Re: The wonderful 'Enter the password administrator or power on password' pop up blue screen

Similar Questions

• 'Enter the password administrator or power on password' pop up blue screen

  Hello

  hope you can do the same for me,

  Windows 7 Dv7 asking the same password admin password power

  my code is 77398719

  cheers in advance

  Please try this password = 68090339

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• IM in safe mode because that's the only way to get into my computer it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?

  Hello I'm in safe mode because it's the only way to get to my desk, it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?

  Hello

  Do a restore of the system using the same safe as you would in Normal Mode.

  http://bertk.MVPs.org/html/restoresysv.html

  http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php

  See you soon.

• whenever I try to install the new software on my computer goes to a blue screen and stop making

  Original title: HELP!

  whenever I try to install the new software on my computer goes to a blue screen and stop making

  Hello

  It takes a lot more information

  What operating system

  etc.

  read this

  How to ask a question

  http://support.Microsoft.com/kb/555375

  -What you trying to do?
  -Why are you trying to do?
  -Do you try already, why and what was the outcome of your actions?
  -What was the exact error message you received?
  -How long have you been experiencing this problem?
  -Have you searched the relevant forum/newsgroup archives?
  -Have you tried all the tools or KB articles or other resources?
  -Have you recently installed or uninstalled any hardware or software?
  -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

• How can I run CHKDSK/F of the set up menu windows XP computer goes only blue screen?

  The computer does not start and does that blue screen error message * STOP: 000000024 (0 x 82FCE248, 0 x 00190203, 0 x 000000000, 0xC0000102)

  I think it have to do with AVG anti program virus that I was updating it when it crashed and now gives me the blue screen
  Thanks for the tips...

  For this STOP error (which indicates a problem with the NTFS file system), I always start with a chkdsk /r first starting in the Console recovery XP and its own runtime, THEN fix the problems.

• After the installation of the driver software my windows 2008 Server gives a blue screen. How can I go bak to original configuration?

  I get a blue screen after installing the drivers for my TM-T88IV from the internet. So I now can't log on because of the blue screen.
  How to return to the original state.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Windows Server général assistnce more far.

• How to stop her "enter network password" pop-up? (Windows XP Pro)

  I'm unable to send or receive e-mail, but also a problem.
  The server does not recognize my name and my password.

  I'm unable to send or receive e-mail, but also a problem.
  The server does not recognize my name and my password.

  You must manually go to microsoft outlook and check again the information, as it is y a. not the configuration screen. You must edit your pop3 to HTTP and then any e-mail provider, use: www.yahoo.com and enter it in just like that. Then update your password and other and voila your in. I have this problem all the time. Whenever you change your password, you must update outlook manually. I do not use outlook for more than one e-mail address. Just pick one and use it.

  Please let me know if this helped.

• Is there an external link to use to restore Windows XP Home to original values? I can only use safe mode at the moment that my computer shuts down automatically (with blue screen)

  Running Windows XP home SP3. eMachines T6528 AMD Athlon 64 3500 + processor, nvidia GeForce 6100 GPU
  I downloaded and executed a double file Finder and SEVERAL files deleted by mistake.

  According to these instructions, you are not supposed to do that! Look at them again. They are on p. 137 (or p. 145). (P. 137, printed on the bottom or the p. 145 of the .pdf file!)

  Remove all the drives and physically disconnect all USB and network connections first!

  Then either start as you normally would (if you can) and select:

  Start | All programs | System recovery | System recovery

  and then click Yes.

  Or if you are unable to start up as usual, you will need to press F11 at the beginning - almost immediately after the ignition of the PC.

  THEN, when you are prompted to, you can insert the disc. :-)

• Computer guard stop and causing the blue screen Error Message

  With the help of a Dell Vostro 200 with Windows XP Professional.  Suddenly, after you have moved the computer from one office to the next, she regularly stops and we get this blue screen that says:

  Technical information:

  STOP: 0X000000D1 (0 X 00000060, 0XAA2AD341, 0000002 0 X, 0 X 0000000)

  WUSB54gcv3.sys - address AA1AD341 base at AA15B000, Datestamp 48 b 66753
  Beginning physical memory dump
  Total physical memory dump
  For more assistance, contact your administrator or technical support group.

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  Drive_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this Stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure any new hardware or software is installed correctly.  If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If the problem persists, disable any newly installed hardware or software, disable memory options such as caching or shadowing the BIOS.  If you need to use Mode safe mode to remove or disable components of your computer restarts, press F8 to select advanced startup options, and then select Safe Mode.

  Can anyone help?  I installed an update of the necessary BIOS and that did not help and the computer is configured to have Windows Installer automatically what is updated, it needs.

  Thank you.

  Pages 29 and 30

  http://support.Dell.com/support/eDOCS/systems/ins9300/en/OM/om_en.PDF

  Hope this helps, Gerry Cornell

• Blue screen associated with the WiFi [ntoskrnl.exe]

  Hello, I got several BSOD today. I discovered they are related to the wireless lan connection, because I get them when I tried to use the wi - fi connection. Can someone help me? I don't know why I get these errors.

  The Minidump files: http://sdrv.ms/RycBXI

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check were CAUSE D1 athrx.sys Atheros WiFi driver (wireless).

