Satellite Pro A210 - keyboard and touchpad stop working after hibernation

Similar Questions

• Satellite Pro L300 - keyboard and touchpad issues

  Hello

  I just baught my GF a PC Toshiba laptop refurbed for his 21st birthday from a reliable source, it's a Satellite Pro L300.

  I started it until all the setup stuff, me there only to find that the keyboard and the touchpad work not AT ALL.
  The keyboard caps lock key is not even lights up when I press it.
  I downloaded all the latest drivers for EVERYTHING Inc. the touchpad, it makes no difference.

  I'm quickly running out of ideas and come to accept the fact that the keyboard and the touchpad is maybe defective and therefore evil must give my GF a defective laptop for Denise 21st, not happy :(

  Any1 have any ideas?

  Thanks :)

  Edit: OK, OK very strange, after that I sent this message, I tried the keyboard once more and it works fine?
  Could this be something 2 do with the download of the VFR package?

  The touchpad is always tired, even when I try the fn + f9 combo?

  2nd edition: Ok now the keyboard stopped working again!

  ON EARTH!

  Hello

  Looks like a keyboard problem. who knows why it doesn t work looks like something would be wrong
  I recommend you visit your dealer and replacement request
  Otherwise, you may contact the ASP in your country for a fix

  I think it's everything you could do

  Good luck

• Satellite 5200 802: keyboard and touchpad not working

  Hello world.

  I was hoping that someone could help me with a problem I have with my 5200-802 Satellite. The keyboard not work DVRs, although it shows in Device Manager and report it as works fine. I updated the BIOS and tried a bunch other things basic suggestions would be greatly appreciated.

  It may be useful to mention that I also can't my touchpad driver to register.

  Thank you very much.

  Hello

  Do you have an error message, or have you signs of bed on the screen?
  You can use the keyboard to access the BIOS?
  If yes then the keyboard has been recognized and works!

  If you can not use the keyboard running OS then I recommend to remove the keyboard device in Device Manager and restart the laptop.
  The keyboard should be recognized again after new OS reboot.

  But I think that you will not be able to access the BIOS.
  Due to the fact that the touchpad works too, I imagine that the hardware is defective or there is no connection with the motherboard. Maybe a lose cable

  Maybe you should check this. But note; If you have no experience with laptop technicians. Good bye

• Touchpad stops working after hibernation on Satellite M40

  My laptop M40 has just started having a problem with the Touchpad is, after hibernation the touchpad does not work. plug an external mouse works, I tried to disable and re activation via the control panel but it doesn't help. Switch off and then again on fact fis the Thinkpad, someone has seen this before?

  You said that this problem started now. It seems therefore that this issue was not present in the past. Am I wrong?
  So, if I m right then it looks more like a problem of software like a hardware problem.

  Usually, the first step should be a new touchpad driver installation. Then you might try to update the Windows XP operating system to the last State. You must use the Microsoft Update page to get all the fixes.

  Then download and install the tool called CCleaner. Its free and it s very useful to clean the operating system and the registry.

  If this is not enough, try to reinstall the OS from the recovery CD and test if this problem persists after installing new OS.

• Microsoft USB wireless keyboard and mouse stopped working after I bought another identical to another laptop that is 2 meters from the hotel

  I bought another keyboard Microsoft Wireless Comfort Keyboard and Mouse 5000 for my partner as he just got a new laptop.  I liked my as the original and has therefore whoever we decided to buy exactly the same package.  The only problem is, as I plugged my partners, my mouse and keyboard do not work.  I've tried new batteries and I tried to use the usb, but nothing works and there is no reset button on the mouse or the keyboard (that I can see anyway).

  I'm desperate to get it working.  Any suggestions please?

  Thank you

  Hello

  See the keyboard or mouse manual to locate the reset button to zero, to assistance that may help you resolve this problem.

  If you are unable to locate the reset button then, I would say to contact hardware support team.
  http://www.Microsoft.com/hardware/en-us/support

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• Satellite A300-243 - keyboard and touchpad has stopped working

  Hello everyone

  I have a serious problem in my Satellite A300-243. I installed a driver for external keyboard using a CD and once I rebooted both keyboard and touchbpad stopped working and to make any order, when I reached the vista welcome page.
  What should I do because you know that even if I can't get into the windows to uninstall this driver.

  Any way to do during windows startup?

