Read a character from a file

Similar Questions

• Remove the read-only attribute from all files in a folder

  How to remove the read-only attribute from all files in a folder. I tried to use the properties and used the attrib command, but all I see is when I right click on the folder, selecting Properties, it shows once again

  

  I followed the forums, but I'm really confused. Can someone help me with this. Thanks in advance

  I would like to start by finding which file is read-only again. This is probably a file as well as a miniature file desktop.ini.  An easy way to find it is to go to the details view, turn on the column heading "Attributes" and search for all files with the attribute value "R":

  In this example, the key of SB file is read-only:

  

• "Oracle reads the setting from the file when you start... what PART of Oracle?

  I have done this for years, but I don't know the answer to this question.

  I don't know how it's done on windows, but on * nix install, it's oracle that does almost everything, it is the executable that is behind most, if not all background processes.  It simply works with functions and different identities.

  In doing so:

  /export/home/oracle> export ORACLE_SID=nothere
  /export/home/oracle> sqlplus /nolog
  
  SQL*Plus: Release 10.2.0.3.0 - Production on Thu Dec 13 10:49:23 2012
  
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  
  SQL> connect / as sysdba
  Connected to an idle instance.
  SQL> startup nomount;
  ORA-01078: failure in processing system parameters
  LRM-00109: could not open parameter file '/u01/app/oracle/product/10.2.0/dbs/initnothere.ora'
  

  led me to the error message file $ORACLE_HOME/oracore/mesg/lrmus.msg which is said in the header:
  "/ NAME".
  / lrmus.msg - message file for setting Manager (LRM) basic error
  / DESCRIPTION
  "/ List of all of the LRM database error messages.

  So, I think that this is part of the "bootstrap" code in the oracle itself executable that runs before the spawning of himself in all other versions of himself.

  John

• Read data from the file into ArrayList

  Hello
  I have a class called product describing the charactristics of products such as the name, id, price etc.. I have the whole set and use the get methods in my class of product. I store the information on my products in an ArrayList. I can write the information on my products in a file.
  so far, but so good...
  
  I want now to re-read the data from the file and store it in my list of tables again. I know I can use Parsing and read in data in an ArrayList as String, int, double etc. but is anyway to read in from 'Product' (then it would be up to my class of product)?
  
  Thank you in advance.

  1. are you aware of serialization?
  2. get a name, I love not dealing with numbers.

  DB

• Import data from text file of control of the ring.

  Is it possible to import data to a text ring with labview control.

  I have several definitions of register in the ring controls, but manual entry would take a lot of time.

  Was wondering if there was more automatic way, I could read the values from a file.

  Thank you

  Jim

  Using the first method gives you the ability to extend such that each column specifies a control of the ring if you need fill the multiple rings.

  This example assumes that all of the three rings contain the same number of elements. If this isn't the case, you will need to create a Subvi, which removes the empty elements. [Edit - create a text file that contains a column for each ring, separated by a tab character.]

  

• Reads a document from the FTP.

  Hello users of Livecycle.

  I use Livecycle workbench ss4 build a process, to read a document from the file system, but now I want to read a document from FTP (the path as "http://192.138.1.201/Template/pdfs/Template.pdf"), how the process?

  Can someone help me?

  Thank you very much

  Jing

  Go to the Foundation and use the FTP Get service to retrieve the file.

• First character left in file by reading the first line in text file

  When you use the function of reading text from a file file, I noticed that the 1st character is left in the file. I read the line correctly.

  When adding a 2nd line this character is in the file.

  Part vi code is attached.

  Any ideas?

  Thank you.

  Elik

  Can you attach a file of real data and tell us what you mean by "first character". The number of characters per line do you have?

  Can you tell us what you see in the modified file and what you expect to see.

  Everything seems good.

  1. Read you the first line and so the file pointer is just after the first line
  2. You set the size of the file at the end (seems unnecessary, because it does nothing). The file pointer is always right after the first line.
  3. You write the first line you read concatenated with a second line. It will be written on the current file pointer, i.e. after the existing line
  4. The first line is in the file twice, as planned.

  Setting the file size to the 'end' on an existing file does not have something useful. If you want to set the position of the file instead?

  Try to set the file position from and new data will be written at the beginning of the file.

• How to implement the reading of data from a matte file on a cRIO?

  Hi all!

  I'm still not sure, it is plausible, but I'll ask rather before you begin complicating. So far, I found no useful information on reading in the data to a device of RT from a file (type of a simulation test - data is simulated).

  I have the MatLab plugin that allows the storage of data read a MAT file, which has a number of columns that represent the different signals and lines representing the samples at a time (depending on the time of the sample - sample every time has its own line of signal data).

  I have no idea how to implement this at cRIO.

  The idea is:

  I have some algorithms running on the controller of RIO in a timed loop. As the entries of these algorithms I need to access each of the values of columns in the row, which is the time of the sample (sort of a time series - without written actual times).

  I am fairly new to RT and LV development, so any help would be appreciated.

  Thank you

  Luka

  Dear Luka!

  I think the reading of all the samples in a single channel is exactly what you need here, because reading the files may take some time and is not deterministic, so it is best to read all the data in memory (or if this is not feasible due to problems of size, fairly large pieces may be sufficient). The table read can be provided and then in the loop simulating outings, something like this:

  

  I used here separate channels so it's more graphic, but you can build all the channels in a 2D array and array index corresponding to the samples fom 1 who. You can also use for loops with indexing as tunnels are setup and then you won't need the index functions and the number of iterations is also set automatically, but you have to take care of synchronization settings.

