Re-start Palm TX

Similar Questions

• Windows 10 & Palm Desktop

  Palm Desktop will work in 10 Windows with download of driver, that I used for Windows 8.1?  I have the version of Palm Desktop 6.0.1 or 6.0.2.

  jmmorrell wrote:
  

  I upgraded to win7 to win10 and can not get the calendar, contacts, or the memo to show.

  Just photos and maps

  What version of Palm Desktop?

  Have you tried right clicking on the shortcut to start Palm Desktop and choose 'run as administrator '?

  See this thread "sticky" at the top of the list for more information about this problem:

  http://h30434.www3.HP.com/T5/Palm-OS-WinMo-hardware-and-software/Palm-Desktop-6-2-2-win-8-shows-media-and-install-try-this/m-p/3535173#U3535173

  WyreNut

• The Palm Desktop icon Disapeeared

  Hello

  Synchronized old palm centro data and with data curent palm centro.

  Now, only Palm Desktop Media show and install icons.

  Make a right-click on the Panel gives only option tailored for media and install.

  My data is all here for calendar, addressbook, Todo and Memo is but it is y not visiable applications Palm Desktip 6.2.2 with 7.02 HotSync manager on Windows 8.1 with 64-bit drivers and bluetooth hotsyc - all this worked well until I sysnced my older desktop with the palm centro which had some information that my current palm centro does not.

  Is there a file that tell applications to start Palm desktop at startup?

  Hello and welcome to the HP support community!

  Try right click on the shortcut for Palm Desktop, and then select "Run as Administrator".   See if the data is displayed.

  WyreNut

• I need Palm Desktop to synchronize to Outlook?

  I'm fed up with various problems with Vista and Palm Desktop and decided to move my Outlook data. I had to do a clean uninstall of Palm Desktop, this last time. I plugged my T | X and Outlook 2003 to see if it would synch, but no go. I have looked everywhere to see if there is a way to implement without redownloading Palm Desktop and so far have not found a. Ideas?

  Thank you

  Yes, you need Palm Desktop to synchronize with Outlook.

  Once installed, launch the 'soft' switch - Button/All start Palm/programs/PIM Sync Conduit/synchronize with Outlook.

  WyreNut

• Palm TX will not start without being plugged in the AC adapter / CC & WiFi turned off completely during authentication device

  My daughter just got a Palm TX away two days ago.  I have 2 questions - we have plugged and loaded as described in the manual, but no matter what I do, it does not start when it is disconnected from the mains (first edition).  When you are connected to the wall, the unit seems to work correctly except for the WiFi, which causes the device to stop trying to autheticate on my network ((deuxieme question).  The only way I can get the unit to turn on once it has closed is with a soft reset while being plugged into the wall.  Once I have unplug the power cord, the device stops and does not start at all with a soft/hard reset either by the power button.  I did a full hard reset last night and let it charge again for 3 hours plugged into a different plug, but I still have the same issues.  Is there a fix or the update available that solves these problems?  Is my daughter S.O.L. because the device is obsolete and is no longer officially supported by Palm/HP?  Any help or idea would be greatly appreciated, thank you!

  Daddy geek

  Hello geekdad, sorry to hear about the TX problem.

  The TX debuted in 2005.  Your looks to the battery is dead for a long time and has other problems as well (Wifi kill him).

  There are websites that will fix Palm PDA, if you choose to do so.  DirectFix.com is one, palmdr.com one another.

  WyreNut

• Palm Pre crazy symptoms: 'phone in offline mode', won't charge battery, won't start, message error "an error has occurred that cannot be resolved.

  This is a long description of a series of problems with my new Palm Pre. You can search text to find your specific problem. There is no solution in my post. Looking for possible answers in future responses.

  I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone was working fine. Last night I plugged the phone and updated the operating system. After, I've selected "Done" and went to bed.

  -First set of questions: 'Phone offline', will not charge battery.

  In the upper left corner of the phone, there is the message "phone offline. Although the phone was in charge all night, it reads "battery of 26%. I called the general number of on the Sprint tech support and we tried the following things:

  (1) the phone reboots (press on and hold the power button / stop, then select 'Disable'. After setting down, hold down power button / power stop.)

