Re: Satellite L550-113 - cursor jumps on the Page

Similar Questions

• Why my cursor jump around the page when I type

  When I type on Word or an e-mail my cursor jumps around the Aalst page all the time. This could be the cause?

  Hi Phil,

  1. what kind of mouse do you use? Wired or wireless?
  2. is it a laptop or desktop?
  3 when was the last time it was working fine?

  I suggest that you check if the mouse settings are correct.

  You can read the following article and check.

  Change the settings of the mouse

  Method 2:

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Adjusting Brightness and contrast on the Satellite L550-113

  I am a user with low vision and I think buy the Satellite L550-113, but before I do that I need to be sure that the adjustable screen brightness/contrast very easily, preferably through the orders of material as opposed to via the control panel. I also need to make sure that we can do (i.e. too dull for a non-disabled user) rather dull screen.

  Could someone give advice on how to adjust the screen contrast and brightness on Toshiba L550-113? In addition, the screen has a glossy or matte finish?

  General information about the quality and ease of use of the screen will be very useful and much appreciated! Thank you.

  Hi mate!

  Yes, the brightness of the screen can easily adjust via the FN keys. You have to press FN + F7 to increase the screen brightness and FN + F6 to decrease the brightness of the screen. In addition, in Vista power management you can also adjust the brightness of the screen and save settings for profiles of different powers and block or power mode.

  AFAIK Satellite L550 has a brightness screen like any other portable satellite.

  I hope I could help a bit! :)

• Satellite L550-113 shows PXE-61 Media Test Failure

  Hi - 1st poster time so apologies if this is correct.

  I have the satellite L550-113, which is just coming up to 12mth old - bought the comet.
  error "pxe - e61 media test check the cable of failure" message whenever I start the laptop but deals with work as usual.
  These days sometimes goes in a loop with the beginning of message and the custom of error until you turn off / on again.

  I take Comet or contact toshiba?
  is this a common problem?
  is this a simple fix?

  THX

  I recommend you contact Toshiba. Addresses or phone numbers, you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• NB200 - cursor jumps around the screen while typing

  Hello

  When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

  So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

  Any help or ideas greatly appreciated!
  Thesis writing will be more months if the problem persists! :)

  John

  Here is the solution I've used and displayed a few threads down...

  Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

  You will suffer is not since the Cursur jump you met more...

  HTH,

  The f

• Cursor jumps across the screen.

  While trying to navigate around my screen with my mousepad to laptop, the cursor jumps randomly offline.

  • ex: when you try to click on the scroll bar (on a Web page) at the bottom of the page, the cursor jumps to the top of the page.
  • ex: on the desktop, I'll move the cursor over an icon, and the cursor will move to a random point on the screen and continue to move in the direction my finger, said that on a new path.
  • Sometimes, the slider works very well.
  • The problem occurs when you use any program.
  • I don't have the problem "while typing, my mouse moves and clicks on".
  • The movement is just a quick jump from point a to point b. (not rapidly moving around screen clicking everything)
  • If you need more info leave me a message.

  Specifications of the computer:

  -Laptop computer Dell: Latitude D620

  -Race: Service of Windows Xp Professional Version 2002 pack 3
  -Computer: Genuine Intel(r) CPU

  @1.83 GHz T2400
  987 MHz, 1.00 GB of RAM

  Properties of the mouse:

  Typical laptop mouse (the one under the space bar on the keyboard)

  Driver Date: 7-1-2001

  Driver version: 5.1.2600

  Thank you

  Rollwtide88

  This can occur if your version of windows is not genuine. Please call Microsoft for even better your current situation.

• When scrolling down using the touchpad, the cursor jumps to the back arrow

  Hi, could someone tell me why when I use my touchpad, I move the cursor over the arrow down to scroll down and sometimes the cursor jumps on the back button on the screen and goes back one screen and I lose what I'm getting?

  Thank you.  I understand.  I went to the mouse and then to the touchpad device settings and I was able to change.  They were called corner buttons.  They function as shortcuts to different things on each corner of the touchpad.  I disabled it.

• When you write a sentence the cursor jumps at the beginning if I type too fast

  If I type too fast or even at a moderate speed my cursor jumps at the beginning or in another part of the sentence.  I type very slowly in order to complete a sentence.

  I'll guess that you are using a laptop with a touchpad? If Yes, go to control panel > mouse and then look for a tab that relates to your touch pad and then see if you can adjust the sensitivity. Chances are that you are hit while you type.

