Re: Satellite A80-135 - during recovery, that it stops working after 10 minutes
After trying to reinstall Windows from original restore DVD my A80 stop working after 10 minutes of this.
I tried again several times and the problem is the same. Cannot complete the installation, because is shut down every time after 10 minutes or more.
Do you have any ideea why this phenomenon happens?
Thank you!
Hello
You should check if the same issue occurs with another disc maybe you could try to reinstall the OS by using the original CD of Microsoft Windows.
If installation still decomposes at the same point and time then this could be related to a recovery disk scratched.
On the other hand the laptop could shuts down due to hardware problem.
As mentioned by Luke, the internal HARD disk bad might work too.
Overheating could be another reason why the laptop is off.
Maybe don t cooling modules work as it should and puts it in internal temperature high power off the laptop.
But these are that some suggestions so it would be really interesting to know if you can reinstall the OS using another disc
Tags: Toshiba
Similar Questions
-
Satellite Pro A210 - keyboard and touchpad stop working after hibernation
I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.
Anyone have any ideas?
Hello
You have installed all the drivers for your laptop? I mean especially the chipset driver.
Check this box!If you have yellow exclamation points in Device Manager, you must install all the missing drivers.
Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.
Sorry, but that's all I can say at the moment
-
Satellite A80 135 impossible to reinstall the operating system using the recovery disk
Hello
Ive got a laptop 2005 Satellite a80-135 that worked very well until I tried to format the HDD after a performance of Ram boost operation (kingston 1 gb Ram module).
Just after that, the computer started showing software problems and finally crashed;
So I decided to reinstall the entire operating system yet. and here, I found the problem I really hope you can help meThe thing is that I can't format my hard drive to my cd player (with recovery CD in) when the machine is restarted.
In theory, start the Panel menu should appear after the computer reboot with the C key simountaneously key but nothing happens.Thanks in advance
concerning
jozzeHello
Simply, the C button the STRANGE start.
You can also try to press F12 after the laptop has been powered.
Then the start menu should appear on the screen and then you could choose the ODD (optical disc) in order to boot from the CD.If this is not possible, the question is perhaps related to WEIRD malfunction or recovery disk.
Maybe the CD/DVD drive cannot read the disc properly and so the laptop can not boot from the disc.
You can try to copy the recovery CD using another computer and might try to start using the copied CD.
If it does not the problem might be related to the WEIRD failure. -
Satellite A80-135 PSA80: after updating Bios keyboard will not
SATELLITE A80 - 135 MS (MS is for Spanish)?
model PSA80E-04C00JSP
SER 55XXXXXXKWindows xp sp3 Spanish
-> Update of the riginal 1.5_ bios (bios ID EAT10 / EAT20 bios version: v1.50)
for _v 2.8_Downloaded bios - 20070709170816.zip of the Spain of toshiba
http://es.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=esUnzipped the file and found an excutable "windows installation" and "AT10280a.rom".
Double-click on the installer and....... Now the keyboard is used for nothing (strange signs instead of letters)
During the update (windows xp) I think I saw something on a master (original rom backup) in c:/windows/temp
but now I can't find the backup rom.Can anyone help?
Would it be possible to 'downgrade' to the bios (1.5) original and if so... where can I find it?Thank you
Hello
I don t know why it happened after updating the BIOS, but I guess that the language of the keyboard settings are not correct.
Go to Control Panel-> Regional Options & language-> language (second tab)-> Details
Here, you must choose the right keyboard (Spanish) language?
Good bye
-
Satellite A80-135 and the hard drive upgrade
Hello, I saw a dealer offed: Trekstore 500 GB HDD at 7200 RPM ide, he could work on my laptop Satellite A80-135?
Thanks in advance.I m not 100% sure, but I think this old Satellite phone has old HDD with IDE bus master, so it can be upgraded up to 120 GB only.
-
Satellite A80 - 154 - keyboard and Touchpad are not working
Hello
I bought a Toshiba Satellite A80 154
The keyboard doesn t work.
I see the light, but no key worked. The same thing with the touchpad.
I can t go into Bios.When I plug a keyboard and USB mouse in works fine.
I am looking for a new Ebay. The best offers $ 24 + $ 6!I see in the Windows, the keyboard and the touchpad with one!
I put t know what the problem is, but it's not a prob of Windows.
It doesn t work either in Bios.Thank you for the help
Hello
It looks like a hardware problem.
If the warranty is valid, you can contact the ASP in your country for a verification of the material.If the warranty is not valid, you can first check if the keyboard cable is properly connected to the motherboard.
If it s properly connected then a keyboard failure is possible and it would be wise to check if a replacement would help solve this problem.Compatible parts can be ordered also from the ASP in your country.
-
WIN8 64bits - Recovery manager has stopped working error message
Hello world. Just bought a computer laptop 1310sa m6 with envy. I tried to create a rescue disk set by using the Recovery Manager. It does not start, just gives the error message "Recovery Manager has stopped working." and then informs me that windows is collecting information and inform me a solution... Being that this machine is only 2 days is a bit much that parties do not work, in my opinion, one most important parts who! Has anyone encountered this and y at - it a solution?