  (2) to reset the phone (several ways - call tech support so that you do this properly)

  The individual Sprint and then sent me to another tech support person, likely to level 2.

  -Second series of questions: message error "an error has occurred that cannot be resolved;

  #2 Sprint tech support person had me also to restart and reset the phone in a number of ways. In his own words 'we tried all the palm pre stuff I know' and whenever the phone was insensitive. Often, we received the message error "the phone is in offline mode. We did a full erase and after that the phone will not re-start is no longer. At this point, the error message came up saying "an error has occurred that cannot be resolved" that referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky with a translucent box on background with white text.

  #2 Sprint tech support person then me connected with the support of the Palm and the dance continued. Yet once, we tried a whole bunch of reset and restart and the erasure of the options. Palm support asked me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. Although that was the case he had hold the button "volume +" and connect the phone to the charger. This caused a USB symbol will appear on the phone. When the record was complete, I got an error message which could not run the file. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He me transferred to another person from Palm support that works with Mac users.

  Palm #2 tech support person advised me that I should have selected the download option 'mac' on www.palm.com/rom. I verbally walked him through the series of Web pages, telling him it is said that you need Windows (any version) or Mac (whatever version), but that at no time was there a possibility to download another WebOS doctor for different operating systems. After an exchange of views over she told me that she would have to have someone call back me tomorrow.

  -Third series of questions: phone stuck on the USB symbol.

  So for the moment, the phone is completely useless. Not fantastic. I started the mac on Windows 7 and downloaded WebOS Doc and received the same error message. I also ran Windows Vista virtually and received the same error message. Later this afternoon, I head into work to try the same thing on Windows XP.

  In the meantime, I got on this forum and found a thread that has provided a direct link to the necessary file:

  Palm.CDNetworks.net/Staging/ROM/webosdoctorp100ewwsprint.jar

  After downloading this file, I realized could totally be a virus, I was able to get WebOS Doc work on my computer. It took that I recharge the phone before, and now it's on the screen that says 'do not disconnect your phone' and the full file of 3%. Only... it was completed for almost 30 minutes to 3%.

  I hope that Palm will follow-up with me tomorrow, but I'm leaving on a business trip at 7:00 and I would love to have the thing work. All suggestions are welcome, even if you can just tell me how to get her think disconnected safely before my flight tomorrow. I want to get through security with my phone plugged into my laptop.

  Thank you.

  I picked up the phone at the local Sprint store and the sales ago replaced the phone. They were unable to understand what went wrong and, essentially, has declared a complete failure of the unit. I'm sorry that I'm not able to offer better news, but I hope that this info is useful to you.

• Palm does not start

  Hey all,.

  I've had my (sprint) Palm for about a year now. Last night I put it to charge and when I woke up in the morning, I found that it does not start. I see that the first 2 screens and then it stops and restarts again. It keeps doing this without pressing me anything. Any suggestions on what I can do? I took it to the sprint store to know what is the problem with him, but they said that they would charge me $50 just to know what is the problem with him.

  You can try a warm reset to break the loop (just like a Hard Reset, but hold TOP management pressed instead of the power switch).

  If the reset hot gets you the Launcher, then you need to remove any recent program which may cause the problem.

  If the above does not work, a Hard Reset is your only alternative.  All your information is secure on your computer and can be returned easily by HotSync.  (You did HotSyncs regularly, no?)

  WyreNut

  Message relates to: Centro (AT & T)

• Office Palm does not start

  I have loaded 6.2.2 on my new desktop computer (Vista 64-bit). I know that I cannot support the HotSync, but I still like to use the software. I was doing my import of data and got my software on the new computer, but whenever I started it, I got an error message, Expreprt.exe module could not be found. I just clicked on and the software worked for the first day. Today, when I went to use the software, I got this same message, then an error message which says that the software asks the machine to stop in an unusual way and then I get a message that the palm software has stopped working and it stops. I tried to reload the software but nothing has changed. I added a lot of new data yesterday since it was working and now I can't to him? Y at - there another version that I can get it to work? Is it possible to get this working. I can live without the HotSync, but I really like the software.

  You do not state that you were going back to an earlier version of Palm desktop. This makes a difference and changes the way to proceed at this point.

  You did not export the data, you copied the data files in the user folder. Those will not matter and they are not in the same format as the version of Palm desktop 4.x files.