  I hope this helps.

• Why is that when I touch the button tab the cursor jumps to the bottom of the page

  I copy sentences from one document to another and at one point in the second document is more button tab functions correctly, instead of tab on it goes to the bottom of the document

  Hi Mitchem,

  It seems that when you press the tab key, the cursor jumps to the bottom of the page. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. the problem occurs in Notepad too?

  4. What are the file types of the documents that you use?

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  If the problem does not occur in safe mode, then proceed to clean boot state.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• clicking CTRL + L or CRTL + are the cursor jumps to the beginning or the end of a line vs the next word or previous/tag

  I upgraded to CS 5.5 and code view when I click CTRL + L or CRTL + are the cursor jumps to the beginning or the end of a line (respectively) rather than jumping to the beginning or the end of the word/tag next to it.

  Someone knows how to fix this?  TIA, gwc

  You can change the keyboard shortcuts...

  Go to Edition > keyboard shortcuts

  Click on define duplicate

  Save with a name of your choice

  Under orders from drop down choose Code editing
  You can change all the keyboard shortcuts here to what you prefer

  With my default 2015 install, Ctrl + R doesn't do anything and Ctrl + L tries to link a file to what I chose in Code or design view

• Cursor jumps at the end of the text when you edit the item

  I use a Javascript function, toUpperCase() to convert input in a text field.  However, when users would like to change a piece of the data string in the text, the cursor changes a character only before jumping at the end of the text and continuing.  This function causes the worsening users.  How can I keep the cursor in the right place within the chain and use always toUpperCase without the cursor jumps at the end of the string?

  
  Thank you!

  the best way to test is to remove OnKeyUp = "this.value = this.value.toUpperCase (); ' then check if you still have the problem

  strange that the problem's there even when you replace OnKeyUp with onChange because the function must not be executed until the change is complete. Also replace OnKeyUp, onBlur

  share the results

• Satellite A100-165; while typing the cursor jumps to the other place

  Hello

  When I write with the keyboard sometimes the cursor jumps to another location.
  Just this moment, he jumped at the entrance of 'topic' of wire.
  It's pretty random where he jumps but very annoying, I'm running a Toshiba satellite a100 165;

  Anyone got any ideas of what this could be?

  Hello

  I had the same problem
  I t has not noticed that I touched the surface of touchpad accidentally while typing.
  This is the reason why the cursor jumped.

  You can disable the touch pad using the FN + F9 key combination

  In addition the BIOS update would also be desirable.

  Good bye

• Cursor jump during the strike on Satellite Pro a series

  Please can someone help, every time I have to write emails the cursor jumps to another line or just a few words and she makes me crazy.

  Can anyone help please?

  Here's hopin'.

  Caz,

  I agree with Pacman.
  The accidentally touch touchpad surface can cause this annoying problem.
  I noticed the similar cursor behavior and finally I solve it disable the touchpad (FN + F9) while typing.

  Welcome them

• Qosmio G20: cursor jumps typing the letter

  Hi everyone, my Qosmio G20 gives me headaches! When I try to type a letter or article suddenly the cursor jumps back lines and I find myself typing in the middle of a previous sentence. Then sometimes it just deletes a paragraph I just typed.
  Any suggestions as to why? And more importantly on how to behave?
  I would be happy to advice.

  Thank you.
  Ronnie

  Yes, it's because of the touchpad. To disable and enter in peace, just press Fn + F9. This will temporarily disable the touchpad. When you are finished typing, press Fn + F9 again, it will re-enable the touchpad.
  Later,.

  Alcahest

• Satellite U840-113: pilot missing for the PCI Communications controller

  "* Toshiba Satellite U840-113 - PSU4SE: * Win7-Prof - 64-bit with MS-DVD original on off RAID, no RAID oder installed software RAID driver, internal SSD now like normal running, new installed SSD SSD completely new, all the drivers installed successfully - with the exception of the following device: in Device Manager, I find under the"other devices"the position?" Controller PCI-Communications (single) ". *

  Who can help me to locate / find the right driver for this "PCI Communications controller"?

  What ist this? Do I need this?
  The system seems to work perfectly; I disable this feature?

  Thanks a lot for the helpful answers!

  Hello

  This article from Toshiba may be useful:
  http://www.MyToshiba.com.au/support/items/FAQ/222

  The PCI of Simple Communications controller is part of Intel AMT Management Engine Interface and is related to the networking on your computer.

  You will need to install the driver Intel (r) AMT Management Engine Interface.