallation methods.

  ----------------

  Then use the system restore BEFORE you uninstalled UniBlue which will ensure
  None of this is left in effect on the system.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

• Glitch screen after installation of the graphics driver on HP G60-120US laptop.

  I recently did a clean install of Windows 7 Ultimate on this laptop, and I have downloaded all the drivers provided on the site.

  After installing the video driver a more specific sp45230.exe, I couldn't help but notice that the screen is subsequently very temperamental and he flashes so often, causing green to appear lines and occasionally causes of segments of the screen to move to the left for a fraction of a second.

  While it is certainly a notch above have generic drivers for a new installation of Windows, can someone point to me where I can find another solution for this screen, or maybe a new driver? Any help would be appreciated. c:

  Confirmed: After 2 months, no one is able to solve this problem. Congratulations, HP. You have lost a customer.

  Lock request.

• Equium A60 keeps restarting after installation of the graphics driver ATI

  I have installed the Toshiba ATI graphic driver, but when I restart the laptop, it does not start, keeps restarting before surposed to go on windows XP. Help, please.

  Hello

  Try please solve it as described on this Microsoft article http://support.microsoft.com/?kbid=293078

  Generally, the display driver installation should help. As you know sometimes it is not easy to fix this kind of problem and sometimes is much better recovery procedure.

  You can not write about any common problem if you n t know exactly why this happens. If you are recovering the unit it will be working well. A negative influence on the graphic can have some games preinstalled or many other additional software.

• Problem after installation of the plugin 1.3 for eclipse

  Hello

  I have windows XP and I had the Eclipse Helios installed before.

  I downloaded the new Plugin of Blackberry for Eclipce and (after a looot of tests), it has been has been properly installed, BUT when I opened there was NO BLACKBERRY FEATURES.

  I mean, no Blackberry in the top menu bar, no "new Blackberry project", etc.

  I looked for a solution in the forum, I found people who had the same problem with windows 7, but the solution did not work for me and I found people who have had this problem with XP with no. SOLUTION.

  I need to start working immediately.

  Help, please

  My mistake: i had not the Java JDK 6 in my PC...

  Now it s working

• Log on problem after installation of the sp3

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  I installed the latest java, W. Media Player. I had a browse through updates and he said that auto updates can not be read if my system is up to date. So I thought that I should install SP3. Once this is done I did the reboot and start-up of the machine re I got the newspaper of the administrator on request of password. When I bought this machine and it works, he never requested a password and went directly to the screen, probably because it was only a single account. the seller told me that he had installed a hard drive cool and a new copy of XP pro. There is a sticker on the back of the machine activation key.

  I tried many combinations of passwords, including the sellers name, leave blank and just pressing ENTER. tried Ctrl alt del all resulted in nothing.

  I contacted the seller and he said that he never put a password and therefore cannot (or will not help) I looked on the web for some ideas, including starting in safe mode, but the info it says it will ask for a password, but I am. I am now locked out of my machine. Help, please. Thank you

  On Monday, April 7, 2014 21:12:58 + 0000, DeanChaytor wrote:

  On Monday, April 7, 2014 20:29:13 + 0000, DeanChaytor wrote:

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you
  do not reinstall Windows properly.

  Thanks for the reply.

  You are welcome. Happy to help you.

  To do a clean install, what I have to buy a new version or I can just a xp pro disc and reuse the key at the back of the machine, provided that they are ok.

  If you have a product key on a sticker, it's an OEM version. You can
  use the disc to a friend, if the sound is also OEM. Try to find a friend with the
  same brand of computer.

• W530 problem of Installation of the Nvidia K1000M driver

  I have a Thinkpad w530 and us reimage our machines with a standard image for us, so I usually have to make these drivers from scratch. On some of these with optimus, I installed the drivers from the Web site but get a standard vga adapter with an exclamation point and are unable to install. also tried the one from nvidia. Any thoughts? Is there other software that I have to install before hand to make this work or a configuration windows can I change? I am using windows 7 64 bit with 24 GB of RAM.

  So, I finally had this resolved after many unsuccessful attempts. Seems that I had to use version 335. xx and the installation itself has failed, I did an update driver for the component and have already told him to use the one in the folder. This eventually settle and work properly. Now I can use my external monitors. Thanks for all the help and suggestions at all.