  In order to get your data in Palm desktop, you will need to install Palm desktop 6.2, and then paste the data files, you have in the correct files in the case of user_name. Or you can copy the entire folder of user name that you have saved in the PALMOS desktop folder in my documents. Make sure you use the same username as before. If you used a user name, you will need to copy and paste the .mdb and. mdb.bak files in the appropriate in the case of user_name folders.

  Once you have data in Palm desktop, use the following method to export the data and then if you want you can clean uninstall and reinstall version 4.x. When you do that, you can import the files.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=28734

  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

• I had a big mistake, my Palm tungsten E2 counldn can't start! pls help me!

  It there!

  I had a big mistake when I installed PIM update for my tungsten E2, although it supports only for tungsten E.

  After installing the PIM update. It took reboot. I rebooted and it does not start. It displays the palm logo after 5 seconds and turned market and stop...

  I confused. My contacts still in there. How I recove my contacts or he'll go.

  Pls help me. Thank you very much!

  

  At this point, it seems that your device is in a reset in a loop because of the incompatible application.

  Try warming system reset in the following link to see if you can stop looping.

  Click on the following link for the Web page of kb.palm.com for the article about the reset procedure.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=887

  If you can get the device to stop a loop, try hotsync and see if you can get your data backed up.

  After synchronization, you will need to do the following to remove the incompatible app of the sync process ' ing.

  Hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Then before of you hotsync your data back you will need to rename your backup folder, to do than go here.

  XP
  C:\Program files\palm or palm one\ [hotsync username]------and rename your backup
  file Backup.Old

  Vista
  Start--> documents\Palm OS Desktop\ [hotsync username]------and rename your backup
  file Backup.Old

  Then hotsync from your current name of hotsync and all your contacts, calendar,
  tasks and memos coming back.

  Show the file extensions for XP or Vista

  XP
  If you cannot view the extensions of file on your PC I would you open a
  folder, go to Tools--> Folder Options--> View (tab) and under Show hidden
  files and folders to uncheck Hide extensions of known file types.

  Vista
  Open control Panel, go to--> View (tab) and under show hidden folder Options
  files and folders to uncheck Hide extensions of known file types.

  If the previous steps do not resolve your problem, you will need to hard reset.

  You can try a hard reset to fix the problem. The hard reset will erase all data on the device.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Palm m505 - asked start for this card can not be executed

  I recently put a Palm m505 second hand, and I want to be able to put the two Mims online on it and ebooks. I have a 1 GB expansion card but when it is inserted, he said "the startup for this card application cannot be run", but if I format the card will hold the docs that I put on it. I am a United Student and couldn't afford a new Palm trees again but needed care nurses pracs. Can you help me, what am I doing wrong?

  This article from knowledge base of Palm on the use of larger than 32 MB with M505s SD cards can help you. Copy it and paste it into your browser, because it does not properly appear in this post:

  http://KB.palmone.com/SRVS/cgi-bin/WEBCGI.exe?St=273, E = 0000000000205665769, K = 4787, Sxi = 10, case is Obj(11276)

  Message relates to: Palm TX

• Palm M505 won't start

  Hello

  After launching a new application (BelTime) I got the message "Fatal error" and can't restart or reset the unit. Wat can I do?

  Hello m505userHB,

  First of all, try to perform a soft reset. To get instructions on how to do this, take a copy of the User Guide and head to the 229 page. Also, make sure that your device is loaded.

  If this does not work, it's time to do a hard reset. That will delete all the information on your device, but all the information that you have synchronized to the computer will be restored on the next HotSync. Steps to perform a hard reset are on page 230 of the same User Guide

• Palm Pre... once on the start screen, it crashes!

  When I want my phone to block, I it would be defined in this way.  The pre will standard standby and say a text comes, I find myself having drag the UNLOCK icon upwards to unlock the phone to display text.  I checked the app "Screen & Lock" I think had accidentally put it, but I did not.

  Under the lock screen & I have:

  Turns off after... 1 minute

  Advanced gestures... OFF

  Ensure UNLOCK... OFF

  Notifications... Show when they are blocked... WE

  Solution anyone?

