Re: Satellite U400 - Toshiba SD Format Utility works do not with SDHC card

Similar Questions

• iTunes 11.4 works do not with my new iPhone 6sPlus

  iTunes 11.4 works do not with my new iPhone 6sPlus.  Do I need a different version of iTunes?

  Yes, you will need a computer, iTunes 12.3.2.

• Satellite U400 - the webcam no longer works

  Hello guys here is my sudden probloema!
  A year ago I bought a laptop
  TOSHIBA - Satellite U400
  with s.o. WinVista 32-bit and webcam built-in chicony etc...
  Last year, everything worked properly, but since a few days, the webcam no longer works.
  Whenever I try to open it, a message from the cam of management software that says "Webcam driver open fail, please reboot or the computer room.

  I tried to do all this: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam...! notebook bios set to day...! useless!
  the strange thing... Although going into Device Manager... the webcam is not there...! But if the launch seems open just then check what caz... Caveat!

  Gan you help me?
  Graziee

  If the cam is not listed in the devices (imaging devices) Manager, this normally means that the hardware is defective. It is possible that there is problem with the cable of the cam. Try to bring back the screen and check if the cam will be recognized again.

• Satellite U400 - 10L - touchpad no longer works

  Suddenly, my touchpad doesn't work.
  Any suggestions that might help with this problem?
  My laptop is Satellite U400 - 10L

  Hello

  I think that you should first check if the touchpad is not disabled.
  Check the FN + F9 key combination.

  If the touchpad still does not work, try reinstalling the driver for the touchpad.

  Welcome them

• Satellite U400 - Windows update asking for Works 8 installation disc

  Hello

  Among the updates for my Windows Vista asks for the Microsoft Works 8 disc, but I don't have it because Vista was already installed when this Satellite U400 has been purchased.

  How can I fix?

  Concerning
  JS

  Hello

  I looked on the MS page because this seems to be a common problem for all users who have purchased a laptop computer with a preinstalled works 8.
  My brother had the same problem and it has solved this problem by using this patch:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=458985c3-9c6f-4049-81cd-0d0389c81f11&displaylang=en

  Check it out. I hope this will help you!

• Satellite A200 - Toshiba Controll buttons stopped working

  Hello

  I used controls Button from Toshiba (play/pause, stop, previous/next buttons) with Winamp and was perfect (but the FN + f2, f5, f6, f7, f8 and f9 were not working, but I didn't mind) on my satellite A200.

  But two days ago I updated the BIOS to the latest version and the FN command started working, but the play, stop and b/f buttons don't work no more (tried with Media Player too).

  I reinstalled the drivers of control and is the same thing.

  You have an idea how I could fix this?

  THX

  Nice! Thanks for the comments!

• Satellite L300 wireless works do not with my particular brand of modem

  Hello, I really need help here.

  My laptop is Toshiba Satellite L300, and I got it since April. I can't connect wireless via the modem I have here at home (netgear DGN2000).
  I can connect to other modems however. I've updated my wireless with Atheros card, but its still does not.
  If anyone has any suggestions please please please help!

  Thank you

  If you can connect to other routers on that it is proof that your laptop WLAN module works properly.
  In my opinion you cannot connect to your one because of wrong settings on your router.

  Your laptop detects your router? Your router is visible for Satellite L300?

• Satellite A300 - FN key doesn't work is not in Windows 7

  I just upgraded my laptop Windows 7 64 bit.
  Since I upgraded the keys FN "F1 - F12" did not work, light on the keyboard lights up when I press the 'FN' key so the button seems to work and the front NATIONAL arow and keys still work but not the keys "F1 - F12.

  Anyone know how to fix this?

  Hello

  Have you installed the package of value added?
  If this isn't it!

  In addition, you should check if the Flash from Toshiba card utility is enabled/activated.
  You can check this in Programs\Toshiba\ Flash Card Utility

  Check it!

• SD card reader not working only not with El Cap.

  The iMac does not recognize the SD card when inserted. Nothing in the Finder. If I leave the card in the slot and restart the iMac, it is recognized. This all started after the upgrade to El Capitan. Anyone?