I tried to do a shadow with an O & O 7 disc image, works fine, but could not create a boot disk for a reason any (and Yes, I was using a 64-bit program!)
Any help and advice would be accepted with gratitude
JUST found the solution! DON'T bother with the HP Utility App Center. Go to search and type 'recover' and it will give you the option to create rescue disks... And it worked on my computer without any error message
-
Satellite Pro A200 - Webcam stop working after 10 to 15 minutes
Hello
I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.
Please send me some suggentions how to solve this problem.
Thank you [email protected]
Hello
How did you notice this problem? You get an error message or something else?
It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversInstall the latest version and try again.
By the way: you run factory settings or you have installed your own version of Windows?
Welcome them
-
Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10
The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).
How did solve you this?
-
Touchpad does not work after 2 Minutes - Satellite M40
Hello world!
I have a big problem with my M40. After sending to the Service Repair youcef, my Touchpad stops working after about 2 Minutes. I downloaded several drivers for it and everyone has worked for a few Minutes, but after a reboot the Touchpad stoped working after a few seconds or the pointer moves wrong and opens a windows loading.
Any suggestions on how I could solve this problem?
Thank you
M.Hello
Can you please tell us why the unit was repaired and what has been exchanged? If you have some problems after repair, please communicate with the technicians as soon as possible. They must guarantee for the operation of the equipment.
If you want to check only I put t think the best idea is to install several drivers because this device has a driver for each component material. The best thing you can do is to use recovery media. On this way, you will have to factory settings. In this case, everything should work fine again (if the hardware components are not defective).
Good bye
-
Satellite L350 - pad stopped working after BIOS update
Hello
The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).
Any ideas?
Concerning
The value of the default BIOS and test it again.
NUMLOCK button works (LED on / off)? -
One of my programs, observation of the BSE market stopped working after I got updates for my Windows XP today (03/07/2010). BSE is the Bombay Stock Exchange and I got BSE mKT Watch free program from the Bombay Stock exchange website and it is very important to me.
Uninstall the updates that you have obtained on 03/07/2010 and see if that solve the problem. If so, then install updates one at a time to see what update stopped the program run.
If on the other hand, the program is still defective, then this is perhaps a problem with the program itself.
Please investigate the above and post back with the name of the update or if, in fact, it is the program that was the cause of the problem. TaurArian [MVP] 2005-2010 - Update Services
-
* Original title: software problems
Whenever I open my Kodak easy software, that he told me that he stopped working and no solution to the problem. How can I fix this?
To allow a person to better help you, can you provide more information please.
for example:
- What is the full name of the 'software kodak easy' AND its version number?
- Is it intended to be run on this version of Windows 7, or if it was originally intended for an earlier version of windows?
- What is the exact error message when it does not work?
- He has already worked on this computer? If so, when did it stop working?
If it is your program - http://support.en.kodak.com/app/answers/detail/a_id/36670/selected/true - it seems that it is no longer available for Windows.
If you have a 64 bit OS, it can help - http://support.en.kodak.com/app/answers/detail/a_id/30535/~/easyshare-software-on-64-bit-computer-running-a-windows-7-or-windows-vista/selected/true
If it ran on an earlier version of Windows, but will not work on Windows 7, try running mode of compatibility - http://www.sevenforums.com/tutorials/316-compatibility-mode.html - which may allow some older programs to run on a later version of the operating system.
-
Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program
Hello... Adobe, you have a phone number I can call to talk about this?
Why don't answer you my survey?
-
Hello, I have re-subscribed to my CC license after that it stops. After 24 hours, it still does not. Is it possible to repair it quickly?
Hi Mathieu,
I canceled your last order and launched the same refund.
More details have been sent to you.
Kind regards
Gurpreet
Maybe you are looking for
-
Still having problems with Itunes after music updated to iOS 9.3.2
How can I solve the problems created by the software update Apple iOS 9.3.2 lost all my music will not restore using itunes etc
-
Firefox gmail cannot have attachments. Icon does not respond. Why?
I send my job as an email with the word document attached. Trombone poster icon "send a file" when I executed the cursor on it, but don't respond when I clock top to start the process of attaching a file.It's also show as icon lightly colored when ot
-
So why is my cable Iphone 5s collapse?
So I have about a year and a half my lightning brand junk apple cable began to collapse at both ends on the phone to my wife and me. Unfortunately the damage became much worse even after I tried to fix the cable with the CHATTERTON. Cables have vir
-
I uninstalled Norton Security internet - how do I get it back
Hello I uninstalled the Norton Internet Security software, want to now it backwards, but seems not to have it on the recovery CD. Can anyone help please? Thank you.
-
Re: Satellite L450D - blue screen during installation of Windows XP
Hi, laptop just out of warranty and the HARD drive was crushed, no return allowed ups recovery so don't not on the new HARD drive installation. I installed the new HARD drive and began to install XP. Implementation of process gets to the point where