  This is how its supposed to be I think. In the settings, the 4-digit password and PIN locking options are to secure your phone so that others cannot use it. When those who are still out there the 'lock' screen to help prevent accidental and numbering which do not.

  Message edited by B3NJ4M1N on 10/06/2009 17:58

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• Palm Desktop 4.2: Palm Desktop 4.2 on Windows 32-bit 10

  This isn't a question, some information for fanatical Palm users who might be interested.

  Because I have some old software I want to continue to use, I installed the 32-bit version of Windows 10 on my HP Pavilion 1d21dx g6.

  I used to synchronize my Palm Centro on a machine to Vista 32 bit running Palm Desktop 6.2. Because some very useful features (such as the birthday in the calendar reminders) disappeared in this version, after setting up 10 32-bit Windows, I decided to try to use Palm Desktop 4.2, the version supplied with my Centro. I am happy to report that I have installed the software, did a HotSync, and everything went very well [WELL, i thought THAT this was the CASE - SEE below]. Now I have all my stuff on the phone and on the machine Windows 10, complete with birthday in the calendar reminders.

  The only problem that I had was settting place pipes HotSync for some Palm OS with counterparts of office applications, but in any case, I was able to get the pipes installed by the application of counterpart temporarily running in Windows XP compatibility mode. Once the pipes are put in place, it seem to not need to run anything in compatibility, or administrator mode [WRONG - SEE below].

  I have not heard a lot about the 32-bit version of Windows 10, but I like it. I found that it is very fast, and I still have to find an old Windows application that she will not be executed.

  I found a solution that worked for me. I realized that something on my setup of Palm caused my Palm user directory switch between C:\Program Files\Palm\Username and C:\Users\Username\AppData\Local\VirtualStore\Program Files\Palm\Username, leading to duplicate reports, missing documents and the General problems of HotSync. I do not know what exactly triggers the switch every time (I don't think it was just the question of admin rights as I at first suspected), but I think it had to do with some of my Palm to be older than other applications. In other words, some were apparently designed or implemented to date with new versions of Windows in mind, while others were not, and HotSync Manager could not deal with that, because I had everything installed.

  In any case, everything started to work properly after I installed Palm Desktop 4.2 directly in the folder C:\Users\Username\AppData\Local\VirtualStore\Program Files\Palm\

  (Of course, in all the above examples, substitute your own "Username" username.)

  My thought was to avoid the switch between the location of the traditional repertoire of the Palm and the location of the user directory style Vista by installing Palm software directory in the Vista style directory. I have not experienced any important matter. The only minor issue I have is that HotSync Manager does not automatically start despite being listed in the Startup tab in the Manager of tasks. I'm not going to tinker with compatibility modes and privileges trying to HotSync Manager starts when the computer starts. It is easy enough to just run it whenever I have to synchronize.

  You will also need to consider the order in which you install your office-side applications. For example, I found that one of my apps should be executed only once with admin rights so that he could establish his lines. Which seems to trigger a change in the location of the user directory for another application that I use - that does not allow the user to specify an installation directory. I got around this by implementing these apps in the order that I mentioned, while the other user directory would not be changed after creating the first led her.

  Of course, my solution has its limits, but it works for my single-user installation.

• Palm Desktop 6.2.2: Palm Desktop 6.2.2 with Windows 10

  What is someone having the same problem:

  I installed Palm Desktop 6.2.2 on my Windows 10 system, sync'd and everything worked fine for about 30 days approximately.  The other day I started my computer, went to Palm Desktop and found all the files (in the left panel) disappeared EXCEPT media and install it.   I uninstalled and reinstalled several times (from sources stored and newly downloaded) and still have the same problem.

  Since the installation of Windows 10 I found Microsoft seeks to establish, it's default applications with a few applications (a real fight with MS / Chrome and MS / Adobe PDF).

  At that time, the folder that I can sync's Photo.   All other folders appear sync, but do not appear in the left vertical navigation bar.

  Everyone knows the same problem?

  Comments are welcome.

  Note:

  Hello and welcome to the HP support community!

  The search function is your friend!

  See this link:

  http://h30434.www3.HP.com/T5/Palm-and-WebOS/Palm-Desktop-6-2-2-win-8-shows-media-and-install-try-this/m-p/3535173/thread-ID/98892

  WyreNut