Cursor jump during the strike on Satellite Pro a series

Similar Questions

• Cursor jumps while typing on my Satellite Pro

  In recent weeks when I type the cursor jumps somewhere else, at first I thought I type fast then press something I shouldn't, but now its driving me crazy, even in msn or facebook all the ideas everyone.

  Thank you.
  Julie

  Hello

  Can I ask you what model of laptop you have exactly?

  I had the same problem on my laptop, but it wasn't really a problem but a mistake while typing.
  I touched the affected surface accidentally while typing.
  Then I disabled the touchpad through FN + F9 and it solved my problem
  But like I said above; It was more my mistake

• IDE #1 ERROR at the start of Satellite Pro 2100 Series

  Hello... I'm an IDE #1 ERROR displayed at startup of the computer. My CD/DVD player does not seem to be recognized (in the Device Manager the drive is not displayed) and certainly does not at all. I have installed a new CD/player player, this is the original factory supplied.

  In addition, another clue is when I press one of the dvd control buttons on the front of the pop window - next up will appear:

  "The setting of the drive in Toshiba controls is false. If the audio and video control buttons do not work. Please select the correct drive letter.for the internal CD/DVD drive.

  However on the drop-down list there is no drive letter for choose!
  Any help would be gratefully receieved. Thank you, Matt

  HI Matt,

  It seems that your IDE controller is damaged. To ensure the safety of reading, you should recover the laptop with the Toshiba recovery Image and if the failure is on a new system of fees, the IDE controller is bad!

  It may be possible that only the IDE cable is loose, but to kow that it would be better to put the laptop to a Toshiba Service partner!

  To bye daniel

• Satellite Pro L Series - lack of strikes

  I have a Satellite Pro L Series with keyboard, mouse, etc. connected via a Toshiba "USB 2.0 Port Replicator II". When I use the keyboard, occasional keys are ignored (so I have to go back after you type anything to insert strikes ' % is). Also, from time to time a key combination is repeated constantly until I intervene to stop it.

  This does not occur when I use the computer without the port replicator, so the problem seems to relate to the port replicator itself. EDT doesanyone experience a similar problem, or ideas on how to fix it?

  The USB keyboard is maybe defective. Have you tested on another PC?

  Bad drivers can also cause. If you have installed drivers/utilities keyboard, or a mouse Logitech/Microsoft/other, uninstall them. They may be in conflict with the default drivers.

• NB200 - cursor jumps around the screen while typing

  Hello

  When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

  So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

  Any help or ideas greatly appreciated!
  Thesis writing will be more months if the problem persists! :)

  John

  Here is the solution I've used and displayed a few threads down...

  Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

  You will suffer is not since the Cursur jump you met more...

  HTH,

  The f

• Satellite Pro M30 series deactivates the WLan connection

  I have an old Satellite Pro M30 series. Whenever I turn on the wireless signal, the computer closes its doors.
  I assume that the driver's latest version.

  I'm not known for that Yes, there is someone out there who can advise me on where to find the latest driver and install it.

  Assuming this is the problem.

  Thank you
  Gibbsey

  > spend a lot of time on the wireless signal, the computer closes its doors.

  What do you mean exactly by farm down?
  The laptop turns off automatically once the WiFi (switch) card is turned on?

  I put t think this would cause obsolete WLan driver, this sounds like a hardware problem.
  In case it of not possible to use the internal WiFi card, I recommend to use an external USB WiFi dongle.
  Would be the best option

  PS: all the drivers for old Toshiba laptops are placed on the page of the Toshiba UE driver.
  You will need to search the archives (in the product Type click Archive) for a list of the old series of laptop computer.

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• Replacing the battery on Satellite Pro P100

  Hi can anyone recommend a reputable provider in Britain of the batteries for Satellite Pro P100, is a PA3480U-1BRS 6000mAh. ?

  People like DABS.com tried but they are always out of stock.

  As usual, there are plenty of weird sites found on Google but I have never heard of them and they offer for most non-Toshiba clones which I do not know if they are all good or even compatible.

  Ideally, I'll try to find a genuine Toshiba battery if I can

  Do Toshiba to provide directly?
  Thanks to all those who can help you

  Graham

  AFAIK, you can't order directly in battery Toshiba but each service provider authorized in the United Kingdom can get the original for you battery.
  I recommend checking the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  You can find the list of all FSA in the United Kingdom. Connect with some of them and look for information on replacing the battery, costs and delivery times.

  Bye and good luck!

• Can I upgrade the CPU T2310 Satellite Pro L40 - 15A series laptop PC?

  Hi, (I apologize if this has been asked before, but when I search 'Satellite pro l40 series' I couldn't find any relevant response)

  I've been looking around the net & found contradictory answers to this question so far, so I hope that this forum may be able to help.

  I have a 15 D portable computer Satellite pro L40 and I want to upgrade the processor Intel Pentium Dual-Core 1.46 Ghz T2310 an Intel Pentium Dual-Core T4300 2.1 GHz 1 MB 800 CPU or something similar.