• Impossible to find after installation of the bluetooth driver

  I have inspiron laptop n5050 with installed windows8 and I updated all drivers support and bluetooth, I have installed DELL WLAN AND BLUETOOTH CUSTOMER ver9 after call to customer support. but I can't find bluetooth in my computer and have no wireless bluetooth option in my pc settings.plz help...

  Hi viveksan3,

  After the screenshot of the device manager that you have posted, it seems that your system was shipped with Dell 1502 wireless 802.11b/g/n wireless card. It is a stand-alone wireless card and is not compatible Bluetooth. Please let us know if you were able to connect to Bluetooth devices before upgrading to Windows 8.  In addition, please share if you were using any external Bluetooth adapter/dongle to connect.

  Please respond with the information. I'd be happy to help.

• Portege R100 crashes after installation of the graphics driver Vista

  Hello world.

  I tried to put Vista on my R100 and surprisingly that everything works well. However, the only thing that's not the driver graphic. He moved very well and watch as signed but the machine hangs all the time when using the driver.

  When you use the standard vga driver in windows, all right, but obviously you can not watch movies or whatever it is coz of the pilot garbage.

  any ideas people?

  Thank you

  Rob

  Hello

  I put t know where you found the driver for Portege M100 Vista because I just checked the page of the Toshiba Vista driver and did not find the graphics drivers for Vista!

  AFAIK the R100 uses a Trident XP4m32 with 32 MB of video memory graphics card.
  You search for vista for this graphics card driver or you will use the standard graphic driver.
  In my opinion, you should be a happy man because you were able to install Vista on your laptop and it works with the standard graphics driver.
  As much as I know this laptop is not vista capable and I don t think you will be able to use it with a maximum return.

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• Strange problem with measurement of the color under Mac.

  Hello, I have a strange problem with measurement of the color under Mac. For example I create a gradient in Photoshop color 200 200 200 color 240 240 240. When I measure the color of the gradient with the Photoshop color measurement tool or with the built in OS X color measurement tool measured color is of 200 199 197 to 240 240 238. I measured the same gradient with Photoshop for PC and the values are OK (the same values that I create).

  I don't know what the problem is, but I think that the colors that I create are the same I have measure after creating them and also values between Mac and PC. I appreciate much help or information you could give me that helps me understand what is happening here.

  Thank you for your time

  Marcelo.

  Yep, you guessed it, evidence as monitor basically removes all profiling and just offer it right.

  is it possible to make the OS X color measurement tool to measure the original color values

  You mean the colors of paper - No., as I said photoshop filter your image through the profile document, proof of installation and the monitor profile. Why use Digital color meter for this though?

  I don't understand what is measurement of color values that will change every time point calibrate it my monitor.

  Because color values are "larger" what is on your monitor. Your monitor (via photoshop) makes only the best he can to display these values, which can be anything from LAB colors outside the range of your monitor - to the CMYK color. Calibration, it is the only way to allow your monitor to do this in any way accurately. (never really impossible) The monitors have a certain range and are only representations / would the REAL colors who is the holder of a document, with a profile. There's only one good reason to measure the monitor values so that is to build a monitor profile.

• Satellite Pro C70 - B - 12 c - installation of the Package of added value

  Hello technician,

  could someone explain how to install the PPV on the Satellite Pro C70 - B - 12 c.
  I installed Windows 7 on the new Machine and want to use the utility function key.

  I downloaded the compatible vap on the driver download site. In the next step, I tried to install the PPV on the Archive of Toshiba Extractor. If I let install it automatically, I m only get the ODBC Driver-Installation Windows. So I canceled the Installation of the ODBC driver - and start the program installation of archive extracted.

  After the complete Installation, the function keys and the utility of the Flash card can be used. But the Flash card utility displays badly on the assigned keys functions. for example, on the keyboard the F11 key shows the power of the speaker function.

  The Flash Card utility indicates the Escape key for the same function switch (speaker). After the Installation of the vap, none called buttons work.

  I ve tested the function Key Utility for Windows 8.1. But this test was unnecessary.

  Thank you very much for your help!

  Hello

  Installation of VAP is not very complicated.
  You need to download the package.
  Save it to the disk (to office) and unzip the package (right click on unzip)

  > In the next step, I tried to install the PPV on the Archive of Toshiba Extractor.
  I m just wondering what you mean by install over?

  As I said earlier, after a clean install of Windows 7, you could install the VAP. But first this package must be decompressed. To decompress the package, you can use a program like WinRAR or WinZip