  Best regards:

  Andrew Valko

  National Instruments

• Message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file:

  Receive the following message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file?: MSI

  * original title - cannot open files with .msi extension *.

  You try to open this leave a link online? If yes I would like to try and save the MSI on your desktop and then try to open.

• Toshiba Recovery For Vista: 10-FC06-0002 "cannot read from source file or disk" Preinst.8

  I recently lost a hard drive and I had a new installed in a laptop Toshiba Satellite A305-S6905.  I ordered the recovery media and when I run it it starts copying files and then publishes the message "Cannot read from source file or disk" and says it's PREINST.8.  I don't know what that means.  The hard drive is new, the recovery media is new, and I don't know how to go further.  It gives me the ability to ignore and I anpother error message which says 10-FC06-0002, and that the recovery does not and click on 'ok' to restart the computer.  I'm at an impasse in circles.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You will need to contact Toshiba re problems with their recovery media.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• BB10 - Audio/video in HTML5 - reading file from the file system

  Hello.

  I tried to read a file from the file system on the BB10 Dev Alpha, using the HTML5 video + HTML5 Audio implementation, but it seems to not work for me with the following source code:

  var audio = document.createElement('audio');
  audio.src="/accounts/1000/shared/music/testfile.wav";
  audio.controls = true;
  
  var video = document.createElement('video');
  video.src="/accounts/1000/shared/videos/testfile.avi";
  video.controls = true;
  

  Referring to the HTML5 Audio API documentation and Video of HTML5 , I used the example presented here source code, but I still get the following error message:

  

  Anyone now how to get it working or if it is not yet implemented in the BB10 WebWorks API/framework?

  Well, I believe that what could be the problem.  In order to access to the / shared the location of the folder, your application should allow the permission to do so.  This can be done by adding the following to your config.xml file:

  
      access_shared
  
  

  Next, you need to whitelist the way file:/// by adding an element to access.  I remember that's how its done:

  Note You can whitelist all areas using the following:

  Hope that helps.

• On a PC using Windows and Adobe Reader, I sent 10 PDF files in a zip file and each label of the PDF file with a number from 1 to 10, so that they appear in the order I want. Numbered 1 to 9 records fell in sequence automatically, but number 10

  This is my first time using this forum. I hope that my question made its appearance and that this space is to respond to the answers possible, but just in case, here's my question again:

  On a PC using Windows and Adobe Reader, I sent 10 PDF files in a zip file and each label of the PDF file with a number from 1 to 10, so that they appear in the order I want. Numbered 1 to 9 records fell in the sequence automatically, but the number 10 appears under the number 1 instead of below the number 9. I googled the problem, do not see addressed. I called Microsoft, and they said it's a matter of Adobe. If anyone can help I would be grateful.

  Thank you.

  Not an Adobe issue at all. If you want your files to a single digit (1-9) to appear before the 10, you must add a zero at the beginning.

  01

  02

  03

  04

  05

  06

  07

  08

  09

  10

• I need to create a PDF from InDesign file that people can change in Reader or Acrobat

  I need to create a PDF from InDesign file that people can change (for example, change a name of 'John' to 'Johnny') of Adobe Reader or Adobe Acrobat. I already looked at forms, but they do not keep your police, faces and sizes colors and just do everything is selected as a form of black text, 12pt, Times New Roman.

  Can anyone here help me?

  Vincent,

  If you use Acrobat pro, build your .pdf file, and then save it as (french version):

  

  ... so that everyone using Acrobat Reader (or Pro, of course) can change the file .pdf (with restrictions), add comments...

  If you want to try to 'protect' your .pdf file, you can try with this (in the menu 'Preferences' (french version)):

  

• I can't unzip it lines read from a file

  I created a VI based on reading VCard VI in the LabVIEW Basics I manual. I use a loop for read 15 lines of a file in a table.  If I simply add an indicator, as done in the VCard VI read, I see all 15 lines. However if I convert the table to a cluster and try to unpack it I get only nine values.

  It is fundamentally wrong to use "table-cluster" followed "unbundle" to decompress (your words!) the elements of an array. Why do you take the detour on a completely different data structure?

  The correct way is "Board index", it can be resized to any number of items (and also lets you choose only specific elements if you would like to wire the index). There is no need to jump through flaming hoops for example using multiple primitives and specifying the cluster size.

  If the first index is unwired default to zero. All other index default unwired + 1 terminal index above it. So, if you don't the wiring of the indices, you will get 0,1,2,3,4... If you the wiring would be the second index with a 5, you will get the 0,5,6,7,8... Depending on the size of the node. Simple! Right?

  

  Of course many times you just want to see all the elements of an array of small. In this case you will use an indicator array directly. Without the need for code!

  Cluster table is used for example, if you want to put the data on a graph with N channels.

• Read the character 3 + 4 of file name and move it to another position

  Hello

  I need a JavaScript to read the name of my file (I have one for the full filename) and especially the 3rd and 4th position of the file name.

  The characters on the position 3 and 4 must be moved to the position just before the extension.

  Example:

  4 pIN12345.pdf (old name) should be 4 P 12345_en.pdf

  Now, I have the following script to extract all pages in an existing pdf file to separate pages with the suffix still before the extension

  / * Extract Pages to the file * /.
  
  var re = /. * \/|\.pdf$/ig;
  var filename = this.path.replace(re,"");
  
  {
  for (var i = 0;  I < this.numPages;. i++ )
  this.extractPages

  ({
  Start: I,.
  nEnd: I,.
  cPath: filename + "_page_" + (i + 1) + "3_en.pdf".
  });
  };

  Can someone help me to put me on the right track?

  It is not related to Scripture, it has to do with the output parameters of the Action...