  I found the following issues http://www.notebookcheck.net/Review-Toshiba-Satellite-L40-14N-Notebook.7294.0.html

  "f consider you a CPU upgrade, there is not a lot of options." The Intel GL960 value express notebook chip supports only up to FSB 533 Mhz processors. So, does not allow most of the Core 2 Duo CPU update (with 667 MHz). "

  But then, I also read that the GL960 can run 800 MHz processors?

  I also asked the question on ebay to the seller of the CPU T2310 & received this response

  «SHOULD be OK, but your T2310 533 Mhz FSB and the T4300 has 800 Mhz.»

  Motherboards intel more modern should easily accept a 800 mhz cpu, but I cannot guarantee. May be an idea to see if you can find out if there are other models of Toshiba L40, also with 800 mhz chip, because it would be a good indicator.

  And if I can't pass a T2310 because of the 800 mhz too is their a 533 mhz cpu that will be compatible & more powerful for audio production that my current Ghz CPU T2310 1.46.

  I've only had this PC 4 years again, it seems not to be very mobile friendly if this resource could not be designed to handle upgrades.

  Thanks for the tips.

  Post edited by: ib1

  Problem is that upgrading the CPU is not taken in charge and everything you do is at your own risk.
  See also http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Cursor jumps across the screen.

  While trying to navigate around my screen with my mousepad to laptop, the cursor jumps randomly offline.

  • ex: when you try to click on the scroll bar (on a Web page) at the bottom of the page, the cursor jumps to the top of the page.
  • ex: on the desktop, I'll move the cursor over an icon, and the cursor will move to a random point on the screen and continue to move in the direction my finger, said that on a new path.
  • Sometimes, the slider works very well.
  • The problem occurs when you use any program.
  • I don't have the problem "while typing, my mouse moves and clicks on".
  • The movement is just a quick jump from point a to point b. (not rapidly moving around screen clicking everything)
  • If you need more info leave me a message.

  Specifications of the computer:

  -Laptop computer Dell: Latitude D620

  -Race: Service of Windows Xp Professional Version 2002 pack 3
  -Computer: Genuine Intel(r) CPU

  @1.83 GHz T2400
  987 MHz, 1.00 GB of RAM

  Properties of the mouse:

  Typical laptop mouse (the one under the space bar on the keyboard)

  Driver Date: 7-1-2001

  Driver version: 5.1.2600

  Thank you

  Rollwtide88

  This can occur if your version of windows is not genuine. Please call Microsoft for even better your current situation.

• When scrolling down using the touchpad, the cursor jumps to the back arrow

  Hi, could someone tell me why when I use my touchpad, I move the cursor over the arrow down to scroll down and sometimes the cursor jumps on the back button on the screen and goes back one screen and I lose what I'm getting?

  Thank you.  I understand.  I went to the mouse and then to the touchpad device settings and I was able to change.  They were called corner buttons.  They function as shortcuts to different things on each corner of the touchpad.  I disabled it.

• Why my cursor jump around the page when I type

  When I type on Word or an e-mail my cursor jumps around the Aalst page all the time. This could be the cause?

  Hi Phil,

  1. what kind of mouse do you use? Wired or wireless?
  2. is it a laptop or desktop?
  3 when was the last time it was working fine?

  I suggest that you check if the mouse settings are correct.

  You can read the following article and check.

  Change the settings of the mouse

  Method 2:

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• When you write a sentence the cursor jumps at the beginning if I type too fast

  If I type too fast or even at a moderate speed my cursor jumps at the beginning or in another part of the sentence.  I type very slowly in order to complete a sentence.

  I'll guess that you are using a laptop with a touchpad? If Yes, go to control panel > mouse and then look for a tab that relates to your touch pad and then see if you can adjust the sensitivity. Chances are that you are hit while you type.

  I hope this helps.

• Why is that when I touch the button tab the cursor jumps to the bottom of the page

  I copy sentences from one document to another and at one point in the second document is more button tab functions correctly, instead of tab on it goes to the bottom of the document

  Hi Mitchem,

  It seems that when you press the tab key, the cursor jumps to the bottom of the page. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. the problem occurs in Notepad too?

  4. What are the file types of the documents that you use?

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  If the problem does not occur in safe mode, then proceed to clean boot state.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• clicking CTRL + L or CRTL + are the cursor jumps to the beginning or the end of a line vs the next word or previous/tag

  I upgraded to CS 5.5 and code view when I click CTRL + L or CRTL + are the cursor jumps to the beginning or the end of a line (respectively) rather than jumping to the beginning or the end of the word/tag next to it.

  Someone knows how to fix this?  TIA, gwc

  You can change the keyboard shortcuts...

  Go to Edition > keyboard shortcuts

  Click on define duplicate

  Save with a name of your choice

  Under orders from drop down choose Code editing
  You can change all the keyboard shortcuts here to what you prefer

  With my default 2015 install, Ctrl + R doesn't do anything and Ctrl + L tries to link a file to what I chose in Code or design view