  BugCheck D1, {1, 2, 0, fffffa800b65d698}
  Probably caused by: athrx.sys (athrx + 299621)
  MODULE_NAME: athrx
  Nom_image: athrx.sys
  FAILURE_BUCKET_ID: X64_0xD1_athrx + 299621
  BUCKET_ID: X64_0xD1_athrx + 299621

  athrx.sys as of 07/24/2012 Atheros WiFi driver (wireless).

  fffff880 '07625000 fffff880' 079d 8000 athrx T (no symbol)
  Loaded symbol image file: athrx.sys
  Image path: athrx.sys
  Image name: athrx.sys
  Timestamp: Kills Jul 24 08:03:45 2012 (500EB951)

  1. verify or update driver Atheros WiFI (wireless).

  Drivers Atheros WiFi.
  http://www.Atheros.cz/Atheros-wireless-drivers.php

  Verson is very common, so there may not be a newer version available. Otherwise try to reinstall
  it. you may need to go back to an older version of the driver. And there might be a problem
  with the actual hardware device.

  2. check with the Sony Support, their drivers and documentation online and ask in their forums
  on known problems.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forums
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  BiosVersion = R1190V3
  BiosReleaseDate = 05/09/2011<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset="">
  and drivers of major on-board and separate devices.
  SystemManufacturer = Sony Corporation
  SystemProductName = VPCF22S1E
  Family = VAIO
  SystemVersion = C6091KF8
  SystemSKU = n/a
  BaseBoardManufacturer = Sony Corporation
  BaseBoardProduct = VAIO

  3 run DriverVIew - VIEW driver Microsoft set hide - update those without drain in their
  names (see Update methods in the next post).

  4 use the other methods in the troubleshooter below and in the next message.

  =============================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  in this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ==============================================================

  BCCode: D1 0x000000D1

  Check these KB

  Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
  from sleep or standby extended: "STOP: 0x000000D1".
  http://support.Microsoft.com/kb/978982

  Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
  system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
  http://support.Microsoft.com/kb/2320550

  Those 7 other KB Articles are available
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

  --------------------------------------------------

  Think video drivers especially if it may be others. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
  antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
  When you arrive at the driver and tests of memory sections do reference to generic methods in following
  message and then back to the if necessary troubleshooting tool.

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  
  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the professional, full and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error on blue screen (BSOD) during and after the installation of Windows 7

  I had to reinstall Windows 7 using the recovery partition. When installing I kept getting blue screen errors and even now I still get the BSOD a few minutes. I have no problem in safe mode.

  My laptop is a Satellite C650D - 12 c. I tried to update the BIOS, but I can't do it in safe mode. What should I do next?

  Saved on the HARD drive recovery image is tested so everything should be OK with recovery image installation.
  What you can try is to use the Microsoft installation disc to see if the same thing will happen again.

  If Yes, I'm afraid, you need professional help with this Portable Mr. probably guaranteed so the service guy should check this.

  You created the recovery DVDs?
  BTW: I think that the update of the BIOS is not solution. Recovery facility must operate with this original version of BIOS.

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• I put my speakers or a microphone to go into the sound is terrible, and he put me on a blue screen that says crash dump HELP

  I went to control its embedded on my micro hit some button that met my speakers or my microphone, now there is a terrible noise of comign out of my speakers and my computer went to a blue screen that says something about a crash dump it please help I just reset my volume control , so they will come back the way they came when I bought it.

  Hello

  1. what operating system is installed on your computer?
  2. you remember to make changes to your computer before the problem?

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  Restart your computer and Open the troubleshooter of Audio playback and check if this solves the problem.

  Step 2:

  You may also Update your audio drivers and see if that solves the problem.

  Step 3:

  If the computer goes into BSOD again, please follow the steps in this article.

  Resolve stop (blue screen) error in Windows 7

• Blue screen when you perform the search for live TV in Windows Media Center on the new Lenovo A700

  I just got my new Lenovo IdeaCenter A700 yesterday and have been busy setting up.  The computer is equipped with a built-in TV Tuner and I tried to put in place the TV on it so I could watch TV on my computer.  I have RCN for cable and a cable TV that gets first plugged into the decoder and then I plug the cable to the TV - so I just plugged this cable on my computer instead of the TV.

  I used the following Web site to set up using Windows Media Center - http://www.howtogeek.com/howto/9166/learning-windows-7-setup-live-tv-in-windows-media-center/.  After that I put in my zip code he sought the power of the signal or something and then I got a blue screen.  To restart the computer the information below has been MS. error message This happened to me twice.

  Anyone know how to fix this? Or otherwise, I just want to use my computer to watch TV on, and if I can do this other method other than Windows Media Center free I am happy to do.

  Please let me know if you need more information.

  ************

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 4A
  BCP1: 0000000076E5FF2A
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF8800AADECA0
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\102110-15849-01.dmp
  C:\Users\fennis\AppData\Local\Temp\WER-36941-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  This seems to be resolved now... it was maybe an update of windows, like when I rebooted my machine it updated automatically and after that he worked all of a sudden!

  Anyway, now it shows a black screen and no sound for all channels, but that is a different problem... and I'll look in to that.

  Thanks for your help.