  Hello leiffromtonsberg,

  Please ask for help in the communities of Support from Apple. Looks like you have problems reading from an SD card with your iMac. Here are the things I would check.

  The first thing that you want to make sure that the data on your Mac is safe. You will need to use Time Machine to backup to an external hard drive. The recommendation is to use an external hard drive twice the size of your hard drive internal. Use this article to help make a backup: use Time Machine to back up or restore your Mac.

  Then, you need to determine what you want to open or to display when you enter the SD card in. If you are looking for pictures to open when you insert the SD card, when you enter the SD card, open the Photos. On the import tab, there is a checkbox "Open pictures for this device". Make sure it is checked. If it is checked, uncheck it and re-check. It is necessary sometimes to get these settings reset.

  If you are looking for only to have a pop up on the desktop image, please go to the Finder, then click the word Finder in the next to the Apple menu bar. Click on Preferences. Make sure that you check the tab general, and that the box for the external drives. If it is checked, uncheck it and re-check. Close the Finder preferences.

  If you are still not able to find the SD card on the desktop or in the Photos, you will want to check if it shows up in disk utility. You can check by opening Finder > Applications > utilities > disk utility. Make sure the SD card is showing correctly in disk utility without having to restart the Mac.

  If you still have the problem, with the insertion of the card and read by the Mac, look for more updates. There may be a new update driver or firmware required to get this working correctly with the new operating system. Use the App Store, updates, or contact the manufacturer of the SD card to see if they can provide updated information.

  Thanks again and have a great rest of your day.

• Key Fn of NB200 Windows 7 does not work do not with ESC and F1 to F8 keys

  I recently bought a Toshiba NB200-136 and everything worked well.

  Flash cards top/bottom of the screen to work with space, ESC and F1 to F8 keys, the rest of the function keys work without showing the cards. Lately, the cards ceased to show and I can't use the Fn + space, ESC, F1 - F8 keys (there simply no reaction), although the rest of the buttons works with the Fn and the LED lights constantly when you press the Fn.

  I have reset the flashcards, checked and changed their settings a few times and they work only if I choose 'Allow the mouse do the maps' option. Even while they do not appear when I press Fn and functions work only when I click one of the cards.

  The problem appeared after (although I don't know if immediately) situation:
  I clicked on start-> Shut down and closed the lid. When I opened the next morning, I saw an empty list of programs that do not stop (it happens quite often, but this is off the top). I clicked 'Cancel' or 'Closed Force' but it didn't work so I pressed the power button for 5 seconds to turn off the computer. I noticed the problem of the Fn after having turned it on and it does not disappear after reset.

  I think that the problem appeared before but disappeared after reboot, so I ignored it.

  I will be grateful for your help.

  All the time that you force Windows to stop instead of leave, he stopped normally (sometimes you must turn it off), you may have lost clusters of data that interfere with the correct operation of Windows. Then I suggest that you start and run scandisk and make sure that you check the box to solve the problems. The other box must not be marked if you suspect bad sectors on the hard disk and it takes a long time so I recommend you to check the box only to find and correct errors.

  Let us know if it worked and the problem is resolved.

  Good luck.

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• HotSpot iOS 9.3.1 works do not with Cisco AnyConnect

  Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect.  I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.

  Ideas?

  TIA,

  DM

  Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.

  I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.

  What is happen? I work with this feature and now I need to change the phone!

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• LifeCam vx 5000 works do not with tinychat

  Earlier today, I bought a lifecam vx5000, I set up and installed without problems, but I can't use it in tinychat.

  I've set up correctly, but I'm the only person who can see my cam. This question doesn't work with tinychat, it is going to work very well with programs like YIM and others, is it all just not compatible?

  Any help would be appreciated

  Hi acidnation,.

   
  As there is no problem using webcam with other programs, there must be some parameters of the tinychat to configure with tinychat webcam to work properly. We recommend that you double check that the settings for the webcam to tinychat or settings in tinychat to set up the webcam.
   
  For further assistance on tinychat, see contact information: http://tinychat.com/about.html
   
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.