  Hello

  Why you installed a driver for external keyboard? I've never heard of such drivers

  Anyway, you should try to start in safe mode and then you are able to remove driver external keyboard to the list of software. After I restarted in normal mode, the keyboard and the touchpad should work properly again.

• Satellite A300-1AL - keyboard and touchpad issues after change of OS

  Hello

  I'm looking for suggestions or ideas how to deal with the problem of keyboard and the touchpad, which occurred just after I installed the new operating system. I changed from Windows Vista to Windows 7 and my keyboard and touchpad become inactive after a few minutes of starting the system. It is not serious if I write something or not, the unit works for a short time, then turn off automatically. I tried to find updates the driver but failed to come through what might be the solution. It is difficult to work with the screen keyboard so I hope that you will be able to help me.

  Thank you in advance,
  perkit

  I have Satellite A300-1LI and I installed clean Win7 32-bit using the Microsoft installation disc and all devices are working properly including the keyboard and the touchpad.

  Have you installed Win7 upgrade or clean the Win7 version?
  Have you used Microsoft installation CD?
  In General, keyboard and touchpad must work without any additional driver.

• "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.

  All other non - CC Adobe video editing programs work.

  Help, please. Thank you.

  Dennis,

  Changing the video rendering engine should have solved the problem. Is it still pending?

  Thank you

  Regalo

• Satellite L500D PSLT6A - FN keys and touchpad stopped working

  I have a Satellite L500D, model PSLT6A-015003, windows 7 (32 bit) notebook and the keys FN and the touchpad stopped working.

  I downloaded from download of Toshiba, the touch pad and the FN key downloads page, but nothing works.

  Can someone tell me please how to get this working again, even if it's only the touchpad.

  Flash cards are controlled by the utility of Flash cards and this utility is part of the Toshiba value added package. If this package is installed on your machine it remove the system, restart your computer and install the latest version of the Toshiba download page.

  Please also follow option:
  Open the settings of flash cards and set the option to allow the mouse to make the maps and test if it works.

  Please check the touch pad properties. Check if the touchpad is properly listed and enabled in the device (mouse and other pointing devices) Manager.

  Second thing you must check is the control panel > mouse > device (last tab) settings. Make sure that the Synaptics touchpad is listed here and it is not disabled.
  As last step make sure touchpad is not disabled with the combination of FN keys (if possible).

• Satellite A300 - 1 5: keyboard and touchpad not working

  I have problem with keyboard and touchpad. Laptop satellite A300 - 1 5

  I have Vista home premium and when I turn on the computer, I put password in the user box then my keyboard and the touchpad do not work.

  In the Bios my keyboard work but when Vista starts it doesn't have.

  How to solve this problem?

  Thank you!

  Hello

  First of all, please check the status of the device in Device Manager.
  Please check if the keyboard and touchpad are listed correctly without any yellow exclamation point.

  But you should try to reinstall the drivers again, even if the keyboard and the touchpad have been recognized correctly.
  In this case I recommend to remove the keyboard and the touchpad Device Manager, and then you must restart the computer once more.

  After Vista has restarted the two devices should be recognized again and should work.

  Please check this!

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.

• Satellite Pro L870 - Touch-pad suddenly stopped working

  Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
  These things are not normally suddenly?

  Why device manager says that there is no problem when there is a very clear?

  Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

• ProBook 4740 s: laptop keyboard and touchpad not working not

  Yesterday, I turned off my laptop, the next day when I turned on the laptop keyboard and touchpad did not work. When I am pressing a button about 20 times, then sometimes it works as a press. Yesterday, everything was working fine until I turned off.

  I tried 2 keyboards of laptop and always the same.

  I'm looking for help.

  I solved the problem by formatting the disc then installation system

• Pavilion DM1-4000sd keyboard and touchpad not working not

  Hello

  I'm back from holiday yesterday and when I tried to power on my laptop that he had to go through the windows recovery. Normally this wouldn't be a problem, but it seems the keyboard and touchpad are not working in windows or recovery recovery screens / normal boot selection screen. Also I can not access my bios (not), so this is most likely related to the same problem.

  The laptop was working fine before and I've never had any keyboard / touchpad editions.

  What can I do to fix this?

  Problem solved, plugged a mouse usb and it worked in the recovery menu. Still confused but on how I'll never get into the bios...